[U-Boot] [PATCH 1/2] ARM: uniphier: enable Cadence eMMC controller for LD11/LD20

[Masahiro Yamada]

Enable SDMA (Single Operation DMA) for LD11, but not for LD20.
The SDMA does not work for LD20 boards because they are generally
equipped with more memory than fits in the 32 bit physical address
space supported by the SDMA.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 configs/uniphier_ld11_defconfig | 4 +++-
 configs/uniphier_ld20_defconfig | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/configs/uniphier_ld11_defconfig b/configs/uniphier_ld11_defconfig
index e939124..9c77b10 100644
--- a/configs/uniphier_ld11_defconfig
+++ b/configs/uniphier_ld11_defconfig
@@ -4,7 +4,6 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ARCH_UNIPHIER_LD11=y
 CONFIG_MICRO_SUPPORT_CARD=y
-# CONFIG_MMC is not set
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld11-ref"
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -28,6 +27,9 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
diff --git a/configs/uniphier_ld20_defconfig b/configs/uniphier_ld20_defconfig
index 449093a..190ebd5 100644
--- a/configs/uniphier_ld20_defconfig
+++ b/configs/uniphier_ld20_defconfig
@@ -28,6 +28,8 @@ CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MMC_UNIPHIER=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
-- 
2.7.4