[U-Boot] [PATCH v4 17/28] arm: socfpga: arria10: update dwmac reset function to support Arria10

[Chee Tien Fong]

From: Tien Fong Chee <tien.fong.chee at intel.com>

On the Arria10, the EMAC phy mode configuration for each EMACs is located
in separate registers versus being in 1 register for the GEN5 devices. The
Arria10 also has 3 EMACs compared to 2 for the GEN5 devices.

Update the dwmac_deassert_reset function to support both GEN5 and Arria10
devices.

Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dinguyen at kernel.org>
Cc: Chin Liang See <chin.liang.see at intel.com>
Cc: Tien Fong <skywindctf at gmail.com>
---
 arch/arm/mach-socfpga/include/mach/system_manager.h |  4 +---
 arch/arm/mach-socfpga/misc.c                        | 14 ++++++++++++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h b/arch/arm/mach-socfpga/include/mach/system_manager.h
index 9ca889a..831ba4a 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -133,9 +133,7 @@ struct socfpga_system_manager {
 	u32  usb0_l3master;
 	u32  usb1_l3master;
 	u32  emac_global;
-	u32  emac0;
-	u32  emac1;
-	u32  emac2;
+	u32  emac[3];
 	u32  _pad_0x50_0x5f[4];
 	u32  fpgaintf_en_global;
 	u32  fpgaintf_en_0;
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index c97caea..510aa1d 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -21,7 +21,11 @@
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #include <dt-bindings/reset/altr,rst-mgr.h>
+#else
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -95,15 +99,25 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 	} else if (of_reset_id == EMAC1_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
 		reset = SOCFPGA_RESET(EMAC1);
+#ifndef CONFIG_TARGET_SOCFPGA_GEN5
+	} else if (of_reset_id == EMAC2_RESET) {
+		reset = SOCFPGA_RESET(EMAC2);
+#endif
 	} else {
 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
 		return;
 	}
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	/* configure to PHY interface select choosed */
 	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
 			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
 			phymode << physhift);
+#else
+	clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET],
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+			phymode);
+#endif
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
-- 
2.2.0