[U-Boot] [PATCH v2 1/2] arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings

[Markus Niebel]

From: Markus Niebel <Markus.Niebel at tq-group.com>

We have a Kconfig name for the module types. Let's Use it.
Some feature selections and configurations are based on the
module. Module selection selects the CPU type.

Signed-off-by: Markus Niebel <Markus.Niebel at tq-group.com>
---
 board/tqc/tqma6/tqma6_mba6.c | 13 +++++++------
 include/configs/tqma6.h      |  8 ++++----
 2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 4db1a0b..b51751d 100644
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -54,19 +54,19 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
 	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
 
-#if defined(CONFIG_MX6Q)
+#if defined(CONFIG_TQMA6Q)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII	0x02e0790
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM	0x02e07ac
 
-#elif defined(CONFIG_MX6S)
+#elif defined(CONFIG_TQMA6S)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII	0x02e0768
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM	0x02e0788
 
 #else
 
-#error "need to define target CPU"
+#error "need to select module"
 
 #endif
 
@@ -259,14 +259,15 @@ int board_phy_config(struct phy_device *phydev)
 {
 /*
  * optimized pad skew values depends on CPU variant on the TQMa6x module:
- * i.MX6Q/D or i.MX6DL/S
+ * CONFIG_TQMA6Q: i.MX6Q/D
+ * CONFIG_TQMA6S: i.MX6S
  */
-#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q)
+#if defined(CONFIG_TQMA6Q)
 #define MBA6X_KSZ9031_CTRL_SKEW	0x0032
 #define MBA6X_KSZ9031_CLK_SKEW	0x03ff
 #define MBA6X_KSZ9031_RX_SKEW	0x3333
 #define MBA6X_KSZ9031_TX_SKEW	0x2036
-#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#elif defined(CONFIG_TQMA6S)
 #define MBA6X_KSZ9031_CTRL_SKEW	0x0030
 #define MBA6X_KSZ9031_CLK_SKEW	0x03ff
 #define MBA6X_KSZ9031_RX_SKEW	0x3333
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 1c0a762..2a63686 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -18,17 +18,17 @@
 /* #endif */
 
 /* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#if defined(CONFIG_TQMA6S)
 #define CONFIG_SYS_TEXT_BASE		0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#elif defined(CONFIG_TQMA6Q)
 #define CONFIG_SYS_TEXT_BASE		0x4fc00000
 #endif
 
 #include "mx6_common.h"
 
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#if defined(CONFIG_TQMA6S)
 #define PHYS_SDRAM_SIZE			(512u * SZ_1M)
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#elif defined(CONFIG_TQMA6Q)
 #define PHYS_SDRAM_SIZE			(1024u * SZ_1M)
 #endif
 
-- 
1.9.1