[U-Boot] [PATCH 6/7] board: samsung: universal_210: use the driver model for max8998
Jaehoon Chung
jh80.chung at samsung.com
Thu Jan 5 09:16:56 CET 2017
Revmoe the "ifndef CONFIG_DM_I2C".
Intead, use the driver model for max8998.
Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
---
board/samsung/universal_c210/universal.c | 169 +++++++++++++++++--------------
1 file changed, 94 insertions(+), 75 deletions(-)
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index c3946ee..0645843 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -27,33 +27,21 @@
DECLARE_GLOBAL_DATA_PTR;
unsigned int board_rev;
+static int init_pmic_lcd(void);
u32 get_board_rev(void)
{
return board_rev;
}
-static int get_hwrev(void)
+int exynos_power_init(void)
{
- return board_rev & 0xFF;
+ return init_pmic_lcd();
}
-int exynos_power_init(void)
+static int get_hwrev(void)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- int ret;
-
- /*
- * For PMIC the I2C bus is named as I2C5, but it is connected
- * to logical I2C adapter 0
- */
- ret = pmic_init(I2C_0);
- if (ret)
- return ret;
-
- init_pmic_lcd();
-#endif
- return 0;
+ return board_rev & 0xFF;
}
static unsigned short get_adc_value(int channel)
@@ -83,23 +71,29 @@ static unsigned short get_adc_value(int channel)
static int adc_power_control(int on)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
+ struct udevice *dev;
int ret;
- struct pmic *p = pmic_get("MAX8998_PMIC");
- if (!p)
- return -ENODEV;
+ u8 reg;
- if (pmic_probe(p))
- return -1;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
+ return ret;
+ }
- ret = pmic_set_output(p,
- MAX8998_REG_ONOFF1,
- MAX8998_LDO4, !!on);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ if (on)
+ reg |= MAX8998_LDO4;
+ else
+ reg &= ~MAX8998_LDO4;
+
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
+ return -EINVAL;
+ }
- return ret;
-#else
return 0;
-#endif
}
static unsigned int get_hw_revision(void)
@@ -147,39 +141,50 @@ static void check_hw_revision(void)
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- int ret = 0;
- struct pmic *p = pmic_get("MAX8998_PMIC");
- if (!p)
- return -ENODEV;
+ struct udevice *dev;
+ int ret;
+ u8 reg;
- if (pmic_probe(p))
- return -1;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
+ return ret;
+ }
if (on) {
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_ON);
+ reg = pmic_reg_read(dev, MAX8998_REG_BUCK_ACTIVE_DISCHARGE3);
+ reg |= MAX8998_SAFEOUT1;
+ ret |= pmic_reg_write(dev,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg |= MAX8998_LDO3;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg |= MAX8998_LDO8;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
} else {
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_OFF);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_OFF);
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_OFF);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg &= ~MAX8998_LDO8;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg &= ~MAX8998_LDO3;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_BUCK_ACTIVE_DISCHARGE3);
+ reg &= ~MAX8998_SAFEOUT1;
+ ret |= pmic_reg_write(dev,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, reg);
}
if (ret) {
puts("MAX8998 LDO setting error!\n");
- return -1;
+ return -EINVAL;
}
-#endif
+
return 0;
}
@@ -205,27 +210,25 @@ int exynos_early_init_f(void)
return 0;
}
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
-static void init_pmic_lcd(void)
+static int init_pmic_lcd(void)
{
+ struct udevice *dev;
unsigned char val;
int ret = 0;
- struct pmic *p = pmic_get("MAX8998_PMIC");
-
- if (!p)
- return;
-
- if (pmic_probe(p))
- return;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998 for init_pmic_lcd()!\n");
+ return ret;
+ }
/* LDO7 1.8V */
val = 0x02; /* (1800 - 1600) / 100; */
- ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_LDO7, val);
/* LDO17 3.0V */
val = 0xe; /* (3000 - 1600) / 100; */
- ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_LDO17, val);
/* Disable unneeded regulators */
/*
@@ -234,26 +237,29 @@ static void init_pmic_lcd(void)
* LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON
*/
val = 0xB9;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, val);
/* ONOFF2
* LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON,
* LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF
*/
val = 0x50;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, val);
/* ONOFF3
* LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF
* EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF
*/
val = 0x00;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF3, val);
- if (ret)
+ if (ret) {
puts("LCD pmic initialisation error!\n");
+ return -EINVAL;
+ }
+
+ return 0;
}
-#endif
void exynos_cfg_lcd_gpio(void)
{
@@ -310,18 +316,31 @@ void exynos_reset_lcd(void)
void exynos_lcd_power_on(void)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- struct pmic *p = pmic_get("MAX8998_PMIC");
+ struct udevice *dev;
+ int ret;
+ u8 reg;
- if (!p)
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
return;
+ }
- if (pmic_probe(p))
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF3);
+ reg |= MAX8998_LDO17;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF3, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
return;
+ }
- pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
- pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
-#endif
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg |= MAX8998_LDO7;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
+ return;
+ }
}
void exynos_cfg_ldo(void)
--
2.10.2
More information about the U-Boot
mailing list