[U-Boot] [PATCH] arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC

[york sun]

On 01/05/2017 01:51 AM, Igor Grinberg wrote:
> On 01/04/17 23:41, york sun wrote:
>> On 12/25/2016 11:29 PM, Igor Grinberg wrote:
>>> Hi Prabhakar Kushwaha,
>>>
>>> On 12/26/16 08:45, Prabhakar Kushwaha wrote:
>>>> Enable UUID and GPT partition support for NXP's ARM based SoCs
>>>> i.e. LS1012A, LS1021A, LS1043A, LS1046A and LS2080A.
>>>>
>>>> Also enable DOS partition for LS1012AFRDM boards.
>>>>
>>>> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
>>>> ---
>>>>  include/configs/ls1012afrdm.h | 5 +++++
>>>>  include/configs/ls1012aqds.h  | 4 ++++
>>>>  include/configs/ls1012ardb.h  | 4 ++++
>>>>  include/configs/ls1021aiot.h  | 3 +++
>>>>  include/configs/ls1021aqds.h  | 3 +++
>>>>  include/configs/ls1021atwr.h  | 3 +++
>>>>  include/configs/ls1043aqds.h  | 4 ++++
>>>>  include/configs/ls1043ardb.h  | 4 ++++
>>>>  include/configs/ls1046aqds.h  | 4 ++++
>>>>  include/configs/ls1046ardb.h  | 4 ++++
>>>>  include/configs/ls2080aqds.h  | 3 +++
>>>>  include/configs/ls2080ardb.h  | 3 +++
>>>
>>> I'm not sure this is the expected way today...
>>>
>>>>  12 files changed, 44 insertions(+)
>>>>
>>>> diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
>>>> index f6f88e8..94f7460 100644
>>>> --- a/include/configs/ls1012afrdm.h
>>>> +++ b/include/configs/ls1012afrdm.h
>>>> @@ -42,6 +42,11 @@
>>>>  #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
>>>>  #endif
>>>>
>>>> +#define CONFIG_DOS_PARTITION
>>>> +#define CONFIG_PARTITION_UUIDS
>>>> +#define CONFIG_EFI_PARTITION
>>>> +#define CONFIG_CMD_GPT
>>>> +
>>>
>>> These are the common (not board specific) things and I think today we expect
>>> it to come through the Kconfig instead of the old config files.
>>
>> Igor,
>>
>> They are not totally common. The board has to support the device. I
>> would recommend to use Kconfig as well if such config is in Kconfig.
>> However it is not the case here.
>
> Right. They are not in Kconfig yet...
> We are making efforts to move stuff to Kconfig.
> Care to land a hand and move these ones to Kconfig?
>

Can't promise. I have been doing just that for powerpc. Still have many 
left.

York