[U-Boot] [PATCH] armv8: fsl-layerscape: Fix SECURE_BOOT config

[York Sun]

Without a prompt in Kconfig, SECURE_BOOT cannot be selected by
defconfig. The option was dropped unintentionally when defconfig
files were cleaned up. Three targets were impacted
ls1043ardb_SECURE_BOOT, ls2080ardb_SECURE_BOOT,
ls2080aqds_SECURE_BOOT.

Signed-off-by: York Sun <york.sun at nxp.com>

---

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +-
 configs/ls1043ardb_SECURE_BOOT_defconfig  | 1 +
 configs/ls2080aqds_SECURE_BOOT_defconfig  | 1 +
 configs/ls2080ardb_SECURE_BOOT_defconfig  | 1 +
 4 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index cc0dc88..b78db03 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -93,7 +93,7 @@ config NUM_DDR_CONTROLLERS
 	default 1
 
 config SECURE_BOOT
-	bool
+	bool "Secure Boot"
 	help
 		Enable Freescale Secure Boot feature
 
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index ae2efeb..3f2e0db 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043ARDB=y
+CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_DDR4=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_FIT=y
diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig
index 1ed6e05..358457e 100644
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SECURE_BOOT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig
index 848abbc..1f13f6c 100644
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
+CONFIG_SECURE_BOOT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
-- 
2.7.4