[U-Boot] [PATCH 00/24] Lift mpc85xx config options to Kconfig

[york sun]

On 01/05/2017 05:28 AM, Tom Rini wrote:
> On Wed, Dec 28, 2016 at 08:43:26AM -0800, York Sun wrote:
>
>> In this set, more mpc85xx config options are moved into Kconfig, including
>> some shared configuration for DDR, crypto, mmc, etc.
>>
>> York Sun (24):
>>   powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC to Kconfig
>>   powerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS to Kconfig
>>   powerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB to Kconfig
>>   crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig
>>   crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig
>>   powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014
>>   powerpc: T1023RDB: Remove macro CONFIG_T1023RDB
>>   powerpc: T1024RDB: Remove macro CONFIG_T1024RDB
>>   powerpc: T1040QDS: Remove macro CONFIG_T1040QDS
>>   powerpc: T2080QDS: Remove macro T2080QDS
>>   powerpc: T2080RDB: Remove macro CONFIG_T2080RDB
>>   powerpc: T2081QDS: Remove macro T2081QDS
>>   powerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS
>>   fsl_ddr: Move DDR config options to driver Kconfig
>>   arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
>>   mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* to Kconfig
>>   powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig
>>   ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS to Kconfig
>>   ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and
>>     CONFIG_SYS_NUM_DDR_CTRLS
>>   ddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig
>>   powerpc: mpc85xx: Remove unused ifdef in config header
>>   powerpc: E6500: Move macro CONFIG_E6500 to Kconfig
>>   powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to Kconfig
>>   powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to Kconfig
>
> There were a few minor problems in this series which I fixed up.  The
> only remaining "issue" here is that sbc8641d has a ~3KiB size increase.
> This is due to the issue that previously it did _not_ define
> CONFIG_SYS_FSL_DDR2 but only CONFIG_SYS_FSL_DDR_86XX and that was a
> valid build.  Now that CONFIG_SYS_FSL_DDR2 is set too, other files are
> being included and linked.
>

Thanks, Tom. I will look into SBC8641.

York