[U-Boot] [PATCH v2 0/2] Support additional Variant for TQMa6 SOM

[Stefano Babic]

On 28/02/2017 16:37, Markus Niebel wrote:
> From: Markus Niebel <Markus.Niebel at tq-group.com>
> 
> Add support for the SOM variant featuring i.MX6DL. This needs a new
> DCD config. The first patch is a small preparation.
> 
> Changes for v2:
> - Rebase on u-boot-imx master
> - Fix minor issues in defconfig files
> 
> Markus Niebel (2):
>   arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings
>   arm: imx6: tqma6: add support for TQMa6DL variant
> 
>  board/tqc/tqma6/Kconfig            |   7 +++
>  board/tqc/tqma6/README             |   3 +
>  board/tqc/tqma6/tqma6.c            |   7 +++
>  board/tqc/tqma6/tqma6_mba6.c       |  14 +++--
>  board/tqc/tqma6/tqma6dl.cfg        | 125 +++++++++++++++++++++++++++++++++++++
>  configs/tqma6dl_mba6_mmc_defconfig |  36 +++++++++++
>  configs/tqma6dl_mba6_spi_defconfig |  37 +++++++++++
>  include/configs/tqma6.h            |  16 ++---
>  include/configs/tqma6_mba6.h       |   5 +-
>  9 files changed, 235 insertions(+), 15 deletions(-)
>  create mode 100644 board/tqc/tqma6/tqma6dl.cfg
>  create mode 100644 configs/tqma6dl_mba6_mmc_defconfig
>  create mode 100644 configs/tqma6dl_mba6_spi_defconfig
> 

Fine with me - I have dropped the old ones from -next, I wait a couple
of days if someone has comments, then I merge them again in -next.

Regards,
Stefano

-- 
Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================