[U-Boot] [PATCH v2 2/4] aspeed: Add basic ast2500 specific drivers and configuration

Maxim Sloyko maxims at google.com
Tue Jan 10 02:50:38 CET 2017


Clock Driver

This driver is ast2500 specific and is not compatible with earlier
versions of this chip. The differences are not that big, but they are
in somewhat random places, so making it compatible with ast2400 is not
worth the effort at the moment.

SDRAM MC driver

The driver is very ast2500 specific and is completely incompatible
with previous versions of the chip.

The memory controller is very poorly documented by Aspeed in the
datasheet, with any mention of the whole range of registers missing. The
initialization procedure has been basically taken from Aspeed SDK, where
it is implemented in assembly and rewritten in C, with very limited
understanding of what exacly it is doing.

---

Changes in v2: None
Changes in v1:
- Merge together all patches related to ast2500 specific drivers
- Add Copyright statement to all c/h files
- Use DT include from Linux Kernel, Add U-Boot specific modifications in
  ast2500-u-boot.dtsi


Signed-off-by: Maxim Sloyko <maxims at google.com>
---
 arch/arm/dts/ast2500-u-boot.dtsi                 |  53 +++
 arch/arm/dts/ast2500.dtsi                        | 174 +++++++++
 arch/arm/include/asm/arch-aspeed/scu_ast2500.h   | 113 ++++++
 arch/arm/include/asm/arch-aspeed/sdram_ast2500.h | 138 +++++++
 arch/arm/mach-aspeed/Kconfig                     |   2 +
 arch/arm/mach-aspeed/Makefile                    |   1 +
 arch/arm/mach-aspeed/ast2500/Kconfig             |   6 +
 arch/arm/mach-aspeed/ast2500/Makefile            |   1 +
 arch/arm/mach-aspeed/ast2500/clk_ast2500.c       |  30 ++
 arch/arm/mach-aspeed/ast2500/sdram_ast2500.c     | 443 +++++++++++++++++++++++
 drivers/clk/Makefile                             |   2 +
 drivers/clk/aspeed/Makefile                      |   7 +
 drivers/clk/aspeed/clk_ast2500.c                 | 255 +++++++++++++
 include/dt-bindings/clock/ast2500-scu.h          |  29 ++
 14 files changed, 1254 insertions(+)
 create mode 100644 arch/arm/dts/ast2500-u-boot.dtsi
 create mode 100644 arch/arm/dts/ast2500.dtsi
 create mode 100644 arch/arm/include/asm/arch-aspeed/scu_ast2500.h
 create mode 100644 arch/arm/include/asm/arch-aspeed/sdram_ast2500.h
 create mode 100644 arch/arm/mach-aspeed/ast2500/Kconfig
 create mode 100644 arch/arm/mach-aspeed/ast2500/Makefile
 create mode 100644 arch/arm/mach-aspeed/ast2500/clk_ast2500.c
 create mode 100644 arch/arm/mach-aspeed/ast2500/sdram_ast2500.c
 create mode 100644 drivers/clk/aspeed/Makefile
 create mode 100644 drivers/clk/aspeed/clk_ast2500.c
 create mode 100644 include/dt-bindings/clock/ast2500-scu.h

diff --git a/arch/arm/dts/ast2500-u-boot.dtsi b/arch/arm/dts/ast2500-u-boot.dtsi
new file mode 100644
index 0000000000..c95a7ba835
--- /dev/null
+++ b/arch/arm/dts/ast2500-u-boot.dtsi
@@ -0,0 +1,53 @@
+#include <dt-bindings/clock/ast2500-scu.h>
+
+#include "ast2500.dtsi"
+
+/ {
+	scu: clock-controller at 1e6e2000 {
+		compatible = "aspeed,ast2500-scu";
+		reg = <0x1e6e2000 0x1000>;
+		u-boot,dm-pre-reloc;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	sdrammc: sdrammc at 1e6e0000 {
+		u-boot,dm-pre-reloc;
+		compatible = "aspeed,ast2500-sdrammc";
+		reg = <0x1e6e0000 0x174
+			0x1e6e0200 0x1d4 >;
+		clocks = <&scu PLL_MPLL>;
+	};
+
+	ahb {
+		u-boot,dm-pre-reloc;
+
+		apb {
+			u-boot,dm-pre-reloc;
+
+			timer: timer at 1e782000 {
+				u-boot,dm-pre-reloc;
+			};
+
+			uart1: serial at 1e783000 {
+				clocks = <&scu PCLK_UART1>;
+			};
+
+			uart2: serial at 1e78d000 {
+				clocks = <&scu PCLK_UART2>;
+			};
+
+			uart3: serial at 1e78e000 {
+				clocks = <&scu PCLK_UART3>;
+			};
+
+			uart4: serial at 1e78f000 {
+				clocks = <&scu PCLK_UART4>;
+			};
+
+			uart5: serial at 1e784000 {
+				clocks = <&scu PCLK_UART5>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/ast2500.dtsi b/arch/arm/dts/ast2500.dtsi
new file mode 100644
index 0000000000..97fac69d11
--- /dev/null
+++ b/arch/arm/dts/ast2500.dtsi
@@ -0,0 +1,174 @@
+/*
+ * This device tree is copied from
+ * https://raw.githubusercontent.com/torvalds/linux/02440622/arch/arm/boot/dts/
+ */
+#include "skeleton.dtsi"
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller at 1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_clkin: clk_clkin at 1e6e2070 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-clkin-clock";
+				reg = <0x1e6e2070 0x04>;
+			};
+
+			clk_hpll: clk_hpll at 1e6e2024 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-hpll-clock";
+				reg = <0x1e6e2024 0x4>;
+				clocks = <&clk_clkin>;
+			};
+
+			clk_ahb: clk_ahb at 1e6e2070 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-ahb-clock";
+				reg = <0x1e6e2070 0x4>;
+				clocks = <&clk_hpll>;
+			};
+
+			clk_apb: clk_apb at 1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,g5-apb-clock";
+				reg = <0x1e6e2008 0x4>;
+				clocks = <&clk_hpll>;
+			};
+
+			clk_uart: clk_uart at 1e6e2008 {
+				#clock-cells = <0>;
+				compatible = "aspeed,uart-clock";
+				reg = <0x1e6e202c 0x4>;
+			};
+
+			sram at 1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			timer: timer at 1e782000 {
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				// The moxart_timer driver registers only one
+				// interrupt and assumes it's for timer 1
+				//interrupts = <16 17 18 35 36 37 38 39>;
+				interrupts = <16>;
+				clocks = <&clk_apb>;
+			};
+
+			wdt1: wdt at 1e785000 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785000 0x1c>;
+				interrupts = <27>;
+			};
+
+			wdt2: wdt at 1e785020 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785020 0x1c>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			wdt3: wdt at 1e785040 {
+				compatible = "aspeed,wdt";
+				reg = <0x1e785074 0x1c>;
+				status = "disabled";
+			};
+
+			uart1: serial at 1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial at 1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial at 1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial at 1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial at 1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				current-speed = <38400>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart6: serial at 1e787000 {
+				compatible = "ns16550a";
+				reg = <0x1e787000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
new file mode 100644
index 0000000000..6c6af68f4f
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _ASM_ARCH_SCU_AST2500_H
+#define _ASM_ARCH_SCU_AST2500_H
+
+#define SCU_UNLOCK_VALUE		0x1688a8a8
+
+#define SCU_HWSTRAP_VGAMEM_MASK		3
+#define SCU_HWSTRAP_VGAMEM_SHIFT	2
+#define SCU_HWSTRAP_DDR4		(1 << 24)
+#define SCU_HWSTRAP_CLKIN_25MHZ		(1 << 23)
+
+#define SCU_MPLL_DENUM_SHIFT		0
+#define SCU_MPLL_DENUM_MASK		0x1f
+#define SCU_MPLL_NUM_SHIFT		5
+#define SCU_MPLL_NUM_MASK		0xff
+#define SCU_MPLL_POST_SHIFT		13
+#define SCU_MPLL_POST_MASK		0x3f
+
+#define SCU_HPLL_DENUM_SHIFT		0
+#define SCU_HPLL_DENUM_MASK		0x1f
+#define SCU_HPLL_NUM_SHIFT		5
+#define SCU_HPLL_NUM_MASK		0xff
+#define SCU_HPLL_POST_SHIFT		13
+#define SCU_HPLL_POST_MASK		0x3f
+
+#define SCU_MISC2_UARTCLK_SHIFT		24
+
+#define SCU_MISC_UARTCLK_DIV13		(1 << 12)
+
+#ifndef __ASSEMBLY__
+
+struct ast2500_clk_priv {
+	struct ast2500_scu *scu;
+};
+
+struct ast2500_scu {
+	u32 protection_key;
+	u32 sysreset_ctrl1;
+	u32 clk_sel1;
+	u32 clk_stop_ctrl1;
+	u32 freq_counter_ctrl;
+	u32 freq_counter_cmp;
+	u32 intr_ctrl;
+	u32 d2_pll_param;
+	u32 m_pll_param;
+	u32 h_pll_param;
+	u32 d_pll_param;
+	u32 misc_ctrl1;
+	u32 pci_config[3];
+	u32 sysreset_status;
+	u32 vga_handshake[2];
+	u32 mac_clk_delay;
+	u32 misc_ctrl2;
+	u32 vga_scratch[8];
+	u32 hwstrap;
+	u32 rng_ctrl;
+	u32 rng_data;
+	u32 rev_id;
+	u32 pinmux_ctrl[6];
+	u32 reserved0;
+	u32 extrst_sel;
+	u32 pinmux_ctrl1[4];
+	u32 reserved1[2];
+	u32 mac_clk_delay_100M;
+	u32 mac_clk_delay_10M;
+	u32 wakeup_enable;
+	u32 wakeup_control;
+	u32 reserved2[3];
+	u32 sysreset_ctrl2;
+	u32 clk_sel2;
+	u32 clk_stop_ctrl2;
+	u32 freerun_counter;
+	u32 freerun_counter_ext;
+	u32 clk_duty_meas_ctrl;
+	u32 clk_duty_meas_res;
+	u32 reserved3[4];
+	/* The next registers are not key protected */
+	struct ast2500_cpu2 {
+		u32 ctrl;
+		u32 base_addr[9];
+		u32 cache_ctrl;
+	} cpu2;
+	u32 reserved4;
+	u32 d_pll_ext_param[3];
+	u32 d2_pll_ext_param[3];
+	u32 mh_pll_ext_param;
+	u32 reserved5;
+	u32 chip_id[2];
+	u32 reserved6[2];
+	u32 uart_clk_ctrl;
+	u32 reserved7[7];
+	u32 pcie_config;
+	u32 mmio_decode;
+	u32 reloc_ctrl_decode[2];
+	u32 mailbox_addr;
+	u32 shared_sram_decode[2];
+	u32 bmc_rev_id;
+	u32 reserved8;
+	u32 bmc_device_id;
+	u32 reserved9[13];
+	u32 clk_duty_sel;
+};
+
+int ast_get_clk(struct udevice **devp);
+void *ast_get_scu(void);
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_SCU_AST2500_H */
diff --git a/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h b/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h
new file mode 100644
index 0000000000..a5f8615ae2
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/sdram_ast2500.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _ASM_ARCH_SDRAM_AST2500_H
+#define _ASM_ARCH_SDRAM_AST2500_H
+
+#define SDRAM_UNLOCK_KEY		0xfc600309
+#define SDRAM_VIDEO_UNLOCK_KEY		0x2003000f
+
+#define SDRAM_PCR_CKE_EN		(1 << 0)
+#define SDRAM_PCR_AUTOPWRDN_EN		(1 << 1)
+#define SDRAM_PCR_CKE_DELAY_SHIFT	4
+#define SDRAM_PCR_CKE_DELAY_MASK	7
+#define SDRAM_PCR_RESETN_DIS		(1 << 7)
+#define SDRAM_PCR_ODT_EN		(1 << 8)
+#define SDRAM_PCR_ODT_AUTO_ON		(1 << 10)
+#define SDRAM_PCR_ODT_EXT_EN		(1 << 11)
+#define SDRAM_PCR_TCKE_PW_SHIFT		12
+#define SDRAM_PCR_TCKE_PW_MASK		7
+#define SDRAM_PCR_RGAP_CTRL_EN		(1 << 15)
+#define SDRAM_PCR_MREQI_DIS		(1 << 17)
+
+/* Fixed priority DRAM Requests mask */
+#define SDRAM_REQ_VGA_HW_CURSOR		(1 << 0)
+#define SDRAM_REQ_VGA_TEXT_CG_FONT	(1 << 1)
+#define SDRAM_REQ_VGA_TEXT_ASCII	(1 << 2)
+#define SDRAM_REQ_VGA_CRT		(1 << 3)
+#define SDRAM_REQ_SOC_DC_CURSOR		(1 << 4)
+#define SDRAM_REQ_SOC_DC_OCD		(1 << 5)
+#define SDRAM_REQ_SOC_DC_CRT		(1 << 6)
+#define SDRAM_REQ_VIDEO_HIPRI_WRITE	(1 << 7)
+#define SDRAM_REQ_USB20_EHCI1		(1 << 8)
+#define SDRAM_REQ_USB20_EHCI2		(1 << 9)
+#define SDRAM_REQ_CPU			(1 << 10)
+#define SDRAM_REQ_AHB2			(1 << 11)
+#define SDRAM_REQ_AHB			(1 << 12)
+#define SDRAM_REQ_MAC0			(1 << 13)
+#define SDRAM_REQ_MAC1			(1 << 14)
+#define SDRAM_REQ_PCIE			(1 << 16)
+#define SDRAM_REQ_XDMA			(1 << 17)
+#define SDRAM_REQ_ENCRYPTION		(1 << 18)
+#define SDRAM_REQ_VIDEO_FLAG		(1 << 21)
+#define SDRAM_REQ_VIDEO_LOW_PRI_WRITE	(1 << 28)
+#define SDRAM_REQ_2D_RW			(1 << 29)
+#define SDRAM_REQ_MEMCHECK		(1 << 30)
+
+#define SDRAM_ICR_RESET_ALL		(1 << 31)
+
+#define SDRAM_CONF_CAP_SHIFT		0
+#define SDRAM_CONF_CAP_MASK		3
+#define SDRAM_CONF_DDR4			(1 << 4)
+#define SDRAM_CONF_SCRAMBLE		(1 << 8)
+#define SDRAM_CONF_SCRAMBLE_PAT2	(1 << 9)
+#define SDRAM_CONF_CACHE_EN		(1 << 10)
+#define SDRAM_CONF_CACHE_INIT_EN	(1 << 12)
+#define SDRAM_CONF_DUALX8		(1 << 13)
+#define SDRAM_CONF_CACHE_INIT_DONE	(1 << 19)
+
+#define SDRAM_CONF_CAP_128M		0
+#define SDRAM_CONF_CAP_256M		1
+#define SDRAM_CONF_CAP_512M		2
+#define SDRAM_CONF_CAP_1024M		3
+
+#define SDRAM_MISC_DDR4_TREFRESH	(1 << 3)
+
+#define SDRAM_PHYCTRL0_INIT		(1 << 0)
+#define SDRAM_PHYCTRL0_AUTO_UPDATE	(1 << 1)
+#define SDRAM_PHYCTRL0_NRST		(1 << 2)
+
+#define SDRAM_REFRESH_CYCLES_SHIFT	0
+#define SDRAM_REFRESH_CYCLES_MASK	0xf
+#define SDRAM_REFRESH_ZQCS_EN		(1 << 7)
+#define SDRAM_REFRESH_PERIOD_SHIFT	8
+#define SDRAM_REFRESH_PERIOD_MASK	0xf
+
+#define SDRAM_TEST_LEN_SHIFT		4
+#define SDRAM_TEST_LEN_MASK		0xfffff
+#define SDRAM_TEST_START_ADDR_SHIFT	24
+#define SDRAM_TEST_START_ADDR_MASK	0x3f
+
+#define SDRAM_TEST_EN			(1 << 0)
+#define SDRAM_TEST_MODE_SHIFT		1
+#define SDRAM_TEST_MODE_MASK		3
+#define SDRAM_TEST_MODE_WO		0
+#define SDRAM_TEST_MODE_RB		1
+#define SDRAM_TEST_MODE_RW		2
+#define SDRAM_TEST_GEN_MODE_SHIFT	3
+#define SDRAM_TEST_GEN_MODE_MASK	7
+#define SDRAM_TEST_TWO_MODES		(1 << 6)
+#define SDRAM_TEST_ERRSTOP		(1 << 7)
+#define SDRAM_TEST_DONE			(1 << 12)
+#define SDRAM_TEST_FAIL			(1 << 13)
+
+#define SDRAM_AC_TRFC_SHIFT		0
+#define SDRAM_AC_TRFC_MASK		0xff
+
+#ifndef __ASSEMBLY__
+
+struct ast2500_sdrammc_regs {
+	u32 protection_key;
+	u32 config;
+	u32 gm_protection_key;
+	u32 refresh_timing;
+	u32 ac_timing[3];
+	u32 misc_control;
+	u32 mr46_mode_setting;
+	u32 mr5_mode_setting;
+	u32 mode_setting_control;
+	u32 mr02_mode_setting;
+	u32 mr13_mode_setting;
+	u32 power_control;
+	u32 req_limit_mask;
+	u32 pri_group_setting;
+	u32 max_grant_len[4];
+	u32 intr_ctrl;
+	u32 ecc_range_ctrl;
+	u32 first_ecc_err_addr;
+	u32 last_ecc_err_addr;
+	u32 phy_ctrl[4];
+	u32 ecc_test_ctrl;
+	u32 test_addr;
+	u32 test_fail_dq_bit;
+	u32 test_init_val;
+	u32 phy_debug_ctrl;
+	u32 phy_debug_data;
+	u32 reserved1[30];
+	u32 scu_passwd;
+	u32 reserved2[7];
+	u32 scu_mpll;
+	u32 reserved3[19];
+	u32 scu_hwstrap;
+};
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_ARCH_SDRAM_AST2500_H */
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 837a887cae..4b99a5abbb 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -19,4 +19,6 @@ config WDT_NUM
 	  The number of Watchdot Timers on a SoC.
 	  AST2500 has three WDTsk earlier versions have two or fewer.
 
+source "arch/arm/mach-aspeed/ast2500/Kconfig"
+
 endif
diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/Makefile
index a14b8f751d..1f7af71b03 100644
--- a/arch/arm/mach-aspeed/Makefile
+++ b/arch/arm/mach-aspeed/Makefile
@@ -5,3 +5,4 @@
 #
 
 obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
+obj-$(CONFIG_ASPEED_AST2500) += ast2500/
diff --git a/arch/arm/mach-aspeed/ast2500/Kconfig b/arch/arm/mach-aspeed/ast2500/Kconfig
new file mode 100644
index 0000000000..c0b448f19e
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500/Kconfig
@@ -0,0 +1,6 @@
+if ASPEED_AST2500
+
+config SYS_CPU
+	default "arm1176"
+
+endif
diff --git a/arch/arm/mach-aspeed/ast2500/Makefile b/arch/arm/mach-aspeed/ast2500/Makefile
new file mode 100644
index 0000000000..a35b239ef3
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500/Makefile
@@ -0,0 +1 @@
+obj-y += clk_ast2500.o sdram_ast2500.o
diff --git a/arch/arm/mach-aspeed/ast2500/clk_ast2500.c b/arch/arm/mach-aspeed/ast2500/clk_ast2500.c
new file mode 100644
index 0000000000..079909fa64
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500/clk_ast2500.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/scu_ast2500.h>
+
+int ast_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_GET_DRIVER(aspeed_ast2500_scu), devp);
+}
+
+void *ast_get_scu(void)
+{
+	struct ast2500_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = ast_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->scu;
+}
diff --git a/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c b/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c
new file mode 100644
index 0000000000..da25756e94
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500/sdram_ast2500.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2012-2020  ASPEED Technology Inc.
+ *
+ * Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:		GPL-2.0
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dt-bindings/clock/ast2500-scu.h>
+#include <errno.h>
+#include <ram.h>
+#include <asm/io.h>
+#include <asm/arch/scu_ast2500.h>
+#include <asm/arch/sdram_ast2500.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <regmap.h>
+
+/* These configuration parameters are taken from Aspeed SDK */
+#define DDR4_MR46_MODE		0x08000000
+#define DDR4_MR5_MODE		0x400
+#define DDR4_MR13_MODE		0x101
+#define DDR4_MR02_MODE		0x410
+#define DDR4_TRFC		0x45457188
+
+#define PHY_CFG_SIZE		15
+
+static const u32 ddr4_ac_timing[3] = {0x63604e37, 0xe97afa99, 0x00019000};
+static const struct {
+	u32 index[PHY_CFG_SIZE];
+	u32 value[PHY_CFG_SIZE];
+} ddr4_phy_config = {
+	.index = {0, 1, 3, 4, 5, 56, 57, 58, 59, 60, 61, 62, 36, 49, 50},
+	.value = {
+		0x42492aae, 0x09002000, 0x55e00b0b, 0x20000000, 0x24,
+		0x03002900, 0x0e0000a0, 0x000e001c, 0x35b8c106, 0x08080607,
+		0x9b000900, 0x0e400a00, 0x00100008, 0x3c183c3c, 0x00631e0e,
+	},
+};
+
+#define SDRAM_MAX_SIZE		(1024 * 1024 * 1024)
+#define SDRAM_MIN_SIZE		(128 * 1024 * 1024)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Bandwidth configuration parameters for different SDRAM requests.
+ * These are hardcoded settings taken from Aspeed SDK.
+ */
+static const u32 ddr_max_grant_params[4] = {
+	0x88448844, 0x24422288, 0x22222222, 0x22222222
+};
+
+/*
+ * These registers are not documented by Aspeed at all.
+ * All writes and reads are taken pretty much as is from SDK.
+ */
+struct ast2500_ddr_phy {
+	u32 phy[117];
+};
+
+struct dram_info {
+	struct ram_info info;
+	struct clk ddr_clk;
+	struct ast2500_sdrammc_regs *regs;
+	struct ast2500_scu *scu;
+	struct ast2500_ddr_phy *phy;
+	ulong clock_rate;
+};
+
+static int ast2500_sdrammc_reset(void)
+{
+	struct ast_wdt *wdt = ast_get_wdt(0);
+	if (IS_ERR(wdt))
+		return PTR_ERR(wdt);
+
+	/* Only Reset SDRAM */
+	writel(WDT_RESET_SDRAM, &wdt->reset_mask);
+	clrbits_le32(&wdt->ctrl,
+		     WDT_CTRL_RESET_MASK << WDT_CTRL_RESET_MODE_SHIFT);
+	wdt_start(wdt, 1);
+
+	/* Wait for WDT to reset */
+	while (readl(&wdt->ctrl) & WDT_CTRL_EN)
+		;
+	wdt_stop(wdt);
+
+	return 0;
+}
+
+static int ast2500_sdrammc_init_phy(struct ast2500_ddr_phy *phy)
+{
+	writel(0, &phy->phy[2]);
+	writel(0, &phy->phy[6]);
+	writel(0, &phy->phy[8]);
+	writel(0, &phy->phy[10]);
+	writel(0, &phy->phy[12]);
+	writel(0, &phy->phy[42]);
+	writel(0, &phy->phy[44]);
+
+	writel(0x86000000, &phy->phy[16]);
+	writel(0x00008600, &phy->phy[17]);
+	writel(0x80000000, &phy->phy[18]);
+	writel(0x80808080, &phy->phy[19]);
+
+	return 0;
+}
+
+static void ast2500_ddr_phy_init_process(struct dram_info *info)
+{
+	struct ast2500_sdrammc_regs *regs = info->regs;
+	writel(0, &regs->phy_ctrl[0]);
+	writel(0x4040, &info->phy->phy[51]);
+
+	writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, &regs->phy_ctrl[0]);
+	while ((readl(&regs->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT))
+		;
+	writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_AUTO_UPDATE,
+	       &regs->phy_ctrl[0]);
+}
+
+static void ast2500_sdrammc_set_vref(struct dram_info *info, u32 vref)
+{
+	writel(0, &info->regs->phy_ctrl[0]);
+	writel((vref << 8) | 0x6, &info->phy->phy[48]);
+	ast2500_ddr_phy_init_process(info);
+}
+
+static int ast2500_ddr_cbr_test(struct dram_info *info)
+{
+	struct ast2500_sdrammc_regs *regs = info->regs;
+	int i;
+	const u32 test_params = SDRAM_TEST_EN
+			| SDRAM_TEST_ERRSTOP
+			| SDRAM_TEST_TWO_MODES;
+	int ret = 0;
+
+	writel((1 << SDRAM_REFRESH_CYCLES_SHIFT) |
+	       (0x5c << SDRAM_REFRESH_PERIOD_SHIFT), &regs->refresh_timing);
+	writel((0xfff << SDRAM_TEST_LEN_SHIFT), &regs->test_addr);
+	writel(0xff00ff00, &regs->test_init_val);
+	writel(SDRAM_TEST_EN | (SDRAM_TEST_MODE_RW << SDRAM_TEST_MODE_SHIFT) |
+	       SDRAM_TEST_ERRSTOP, &regs->ecc_test_ctrl);
+
+	while (!(readl(&regs->ecc_test_ctrl) & SDRAM_TEST_DONE))
+		;
+
+	if (readl(&regs->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
+		ret = -EIO;
+	} else {
+		for (i = 0; i <= SDRAM_TEST_GEN_MODE_MASK; ++i) {
+			writel((i << SDRAM_TEST_GEN_MODE_SHIFT) | test_params,
+			       &regs->ecc_test_ctrl);
+			while (!(readl(&regs->ecc_test_ctrl) & SDRAM_TEST_DONE))
+				;
+			if (readl(&regs->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
+				ret = -EIO;
+				break;
+			}
+		}
+	}
+
+	writel(0, &regs->refresh_timing);
+	writel(0, &regs->ecc_test_ctrl);
+	return ret;
+}
+
+static int ast2500_sdrammc_ddr4_calibrate_vref(struct dram_info *info)
+{
+	int i;
+	int vref_min = 0xff;
+	int vref_max = 0;
+	int range_size = 0;
+
+	for (i = 1; i < 0x40; ++i) {
+		ast2500_sdrammc_set_vref(info, i);
+
+		int res = ast2500_ddr_cbr_test(info);
+		if (res < 0) {
+			if (range_size > 0)
+				break;
+		} else {
+			++range_size;
+			vref_min = min(vref_min, i);
+			vref_max = max(vref_max, i);
+		}
+	}
+
+	/* Pick average setting */
+	ast2500_sdrammc_set_vref(info, (vref_min + vref_max + 1) / 2);
+
+	return 0;
+}
+
+static size_t ast2500_sdrammc_get_vga_mem_size(struct dram_info *info)
+{
+	size_t vga_mem_size_base = 8 * 1024 * 1024;
+	u32 vga_hwconf = (readl(&info->scu->hwstrap)
+			  >> SCU_HWSTRAP_VGAMEM_SHIFT)
+			& SCU_HWSTRAP_VGAMEM_MASK;
+
+	return vga_mem_size_base << vga_hwconf;
+}
+
+/*
+ * Find out RAM size and save it in dram_info
+ *
+ * The procedure is taken from Aspeed SDK
+ */
+static void ast2500_sdrammc_calc_size(struct dram_info *info)
+{
+	/* The controller supports 128/256/512/1024 MB ram */
+	size_t ram_size = SDRAM_MIN_SIZE;
+	const int write_test_offset = 0x100000;
+	u32 test_pattern = 0xdeadbeef;
+	u32 cap_param = SDRAM_CONF_CAP_1024M;
+	u32 refresh_timing_param = DDR4_TRFC;
+	const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
+
+	for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
+	     ram_size >>= 1) {
+		writel(test_pattern, write_addr_base + (ram_size >> 1));
+		test_pattern = (test_pattern >> 4) | (test_pattern << 28);
+	}
+
+	/* One last write to overwrite all wrapped values */
+	writel(test_pattern, write_addr_base);
+
+	/* Reset the pattern and see which value was really written */
+	test_pattern = 0xdeadbeef;
+	for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
+	     ram_size >>= 1) {
+		if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
+			break;
+
+		--cap_param;
+		refresh_timing_param >>= 8;
+		test_pattern = (test_pattern >> 4) | (test_pattern << 28);
+	}
+
+	clrsetbits_le32(&info->regs->ac_timing[1],
+			(SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
+			((refresh_timing_param & SDRAM_AC_TRFC_MASK)
+			 << SDRAM_AC_TRFC_SHIFT));
+
+	info->info.base = CONFIG_SYS_SDRAM_BASE;
+	info->info.size = ram_size - ast2500_sdrammc_get_vga_mem_size(info);
+	clrsetbits_le32(&info->regs->config,
+			(SDRAM_CONF_CAP_MASK << SDRAM_CONF_CAP_SHIFT),
+			((cap_param & SDRAM_CONF_CAP_MASK)
+			 << SDRAM_CONF_CAP_SHIFT));
+}
+
+static int ast2500_sdrammc_init_ddr4(struct dram_info *info)
+{
+	int i;
+	const u32 power_control = SDRAM_PCR_CKE_EN
+	    | (1 << SDRAM_PCR_CKE_DELAY_SHIFT)
+	    | (2 << SDRAM_PCR_TCKE_PW_SHIFT)
+	    | SDRAM_PCR_RESETN_DIS
+	    | SDRAM_PCR_RGAP_CTRL_EN | SDRAM_PCR_ODT_EN | SDRAM_PCR_ODT_EXT_EN;
+	const u32 conf = (SDRAM_CONF_CAP_1024M << SDRAM_CONF_CAP_SHIFT)
+#ifdef CONFIG_DUALX8_RAM
+	    | SDRAM_CONF_DUALX8
+#endif
+	    | SDRAM_CONF_SCRAMBLE | SDRAM_CONF_SCRAMBLE_PAT2 | SDRAM_CONF_DDR4;
+
+	writel(conf, &info->regs->config);
+	for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
+		writel(ddr4_ac_timing[i], &info->regs->ac_timing[i]);
+
+	writel(DDR4_MR46_MODE, &info->regs->mr46_mode_setting);
+	writel(DDR4_MR5_MODE, &info->regs->mr5_mode_setting);
+	writel(DDR4_MR02_MODE, &info->regs->mr02_mode_setting);
+	writel(DDR4_MR13_MODE, &info->regs->mr13_mode_setting);
+
+	for (i = 0; i < PHY_CFG_SIZE; ++i) {
+		writel(ddr4_phy_config.value[i],
+		       &info->phy->phy[ddr4_phy_config.index[i]]);
+	}
+
+	writel(power_control, &info->regs->power_control);
+
+	ast2500_ddr_phy_init_process(info);
+
+	int ret = ast2500_sdrammc_ddr4_calibrate_vref(info);
+	if (ret < 0) {
+		debug("Vref calibration failed!\n");
+		return ret;
+	}
+
+	writel((1 << SDRAM_REFRESH_CYCLES_SHIFT)
+	       | SDRAM_REFRESH_ZQCS_EN | (0x2f << SDRAM_REFRESH_PERIOD_SHIFT),
+	       &info->regs->refresh_timing);
+
+	setbits_le32(&info->regs->power_control,
+		     SDRAM_PCR_AUTOPWRDN_EN | SDRAM_PCR_ODT_AUTO_ON);
+
+	ast2500_sdrammc_calc_size(info);
+
+	setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_INIT_EN);
+	while (!(readl(&info->regs->config) & SDRAM_CONF_CACHE_INIT_DONE))
+		;
+	setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_EN);
+
+	writel(SDRAM_MISC_DDR4_TREFRESH, &info->regs->misc_control);
+
+	/* Enable all requests except video & display */
+	writel(SDRAM_REQ_USB20_EHCI1
+	       | SDRAM_REQ_USB20_EHCI2
+	       | SDRAM_REQ_CPU
+	       | SDRAM_REQ_AHB2
+	       | SDRAM_REQ_AHB
+	       | SDRAM_REQ_MAC0
+	       | SDRAM_REQ_MAC1
+	       | SDRAM_REQ_PCIE
+	       | SDRAM_REQ_XDMA
+	       | SDRAM_REQ_ENCRYPTION
+	       | SDRAM_REQ_VIDEO_FLAG
+	       | SDRAM_REQ_VIDEO_LOW_PRI_WRITE
+	       | SDRAM_REQ_2D_RW
+	       | SDRAM_REQ_MEMCHECK, &info->regs->req_limit_mask);
+
+	return 0;
+}
+
+static void ast2500_sdrammc_unlock(struct dram_info *info)
+{
+	writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
+	while (!readl(&info->regs->protection_key))
+		;
+}
+
+static void ast2500_sdrammc_lock(struct dram_info *info)
+{
+	writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
+	while (readl(&info->regs->protection_key))
+		;
+}
+
+static int ast2500_sdrammc_probe(struct udevice *dev)
+{
+	struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
+	struct ast2500_sdrammc_regs *regs = priv->regs;
+	int ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
+	int i;
+
+	if (ret) {
+		debug("DDR:No CLK\n");
+		return ret;
+	}
+
+	priv->scu = ast_get_scu();
+	if (IS_ERR(priv->scu))
+		return PTR_ERR(priv->scu);
+
+	clk_set_rate(&priv->ddr_clk, priv->clock_rate);
+	ret = ast2500_sdrammc_reset();
+	if (ret)
+		return ret;
+
+	ast2500_sdrammc_unlock(priv);
+
+	writel(SDRAM_PCR_MREQI_DIS | SDRAM_PCR_RESETN_DIS,
+	       &regs->power_control);
+	writel(SDRAM_VIDEO_UNLOCK_KEY, &regs->gm_protection_key);
+
+	/* Mask all requests except CPU and AHB during PHY init */
+	writel(~(SDRAM_REQ_CPU | SDRAM_REQ_AHB), &regs->req_limit_mask);
+
+	for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
+		writel(ddr_max_grant_params[i], &regs->max_grant_len[i]);
+
+	setbits_le32(&regs->intr_ctrl, SDRAM_ICR_RESET_ALL);
+
+	ast2500_sdrammc_init_phy(priv->phy);
+	if (readl(&priv->scu->hwstrap) & SCU_HWSTRAP_DDR4) {
+		ast2500_sdrammc_init_ddr4(priv);
+	} else {
+		debug("Unsupported DRAM3\n");
+		return -EINVAL;
+	}
+
+	clrbits_le32(&regs->intr_ctrl, SDRAM_ICR_RESET_ALL);
+	ast2500_sdrammc_lock(priv);
+
+	return 0;
+}
+
+static int ast2500_sdrammc_ofdata_to_platdata(struct udevice *dev)
+{
+	struct dram_info *priv = dev_get_priv(dev);
+	struct regmap *map;
+	int ret = regmap_init_mem(dev, &map);
+
+	if (ret)
+		return ret;
+
+	priv->regs = regmap_get_range(map, 0);
+	priv->phy = regmap_get_range(map, 1);
+
+	priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+					  "clock-frequency", 0);
+
+	if (!priv->clock_rate) {
+		debug("DDR Clock Rate not defined\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ast2500_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
+{
+	struct dram_info *priv = dev_get_priv(dev);
+
+	*info = priv->info;
+
+	return 0;
+}
+
+static struct ram_ops ast2500_sdrammc_ops = {
+	.get_info = ast2500_sdrammc_get_info,
+};
+
+static const struct udevice_id ast2500_sdrammc_ids[] = {
+	{ .compatible = "aspeed,ast2500-sdrammc" },
+	{ }
+};
+
+U_BOOT_DRIVER(sdrammc_ast2500) = {
+	.name = "aspeed_ast2500_sdrammc",
+	.id = UCLASS_RAM,
+	.of_match = ast2500_sdrammc_ids,
+	.ops = &ast2500_sdrammc_ops,
+	.ofdata_to_platdata = ast2500_sdrammc_ofdata_to_platdata,
+	.probe = ast2500_sdrammc_probe,
+	.priv_auto_alloc_size = sizeof(struct dram_info),
+};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 40a5e8cae8..625513789c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
 obj-$(CONFIG_CLK_EXYNOS) += exynos/
 obj-$(CONFIG_CLK_AT91) += at91/
 obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
+
+obj-$(CONFIG_ARCH_ASPEED) += aspeed/
diff --git a/drivers/clk/aspeed/Makefile b/drivers/clk/aspeed/Makefile
new file mode 100644
index 0000000000..65d1cd6e29
--- /dev/null
+++ b/drivers/clk/aspeed/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_ASPEED_AST2500) += clk_ast2500.o
diff --git a/drivers/clk/aspeed/clk_ast2500.c b/drivers/clk/aspeed/clk_ast2500.c
new file mode 100644
index 0000000000..c888a6d35b
--- /dev/null
+++ b/drivers/clk/aspeed/clk_ast2500.c
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/arch/scu_ast2500.h>
+#include <asm/io.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <dt-bindings/clock/ast2500-scu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * For H-PLL and M-PLL the formula is
+ * (Output Frequency) = CLKIN * ((M + 1) / (N + 1)) / (P + 1)
+ * M - Numerator
+ * N - Denumerator
+ * P - Post Divider
+ * They have the same layout in their control register.
+ */
+
+/*
+ * Get the rate of the M-PLL clock from input clock frequency and
+ * the value of the M-PLL Parameter Register.
+ */
+static ulong ast2500_get_mpll_rate(ulong clkin, u32 mpll_reg)
+{
+	const ulong num = (mpll_reg >> SCU_MPLL_NUM_SHIFT) & SCU_MPLL_NUM_MASK;
+	const ulong denum = (mpll_reg >> SCU_MPLL_DENUM_SHIFT)
+			& SCU_MPLL_DENUM_MASK;
+	const ulong post_div = (mpll_reg >> SCU_MPLL_POST_SHIFT)
+			& SCU_MPLL_POST_MASK;
+
+	return (clkin * ((num + 1) / (denum + 1))) / post_div;
+}
+
+/*
+ * Get the rate of the H-PLL clock from input clock frequency and
+ * the value of the H-PLL Parameter Register.
+ */
+static ulong ast2500_get_hpll_rate(ulong clkin, u32 hpll_reg)
+{
+	const ulong num = (hpll_reg >> SCU_HPLL_NUM_SHIFT) & SCU_HPLL_NUM_MASK;
+	const ulong denum = (hpll_reg >> SCU_HPLL_DENUM_SHIFT)
+			& SCU_HPLL_DENUM_MASK;
+	const ulong post_div = (hpll_reg >> SCU_HPLL_POST_SHIFT)
+			& SCU_HPLL_POST_MASK;
+
+	return (clkin * ((num + 1) / (denum + 1))) / post_div;
+}
+
+static ulong ast2500_get_clkin(struct ast2500_scu *scu)
+{
+	return readl(&scu->hwstrap) & SCU_HWSTRAP_CLKIN_25MHZ
+			? 25*1000*1000 : 24*1000*1000;
+}
+
+static ulong ast2500_get_uart_clk_rate(struct ast2500_scu *scu, int uart)
+{
+	/*
+	 * ast2500 datasheet is very confusing when it comes to UART clocks,
+	 * especially when CLKIN = 25 MHz. The settings are in
+	 * different registers and it is unclear how they interact.
+	 *
+	 * This has only been tested with default settings and CLKIN = 24 MHz.
+	 */
+	ulong uart_clkin;
+
+	if (readl(&scu->misc_ctrl2) & (1 << (uart + SCU_MISC2_UARTCLK_SHIFT)))
+		uart_clkin = 192 * 1000 * 1000;
+	else
+		uart_clkin = 24 * 1000 * 1000;
+
+	if (readl(&scu->misc_ctrl1) & SCU_MISC_UARTCLK_DIV13)
+		uart_clkin /= 13;
+
+	return uart_clkin;
+}
+
+static ulong ast2500_clk_get_rate(struct clk *clk)
+{
+	struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
+	ulong clkin = ast2500_get_clkin(priv->scu);
+	ulong rate;
+
+	switch (clk->id) {
+	case PLL_HPLL:
+	case ARMCLK:
+		/*
+		 * This ignores dynamic/static slowdown of ARMCLK and may
+		 * be inaccurate.
+		 */
+		rate = ast2500_get_hpll_rate(clkin,
+					     readl(&priv->scu->h_pll_param));
+		break;
+	case MCLK_DDR:
+		rate = ast2500_get_mpll_rate(clkin,
+					     readl(&priv->scu->m_pll_param));
+		break;
+	case PCLK_UART1:
+		rate = ast2500_get_uart_clk_rate(priv->scu, 1);
+		break;
+	case PCLK_UART2:
+		rate = ast2500_get_uart_clk_rate(priv->scu, 2);
+		break;
+	case PCLK_UART3:
+		rate = ast2500_get_uart_clk_rate(priv->scu, 3);
+		break;
+	case PCLK_UART4:
+		rate = ast2500_get_uart_clk_rate(priv->scu, 4);
+		break;
+	case PCLK_UART5:
+		rate = ast2500_get_uart_clk_rate(priv->scu, 5);
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return rate;
+}
+
+static void ast2500_scu_unlock(struct ast2500_scu *scu)
+{
+	writel(SCU_UNLOCK_VALUE, &scu->protection_key);
+	while (!readl(&scu->protection_key))
+		;
+}
+
+static void ast2500_scu_lock(struct ast2500_scu *scu)
+{
+	writel(~SCU_UNLOCK_VALUE, &scu->protection_key);
+	while (readl(&scu->protection_key))
+		;
+}
+
+static ulong ast2500_configure_ddr(struct ast2500_scu *scu, ulong rate)
+{
+	ulong clkin = ast2500_get_clkin(scu);
+	u32 mpll_reg;
+
+	/*
+	 * There are not that many combinations of numerator, denumerator
+	 * and post divider, so just brute force the best combination.
+	 * However, to avoid overflow when multiplying, use kHz.
+	 */
+	const ulong clkin_khz = clkin / 1000;
+	const ulong rate_khz = rate / 1000;
+
+	ulong best_num = 0;
+	ulong best_denum = 0;
+	ulong best_post = 0;
+	ulong delta = rate;
+
+	ulong num, denum, post;
+	for (denum = 0; denum <= SCU_MPLL_DENUM_MASK; ++denum) {
+		for (post = 0; post <= SCU_MPLL_POST_MASK; ++post) {
+			num = (rate_khz * (post + 1) / clkin_khz) * (denum + 1);
+			ulong new_rate_khz = (clkin_khz
+					      * ((num + 1) / (denum + 1)))
+					     / (post + 1);
+
+			/* Keep the rate below requested one. */
+			if (new_rate_khz > rate_khz)
+				continue;
+
+			if (new_rate_khz - rate_khz < delta) {
+				delta = new_rate_khz - rate_khz;
+
+				best_num = num;
+				best_denum = denum;
+				best_post = post;
+
+				if (delta == 0)
+					goto rate_calc_done;
+			}
+		}
+	}
+
+ rate_calc_done:
+
+	mpll_reg = readl(&scu->m_pll_param);
+	mpll_reg &= ~((SCU_MPLL_POST_MASK << SCU_MPLL_POST_SHIFT)
+		      | (SCU_MPLL_NUM_MASK << SCU_MPLL_NUM_SHIFT)
+		      | (SCU_MPLL_DENUM_MASK << SCU_MPLL_DENUM_SHIFT));
+	mpll_reg |= (best_post << SCU_MPLL_POST_SHIFT)
+	    | (best_num << SCU_MPLL_NUM_SHIFT)
+	    | (best_denum << SCU_MPLL_DENUM_SHIFT);
+
+	ast2500_scu_unlock(scu);
+	writel(mpll_reg, &scu->m_pll_param);
+	ast2500_scu_lock(scu);
+
+	return ast2500_get_mpll_rate(clkin, mpll_reg);
+}
+
+static ulong ast2500_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
+
+	ulong new_rate;
+	switch (clk->id) {
+	case PLL_MPLL:
+	case MCLK_DDR:
+		new_rate = ast2500_configure_ddr(priv->scu, rate);
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return new_rate;
+}
+
+struct clk_ops ast2500_clk_ops = {
+	.get_rate = ast2500_clk_get_rate,
+	.set_rate = ast2500_clk_set_rate,
+};
+
+static int ast2500_clk_probe(struct udevice *dev)
+{
+	struct ast2500_clk_priv *priv = dev_get_priv(dev);
+	priv->scu = (struct ast2500_scu *)dev_get_addr(dev);
+
+	return 0;
+}
+
+static int ast2500_clk_bind(struct udevice *dev)
+{
+	int ret;
+
+	/* The reset driver does not have a device node, so bind it here */
+	ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
+	if (ret)
+		debug("Warning: No reset driver: ret=%d\n", ret);
+
+	return 0;
+}
+
+static const struct udevice_id ast2500_clk_ids[] = {
+	{ .compatible = "aspeed,ast2500-scu" },
+	{ }
+};
+
+U_BOOT_DRIVER(aspeed_ast2500_scu) = {
+	.name		= "aspeed_ast2500_scu",
+	.id		= UCLASS_CLK,
+	.of_match	= ast2500_clk_ids,
+	.priv_auto_alloc_size = sizeof(struct ast2500_clk_priv),
+	.ops		= &ast2500_clk_ops,
+	.bind		= ast2500_clk_bind,
+	.probe		= ast2500_clk_probe,
+};
diff --git a/include/dt-bindings/clock/ast2500-scu.h b/include/dt-bindings/clock/ast2500-scu.h
new file mode 100644
index 0000000000..ca58b12943
--- /dev/null
+++ b/include/dt-bindings/clock/ast2500-scu.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Google Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* Core Clocks */
+#define PLL_HPLL	1
+#define PLL_DPLL	2
+#define PLL_D2PLL	3
+#define PLL_MPLL	4
+#define ARMCLK		5
+
+
+/* Bus Clocks, derived from core clocks */
+#define BCLK_PCLK	101
+#define BCLK_LHCLK	102
+#define BCLK_MACCLK	103
+#define BCLK_SDCLK	104
+#define BCLK_ARMCLK	105
+
+#define MCLK_DDR	201
+
+/* Special clocks */
+#define PCLK_UART1	501
+#define PCLK_UART2	502
+#define PCLK_UART3	503
+#define PCLK_UART4	504
+#define PCLK_UART5	505
-- 
2.11.0.390.gc69c2f50cf-goog




More information about the U-Boot mailing list