[U-Boot] [PATCH 1/2 RFT] sunxi: power: Add AXP806 and AXP808 support

[Jaehoon Chung]

On 02/27/2017 04:01 AM, Rask Ingemann Lambertsen wrote:
> An X-Powers AXP806 or AXP808 PMIC is usually found on boards using the
> Allwinner A80 ARM SoC. This patch adds support for the PMIC's regulators
> and sets up the runtime address and master/slave mode in pmic_bus_init().
> 
> AXP806/AXP808 support is enabled by default on all MACH_SUN9I boards.
> 
> Because there are boards with both an AXP806 and an AXP809,
> drivers/power/Kconfig and arch/arm/mach-sunxi/pmic_bus.c are changed to
> make it possible to have more than one PMIC enabled at a time.
> 
> Signed-off-by: Rask Ingemann Lambertsen <rask at formelder.dk>
> ---
> This patch needs to be tested on the following boards which I don't have:
> Cubietech Cubieboard4
> Merrii A80 Optimus
> 

As ChenYu, This patch need to separate to some more patches.

Best Regards,
Jaehoon Chung

>