[U-Boot] [PATCH 09/12] aspeed/ast2500: Common board init functions for ast2500 based boards
Maxim Sloyko
maxims at google.com
Wed Jan 4 20:46:53 CET 2017
Signed-off-by: Maxim Sloyko <maxims at google.com>
---
arch/arm/mach-aspeed/Makefile | 2 +-
arch/arm/mach-aspeed/ast2500-board.c | 74 ++++++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-aspeed/ast2500-board.c
diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile
index 1f7af71b03..9d29ff7f6f 100644
--- a/arch/arm/mach-aspeed/Makefile
+++ b/arch/arm/mach-aspeed/Makefile
@@ -5,4 +5,4 @@
#
obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
-obj-$(CONFIG_ASPEED_AST2500) += ast2500/
+obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o
diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c
new file mode 100644
index 0000000000..5b2b0ce132
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -0,0 +1,74 @@
+#include <common.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/wdt.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/uclass.h>
+#include <linux/err.h>
+#include <ram.h>
+#include <timer.h>
+
+/* Second Watchdog Timer by default is configured
+ * to trigger secondary boot source.
+ */
+#define AST_2ND_BOOT_WDT (1)
+
+/* Third Watchdog Timer by default is configured
+ * to toggle Flash address mode switch before reset.
+ */
+#define AST_FLASH_ADDR_DETECT_WDT (2)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void lowlevel_init(void)
+{
+ /*
+ * These two watchdogs need to be stopped as soon as possible,
+ * otherwise the board might hang. By default they are set to
+ * a very short timeout and even simple debug write to serial
+ * console early in the init process might cause them to fire.
+ */
+ struct ast_wdt *flash_addr_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_FLASH_ADDR_DETECT_WDT);
+
+ clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
+
+#ifndef CONFIG_FIRMWARE_2ND_BOOT
+ struct ast_wdt *sec_boot_wdt =
+ (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) *
+ AST_2ND_BOOT_WDT);
+
+ clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
+#endif
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM FAIL1\r\n");
+ return ret;
+ }
+
+ struct ram_info ram;
+ ret = ram_get_info(dev, &ram);
+ if (ret) {
+ debug("DRAM FAIL2\r\n");
+ return ret;
+ }
+
+
+ gd->ram_size = ram.size;
+ return 0;
+}
+
--
2.11.0.390.gc69c2f50cf-goog
More information about the U-Boot
mailing list