[U-Boot] [PATCH 2/2] LS2080A: Add validation of MC & DPC images.

york sun york.sun at nxp.com
Wed Jan 4 16:50:44 CET 2017


On 01/04/2017 04:16 AM, Udit Agarwal wrote:
> Add secure boot validation of MC, DPC images using
> esbc_validate command.
>
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
> ---
>  include/configs/ls2080aqds.h | 19 +++++++++++++++++++
>  include/configs/ls2080ardb.h | 26 ++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
>
> diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
> index 838568f..02ad2e8 100644
> --- a/include/configs/ls2080aqds.h
> +++ b/include/configs/ls2080aqds.h
> @@ -365,6 +365,7 @@ unsigned long get_board_ddr_clk(void);
>
>  /* Initial environment variables */
>  #undef CONFIG_EXTRA_ENV_SETTINGS
> +#ifndef CONFIG_SECURE_BOOT
>  #define CONFIG_EXTRA_ENV_SETTINGS		\
>  	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
>  	"loadaddr=0x80100000\0"			\
> @@ -378,6 +379,24 @@ unsigned long get_board_ddr_clk(void);
>  	"kernel_size=0x2800000\0"		\
>  	"mcinitcmd=fsl_mc start mc 0x580300000"	\
>  	" 0x580800000 \0"
> +#else
> +#define CONFIG_EXTRA_ENV_SETTINGS		\
> +	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
> +	"loadaddr=0x80100000\0"			\
> +	"kernel_addr=0x100000\0"		\
> +	"ramdisk_addr=0x800000\0"		\
> +	"ramdisk_size=0x2000000\0"		\
> +	"fdt_high=0xa0000000\0"			\
> +	"initrd_high=0xffffffffffffffff\0"	\
> +	"kernel_start=0x581100000\0"		\
> +	"kernel_load=0xa0000000\0"		\
> +	"kernel_size=0x2800000\0"		\
> +	"mcinitcmd=esbc_validate 0x580c80000;"	\
> +	"esbc_validate 0x580cc0000;"		\
> +	"fsl_mc start mc 0x580300000"		\
> +	" 0x580800000 \0"
> +#endif /* CONFIG_SECURE_BOOT */
> +
>
>  #ifdef CONFIG_FSL_MC_ENET
>  #define CONFIG_FSL_MEMAC
> diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
> index 32fa0eb..d3e34ae 100644
> --- a/include/configs/ls2080ardb.h
> +++ b/include/configs/ls2080ardb.h
> @@ -328,6 +328,7 @@ unsigned long get_board_sys_clk(void);
>
>  /* Initial environment variables */
>  #undef CONFIG_EXTRA_ENV_SETTINGS
> +#ifndef CONFIG_SECURE_BOOT
>  #define CONFIG_EXTRA_ENV_SETTINGS		\
>  	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
>  	"scriptaddr=0x80800000\0"		\
> @@ -348,6 +349,31 @@ unsigned long get_board_sys_clk(void);
>  	"mcinitcmd=fsl_mc start mc 0x580300000"	\
>  	" 0x580800000 \0"			\
>  	BOOTENV
> +#else
> +#define CONFIG_EXTRA_ENV_SETTINGS		\
> +	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
> +	"scriptaddr=0x80800000\0"		\
> +	"kernel_addr_r=0x81000000\0"		\
> +	"pxefile_addr_r=0x81000000\0"		\
> +	"fdt_addr_r=0x88000000\0"		\
> +	"ramdisk_addr_r=0x89000000\0"		\
> +	"loadaddr=0x80100000\0"			\
> +	"kernel_addr=0x100000\0"		\
> +	"ramdisk_addr=0x800000\0"		\
> +	"ramdisk_size=0x2000000\0"		\
> +	"fdt_high=0xa0000000\0"			\
> +	"initrd_high=0xffffffffffffffff\0"	\
> +	"kernel_start=0x581100000\0"		\
> +	"kernel_load=0xa0000000\0"		\
> +	"kernel_size=0x2800000\0"		\
> +	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
> +	"mcinitcmd=esbc_validate 0x580c80000;"	\
> +	"esbc_validate 0x580cc0000;"		\
> +	"fsl_mc start mc 0x580300000"		\
> +	" 0x580800000 \0"			\
> +	BOOTENV
> +#endif
> +
>
>  #undef CONFIG_BOOTARGS
>  #define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
>

I would prefer positive logic, #ifdef instead of #ifndef.

York


More information about the U-Boot mailing list