[U-Boot] [PATCH 0/9] imx6ul: Add Engicam Is.IoT MX6UL support

Jagan Teki jagan at openedev.com
Sat Jan 7 21:54:19 CET 2017


From: Jagan Teki <jagan at amarulasolutions.com>

This patch set support Engicam Is.IoT MX6UL board support.

Jagan Teki (9):
  configs: imx6: Don't define USDHC2_BASE_ADDR
  arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support
  arm: dts: imx6ul-isiot: Add I2C nodes
  imx6: isiotmx6ul: Add I2C support
  arm: dts: imx6ul-isiot: Add FEC node
  imx6: isiotmx6ul: Add FEC support
  imx6: isiotmx6ul: Add NAND support
  imx6: isiotmx6ul: Add nandboot env support
  imx6ul: isiotmx6ul: Enable I2C support

 arch/arm/cpu/armv7/mx6/Kconfig        |  12 ++
 arch/arm/dts/Makefile                 |   3 +-
 arch/arm/dts/imx6ul-isiot.dts         | 145 ++++++++++++++++
 board/engicam/isiotmx6ul/Kconfig      |  12 ++
 board/engicam/isiotmx6ul/MAINTAINERS  |   7 +
 board/engicam/isiotmx6ul/Makefile     |   6 +
 board/engicam/isiotmx6ul/README       |  28 +++
 board/engicam/isiotmx6ul/isiotmx6ul.c | 316 ++++++++++++++++++++++++++++++++++
 configs/imx6ul_isiot_mmc_defconfig    |  41 +++++
 configs/imx6ul_isiot_nand_defconfig   |  42 +++++
 include/configs/imx6qdl_icore.h       |   2 +-
 include/configs/imx6ul_geam.h         |   2 +-
 include/configs/imx6ul_isiot.h        | 205 ++++++++++++++++++++++
 13 files changed, 818 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/imx6ul-isiot.dts
 create mode 100644 board/engicam/isiotmx6ul/Kconfig
 create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS
 create mode 100644 board/engicam/isiotmx6ul/Makefile
 create mode 100644 board/engicam/isiotmx6ul/README
 create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c
 create mode 100644 configs/imx6ul_isiot_mmc_defconfig
 create mode 100644 configs/imx6ul_isiot_nand_defconfig
 create mode 100644 include/configs/imx6ul_isiot.h

-- 
1.9.1



More information about the U-Boot mailing list