[U-Boot] [PATCH 1/4] mmc: fsl_esdhc: make GPIO support optional

york sun york.sun at nxp.com
Wed Jan 4 20:52:12 CET 2017


On 12/06/2016 08:08 PM, Yangbo Lu wrote:
> There would be compiling error as below when enable driver model for esdhc.
> undefined reference to `dm_gpio_get_value'
> undefined reference to `gpio_request_by_name_nodev'
> This patch is to make GPIO support optional with CONFIG_DM_GPIO. Because
> all boards of QorIQ platform don't need it and they just check register for
> CD/WP status, only some boards of i.MX platform require this.
>
> Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
> ---
>  drivers/mmc/fsl_esdhc.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 9796d39..da3a151 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -104,8 +104,10 @@ struct fsl_esdhc_priv {
>  	struct udevice *dev;
>  	int non_removable;
>  	int wp_enable;
> +#ifdef CONFIG_DM_GPIO
>  	struct gpio_desc cd_gpio;
>  	struct gpio_desc wp_gpio;
> +#endif
>  };
>
>  /* Return the XFERTYP flags for a given command and data packet */
> @@ -687,10 +689,11 @@ static int esdhc_getcd(struct mmc *mmc)
>  #ifdef CONFIG_DM_MMC
>  	if (priv->non_removable)
>  		return 1;
> -
> +#ifdef CONFIG_DM_GPIO
>  	if (dm_gpio_is_valid(&priv->cd_gpio))
>  		return dm_gpio_get_value(&priv->cd_gpio);
>  #endif
> +#endif
>
>  	while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
>  		udelay(1000);
> @@ -967,17 +970,20 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  		priv->non_removable = 1;
>  	 } else {
>  		priv->non_removable = 0;
> +#ifdef CONFIG_DM_GPIO
>  		gpio_request_by_name_nodev(fdt, node, "cd-gpios", 0,
>  					   &priv->cd_gpio, GPIOD_IS_IN);
> +#endif
>  	}
>
>  	priv->wp_enable = 1;
>
> +#ifdef CONFIG_DM_GPIO
>  	ret = gpio_request_by_name_nodev(fdt, node, "wp-gpios", 0,
>  					 &priv->wp_gpio, GPIOD_IS_IN);
>  	if (ret)
>  		priv->wp_enable = 0;
> -
> +#endif
>  	/*
>  	 * TODO:
>  	 * Because lack of clk driver, if SDHC clk is not enabled,
>

Jaehoon,

This set looks OK to me. Please review and comment. I can merge it with 
your ack.

Yangbo,

For MMC or SD patches, please CC Jaehoon.

York


More information about the U-Boot mailing list