[U-Boot] [PATCH v4 25/28] arm: socfpga: arria10: Added drivers for Arria10 clock manager
Chee Tien Fong
tien.fong.chee at intel.com
Tue Jan 10 06:26:58 CET 2017
From: Tien Fong Chee <tien.fong.chee at intel.com>
The drivers is restructured such common functions, gen5 functions, and
arria10 functions are moved to clock_manager.c, clock_manager_gen5 and
clock_manager_arria10 respectively.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dingnuyen at kernel.org>
Cc: Ching Liang See <chin.liang.see at intel.com>
Cc: Tien Fong <skywindctf at gmail.com>
---
arch/arm/mach-socfpga/clock_manager.c | 752 +++++++---------
arch/arm/mach-socfpga/clock_manager_arria10.c | 954 +++++++++++++++++++++
.../{clock_manager.c => clock_manager_gen5.c} | 240 +-----
arch/arm/mach-socfpga/include/mach/clock_manager.h | 356 ++++++--
4 files changed, 1573 insertions(+), 729 deletions(-)
create mode 100644 arch/arm/mach-socfpga/clock_manager_arria10.c
copy arch/arm/mach-socfpga/{clock_manager.c => clock_manager_gen5.c} (62%)
diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c
index aa71636..d209f7d 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -7,416 +7,287 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock_manager.h>
+#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
+/* Function prototypes */
+/* Common prototypes */
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+static void cm_print_clock_quick_summary(void);
+int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+void cm_wait_for_lock(uint32_t mask);
+void cm_wait_for_fsm(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+
static const struct socfpga_clock_manager *clock_manager_base =
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
-static void cm_wait_for_lock(uint32_t mask)
+/* Common functions */
+int set_cpu_clk_info(void)
{
- register uint32_t inter_val;
- uint32_t retry = 0;
- do {
- inter_val = readl(&clock_manager_base->inter) & mask;
- if (inter_val == mask)
- retry++;
- else
- retry = 0;
- if (retry >= 10)
- break;
- } while (1);
-}
+ /* Calculate the clock frequencies required for drivers */
+ cm_get_l4_sp_clk_hz();
+ cm_get_mmc_controller_clk_hz();
-/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
-{
- while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
- ;
-}
+ gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
+ gd->bd->bi_dsp_freq = 0;
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
- writel(val, &clock_manager_base->bypass);
- cm_wait_for_fsm();
-}
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ gd->bd->bi_ddr_freq = 0;
+#endif
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
- writel(val, &clock_manager_base->ctrl);
- cm_wait_for_fsm();
+ return 0;
}
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
- uint32_t reg_address, uint32_t mask)
+unsigned int cm_get_spi_controller_clk_hz(void)
{
- /* poll until phase is zero */
- while (readl(reg_address) & mask)
- ;
+ uint32_t clock = 0;
- writel(value, reg_address);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t reg;
+ clock = cm_get_per_vco_clk_hz();
- while (readl(reg_address) & mask)
- ;
-}
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+#endif
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
+ return clock;
+}
-void cm_basic_init(const struct cm_config * const cfg)
+unsigned int cm_get_qspi_controller_clk_hz(void)
{
- unsigned long end;
-
- /* Start by being paranoid and gate all sw managed clocks */
-
- /*
- * We need to disable nandclk
- * and then do another apb access before disabling
- * gatting off the rest of the periperal clocks.
- */
- writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
- readl(&clock_manager_base->per_pll.en),
- &clock_manager_base->per_pll.en);
-
- /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
- writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
- CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
- &clock_manager_base->main_pll.en);
-
- writel(0, &clock_manager_base->sdr_pll.en);
-
- /* now we can gate off the rest of the peripheral clocks */
- writel(0, &clock_manager_base->per_pll.en);
-
- /* Put all plls in bypass */
- cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
- CLKMGR_BYPASS_MAINPLL);
-
- /* Put all plls VCO registers back to reset value. */
- writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->main_pll.vco);
- writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->per_pll.vco);
- writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->sdr_pll.vco);
-
- /*
- * The clocks to the flash devices and the L4_MAIN clocks can
- * glitch when coming out of safe mode if their source values
- * are different from their reset value. So the trick it to
- * put them back to their reset state, and change input
- * after exiting safe mode but before ungating the clocks.
- */
- writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
- &clock_manager_base->per_pll.src);
- writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
- &clock_manager_base->main_pll.l4src);
-
- /* read back for the required 5 us delay. */
- readl(&clock_manager_base->main_pll.vco);
- readl(&clock_manager_base->per_pll.vco);
- readl(&clock_manager_base->sdr_pll.vco);
-
-
- /*
- * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
- * with numerator and denominator.
- */
- writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
- writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
- writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
- /*
- * Time starts here. Must wait 7 us from
- * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
- */
- end = timer_get_us() + 7;
-
- /* main mpu */
- writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
- /* main main clock */
- writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
- /* main for dbg */
- writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
- /* main for cfgs2fuser0clk */
- writel(cfg->cfg2fuser0clk,
- &clock_manager_base->main_pll.cfgs2fuser0clk);
-
- /* Peri emac0 50 MHz default to RMII */
- writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
- /* Peri emac1 50 MHz default to RMII */
- writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
- /* Peri QSPI */
- writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
- writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
- /* Peri pernandsdmmcclk */
- writel(cfg->mainnandsdmmcclk,
- &clock_manager_base->main_pll.mainnandsdmmcclk);
-
- writel(cfg->pernandsdmmcclk,
- &clock_manager_base->per_pll.pernandsdmmcclk);
-
- /* Peri perbaseclk */
- writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
- /* Peri s2fuser1clk */
- writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
- /* 7 us must have elapsed before we can enable the VCO */
- while (timer_get_us() < end)
- ;
-
- /* Enable vco */
- /* main pll vco */
- writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->main_pll.vco);
+ uint32_t clock = 0;
- /* periferal pll */
- writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->per_pll.vco);
-
- /* sdram pll vco */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
-
- /* L3 MP and L3 SP */
- writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
- writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
- writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
- /* L4 MP, L4 SP, can0, and can1 */
- writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
- writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
- (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
- CLKMGR_INTER_PERPLLLOCKED_MASK | \
- CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
- cm_wait_for_lock(LOCKED_MASK);
-
- /* write the sdram clock counters before toggling outreset all */
- writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqsclk);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t reg;
+ /* identify the source of QSPI clock */
+ reg = readl(&clock_manager_base->per_pll.src);
+ reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
- writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddr2xdqsclk);
+ if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+ clock = cm_get_f2s_per_ref_clk_hz();
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+ clock = cm_get_main_vco_clk_hz();
- writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqclk);
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->main_pll.mainqspiclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+ clock = cm_get_per_vco_clk_hz();
- writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
- &clock_manager_base->sdr_pll.s2fuser2clk);
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->per_pll.perqspiclk);
+ clock /= (reg + 1);
+ }
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+#endif
- /*
- * after locking, but before taking out of bypass
- * assert/deassert outresetall
- */
- uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
+ return clock;
+}
- /* assert main outresetall */
- writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
+void cm_wait_for_lock(uint32_t mask)
+{
+ register uint32_t inter_val;
+ uint32_t retry = 0;
+ do {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ inter_val = readl(&clock_manager_base->stat) & mask;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ inter_val = readl(&clock_manager_base->inter) & mask;
+#endif
+ /* Wait for stable lock */
+ if (inter_val == mask)
+ retry++;
+ else
+ retry = 0;
+ if (retry >= 10)
+ break;
+ } while (1);
+}
- uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
+unsigned long cm_get_mpu_clk_hz(void)
+{
+ uint32_t reg, clk_hz;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ clk_hz = cm_get_main_vco_clk_hz();
- /* assert pheriph outresetall */
- writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
+ /* get the MPU clock */
+ reg = readl(&clock_manager_base->altera.mpuclk);
+ clk_hz /= (reg + 1);
+ reg = readl(&clock_manager_base->main_pll.mpuclk);
+ clk_hz /= (reg + 1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ uint32_t clk_src, mainmpuclk_reg;
- /* assert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
- CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
- &clock_manager_base->sdr_pll.vco);
+ mainmpuclk_reg = readl(&clock_manager_base->main_pll.mpuclk);
- /* deassert main outresetall */
- writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
+ clk_src = (mainmpuclk_reg >> CLKMGR_MAINPLL_MPUCLK_SRC_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_SRC_MSK;
- /* deassert pheriph outresetall */
- writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
+ reg = readl(&clock_manager_base->altera.mpuclk);
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (clk_src) {
+ case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+ clk_hz = cm_get_main_vco_clk_hz();
+ clk_hz /= ((reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+ + 1);
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+ clk_hz = cm_get_per_vco_clk_hz();
+ clk_hz /= (((reg >> CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ printf("cm_get_mpu_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
- /* deassert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
+ clk_hz /= ((mainmpuclk_reg & CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+#endif
- /*
- * now that we've toggled outreset all, all the clocks
- * are aligned nicely; so we can change any phase.
- */
- cm_write_with_phase(cfg->ddrdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
- CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+ return clk_hz;
+}
- /* SDRAM DDR2XDQSCLK */
- cm_write_with_phase(cfg->ddr2xdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
- CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+unsigned int cm_get_per_vco_clk_hz(void)
+{
+ uint32_t src_hz = 0;
+ uint32_t clk_src = 0;
+ uint32_t numer = 0;
+ uint32_t denom = 0;
+ uint32_t vco = 0;
- cm_write_with_phase(cfg->ddrdqclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
- CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ /* identify PER PLL clock source */
+ clk_src = readl(&clock_manager_base->per_pll.vco);
+ clk_src = (clk_src & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+ if (clk_src == CLKMGR_VCO_SSRC_EOSC1)
+ src_hz = cm_get_osc_clk_hz(1);
+ else if (clk_src == CLKMGR_VCO_SSRC_EOSC2)
+ src_hz = cm_get_osc_clk_hz(2);
+ else if (clk_src == CLKMGR_VCO_SSRC_F2S)
+ src_hz = cm_get_f2s_per_ref_clk_hz();
- cm_write_with_phase(cfg->s2fuser2clk,
- (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
- CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+ /* get the PER VCO clock */
+ vco = readl(&clock_manager_base->per_pll.vco);
+
+ numer = (vco & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET;
+
+ denom = (vco & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET;
+
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ clk_src = readl(&clock_manager_base->per_pll.vco0);
+
+ clk_src = (clk_src >> CLKMGR_PERPLL_VCO0_PSRC_LSB) &
+ CLKMGR_PERPLL_VCO0_PSRC_MSK;
+
+ if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_EOSC) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_F2S) {
+ src_hz = f2s_free_hz;
+ } else if (clk_src == CLKMGR_PERPLL_VCO0_PSRC_MAIN) {
+ src_hz = cm_get_main_vco_clk_hz();
+ src_hz /= (readl
+ (&clock_manager_base->main_pll.cntr15clk) &
+ CLKMGR_MAINPLL_CNTRCLK_MSK) + 1;
+ } else {
+ printf("cm_get_per_vco_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
- /* Take all three PLLs out of bypass when safe mode is cleared. */
- cm_write_bypass(0);
+ vco = readl(&clock_manager_base->per_pll.vco1);
- /* clear safe mode */
- cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
+ numer = vco & CLKMGR_PERPLL_VCO1_NUMER_MSK;
- /*
- * now that safe mode is clear with clocks gated
- * it safe to change the source mux for the flashes the the L4_MAIN
- */
- writel(cfg->persrc, &clock_manager_base->per_pll.src);
- writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
+ denom = (vco >> CLKMGR_PERPLL_VCO1_DENOM_LSB) &
+ CLKMGR_PERPLL_VCO1_DENOM_MSK;
+#endif
- /* Now ungate non-hw-managed clocks */
- writel(~0, &clock_manager_base->main_pll.en);
- writel(~0, &clock_manager_base->per_pll.en);
- writel(~0, &clock_manager_base->sdr_pll.en);
+ vco = src_hz;
+ vco /= (1 + denom);
+ vco *= (1 + numer);
- /* Clear the loss of lock bits (write 1 to clear) */
- writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
- CLKMGR_INTER_MAINPLLLOST_MASK,
- &clock_manager_base->inter);
+ return vco;
}
-static unsigned int cm_get_main_vco_clk_hz(void)
+unsigned int cm_get_main_vco_clk_hz(void)
{
- uint32_t reg, clock;
+ uint32_t src_hz, numer, denom, vco;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
/* get the main VCO clock */
- reg = readl(&clock_manager_base->main_pll.vco);
- clock = cm_get_osc_clk_hz(1);
- clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify PER PLL clock source */
- reg = readl(&clock_manager_base->per_pll.vco);
- reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_per_ref_clk_hz();
-
- /* get the PER VCO clock */
- reg = readl(&clock_manager_base->per_pll.vco);
- clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
+ vco = readl(&clock_manager_base->main_pll.vco);
+
+ numer = ((vco & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET);
+ denom = ((vco & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET);
+
+ src_hz = cm_get_osc_clk_hz(1);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ uint32_t clk_src = readl(&clock_manager_base->main_pll.vco0);
+
+ clk_src = (clk_src >> CLKMGR_MAINPLL_VCO0_PSRC_LSB) &
+ CLKMGR_MAINPLL_VCO0_PSRC_MSK;
+
+ if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_EOSC) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_MAINPLL_VCO0_PSRC_F2S) {
+ src_hz = f2s_free_hz;
+ } else {
+ printf("cm_get_main_vco_clk_hz invalid clk_src %d\n", clk_src);
+ return 0;
+ }
-unsigned long cm_get_mpu_clk_hz(void)
-{
- uint32_t reg, clock;
+ vco = readl(&clock_manager_base->main_pll.vco1);
- clock = cm_get_main_vco_clk_hz();
+ numer = vco & CLKMGR_MAINPLL_VCO1_NUMER_MSK;
- /* get the MPU clock */
- reg = readl(&clock_manager_base->altera.mpuclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mpuclk);
- clock /= (reg + 1);
- return clock;
-}
+ denom = (vco >> CLKMGR_MAINPLL_VCO1_DENOM_LSB) &
+ CLKMGR_MAINPLL_VCO1_DENOM_MSK;
+#endif
-unsigned long cm_get_sdram_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify SDRAM PLL clock source */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_sdr_ref_clk_hz();
-
- /* get the SDRAM VCO clock */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- /* get the SDRAM (DDR_DQS) clock */
- reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
- reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
- CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
- clock /= (reg + 1);
+ vco = src_hz;
+ vco /= (1 + denom);
+ vco *= (1 + numer);
- return clock;
+ return vco;
}
unsigned int cm_get_l4_sp_clk_hz(void)
{
- uint32_t reg, clock = 0;
+ uint32_t clock = 0;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t reg;
/* identify the source of L4 SP clock */
reg = readl(&clock_manager_base->main_pll.l4src);
reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
@@ -443,106 +314,117 @@ unsigned int cm_get_l4_sp_clk_hz(void)
reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
clock = clock / (1 << reg);
-
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ clock = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB);
+#endif
return clock;
}
-unsigned int cm_get_mmc_controller_clk_hz(void)
+/* function to poll in the fsm busy bit */
+void cm_wait_for_fsm(void)
{
- uint32_t reg, clock = 0;
-
- /* identify the source of MMC clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
- CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
- if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
- clock /= (reg + 1);
- }
-
- /* further divide by 4 as we have fixed divider at wrapper */
- clock /= 4;
- return clock;
+ while (readl(&clock_manager_base->stat) &
+ CLKMGR_CLKMGR_STAT_BUSY_SET_MSK);
}
-unsigned int cm_get_qspi_controller_clk_hz(void)
+unsigned int cm_get_mmc_controller_clk_hz(void)
{
- uint32_t reg, clock = 0;
-
- /* identify the source of QSPI clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
- CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+ uint32_t clk_hz = 0;
+ uint32_t clk_input = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ clk_input = readl(&clock_manager_base->per_pll.cntr6clk);
+ clk_input = (clk_input >> CLKMGR_PERPLL_CNTR6CLK_SRC_LSB) &
+ CLKMGR_PERPLLGRP_SRC_MSK;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ clk_input = readl(&clock_manager_base->per_pll.src);
+ clk_input = (clk_input & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+#endif
+
+ switch (clk_input) {
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ case CLKMGR_PERPLLGRP_SRC_MAIN:
+ clk_hz = cm_get_main_vco_clk_hz();
+ clk_hz /= 1 +
+ (readl
+ (&clock_manager_base->main_pll.cntr6clk) &
+ CLKMGR_MAINPLL_CNTRCLK_MSK);
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_PERI:
+ clk_hz = cm_get_per_vco_clk_hz();
+ clk_hz /= 1 + (readl
+ (&clock_manager_base->per_pll.cntr6clk) &
+ CLKMGR_PERPLL_CNTRCLK_MSK);
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+
+ case CLKMGR_PERPLLGRP_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ case CLKMGR_SDMMC_CLK_SRC_F2S:
+ clk_hz = cm_get_f2s_per_ref_clk_hz();
+ break;
+
+ case CLKMGR_SDMMC_CLK_SRC_MAIN:
+ clk_hz = cm_get_main_vco_clk_hz();
- if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
+ /* get the SDMMC clock */
+ clk_input =
+ readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
+ clk_hz /= (clk_input + 1);
+ break;
- /* get the qspi clock */
- reg = readl(&clock_manager_base->main_pll.mainqspiclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
+ case CLKMGR_SDMMC_CLK_SRC_PER:
+ clk_hz = cm_get_per_vco_clk_hz();
- /* get the qspi clock */
- reg = readl(&clock_manager_base->per_pll.perqspiclk);
- clock /= (reg + 1);
+ /* get the SDMMC clock */
+ clk_input =
+ readl(&clock_manager_base->per_pll.pernandsdmmcclk);
+ clk_hz /= (clk_input + 1);
+ break;
+#endif
}
-
- return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
-
- return clock;
+ return clk_hz/4;
}
static void cm_print_clock_quick_summary(void)
{
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
+ printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
+ printf("QSPI %8d kHz\n",
+ cm_get_qspi_controller_clk_hz() / 1000);
+ printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ printf("EOSC1 %8d kHz\n", eosc1_hz / 1000);
+ printf("cb_intosc %8d kHz\n", cb_intosc_hz / 1000);
+ printf("f2s_free %8d kHz\n", f2s_free_hz / 1000);
+ printf("Main VCO %8d kHz\n", cm_get_main_vco_clk_hz()/1000);
+ printf("NOC %8d kHz\n", cm_get_noc_clk_hz()/1000);
+ printf("L4 Main %8d kHz\n",
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB)/1000);
+ printf("L4 MP %8d kHz\n",
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB)/1000);
+ printf("L4 SP %8d kHz\n",
+ cm_get_l4_sp_clk_hz()/1000);
+ printf("L4 sys free %8d kHz\n", cm_l4_sys_free_clk_hz/1000);
+#elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
- printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
- printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
- printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
-int set_cpu_clk_info(void)
-{
- /* Calculate the clock frequencies required for drivers */
- cm_get_l4_sp_clk_hz();
- cm_get_mmc_controller_clk_hz();
-
- gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
- gd->bd->bi_dsp_freq = 0;
- gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
-
- return 0;
+#endif
}
int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c
new file mode 100644
index 0000000..93165b4
--- /dev/null
+++ b/arch/arm/mach-socfpga/clock_manager_arria10.c
@@ -0,0 +1,954 @@
+/*
+ * Copyright (C) 2016, Intel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cm_basic_init(const void* blob);
+uint32_t eosc1_hz;
+uint32_t cb_intosc_hz;
+uint32_t f2s_free_hz;
+unsigned int cm_l4_main_clk_hz;
+unsigned int cm_l4_sp_clk_hz;
+unsigned int cm_l4_mp_clk_hz;
+unsigned int cm_l4_sys_free_clk_hz;
+
+struct strtopu32 {
+ const char *str;
+ uint32_t *p;
+};
+
+struct mainpll_cfg {
+ uint32_t vco0_psrc;
+ uint32_t vco1_denom;
+ uint32_t vco1_numer;
+ uint32_t mpuclk;
+ uint32_t mpuclk_cnt;
+ uint32_t mpuclk_src;
+ uint32_t nocclk;
+ uint32_t nocclk_cnt;
+ uint32_t nocclk_src;
+ uint32_t cntr2clk_cnt;
+ uint32_t cntr3clk_cnt;
+ uint32_t cntr4clk_cnt;
+ uint32_t cntr5clk_cnt;
+ uint32_t cntr6clk_cnt;
+ uint32_t cntr7clk_cnt;
+ uint32_t cntr7clk_src;
+ uint32_t cntr8clk_cnt;
+ uint32_t cntr9clk_cnt;
+ uint32_t cntr9clk_src;
+ uint32_t cntr15clk_cnt;
+ uint32_t nocdiv_l4mainclk;
+ uint32_t nocdiv_l4mpclk;
+ uint32_t nocdiv_l4spclk;
+ uint32_t nocdiv_csatclk;
+ uint32_t nocdiv_cstraceclk;
+ uint32_t nocdiv_cspdbclk;
+};
+
+struct perpll_cfg {
+ uint32_t vco0_psrc;
+ uint32_t vco1_denom;
+ uint32_t vco1_numer;
+ uint32_t cntr2clk_cnt;
+ uint32_t cntr2clk_src;
+ uint32_t cntr3clk_cnt;
+ uint32_t cntr3clk_src;
+ uint32_t cntr4clk_cnt;
+ uint32_t cntr4clk_src;
+ uint32_t cntr5clk_cnt;
+ uint32_t cntr5clk_src;
+ uint32_t cntr6clk_cnt;
+ uint32_t cntr6clk_src;
+ uint32_t cntr7clk_cnt;
+ uint32_t cntr8clk_cnt;
+ uint32_t cntr8clk_src;
+ uint32_t cntr9clk_cnt;
+ uint32_t emacctl_emac0sel;
+ uint32_t emacctl_emac1sel;
+ uint32_t emacctl_emac2sel;
+ uint32_t gpiodiv_gpiodbclk;
+};
+
+struct alteragrp_cfg {
+ uint32_t nocclk;
+ uint32_t mpuclk;
+};
+
+unsigned int cm_get_noc_clk_hz(void);
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift);
+static int of_to_struct(const void *blob, int node, int cfg__len, void *cfg);
+static int of_get_input_clks(const void *blob, int node, void *cfg);
+static int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg, struct alteragrp_cfg *altrgrp_cfg);
+static unsigned int cm_calc_handoff_main_vco_clk_hz(
+ struct mainpll_cfg *main_cfg);
+static unsigned int cm_calc_handoff_periph_vco_clk_hz(
+ struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg);
+static int cm_is_pll_ramp_required(int main0periph1,
+ struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg);
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+ struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg,
+ unsigned int safe_hz);
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg, unsigned int pll_ramp_main_hz);
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg, unsigned int pll_ramp_periph_hz);
+static int cm_full_cfg(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg);
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
+
+void cm_use_intosc(void)
+{
+ setbits_le32(&clock_manager_base->ctrl,
+ CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK);
+}
+
+unsigned int cm_get_noc_clk_hz(void)
+{
+ unsigned int clk_src, dividor, nocclk, src_hz;
+
+ nocclk = readl(&clock_manager_base->main_pll.nocclk);
+ clk_src = (nocclk >> CLKMGR_MAINPLL_NOCCLK_SRC_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_SRC_MSK;
+
+ dividor = 1 + (nocclk & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+ if (clk_src == CLKMGR_PERPLLGRP_SRC_MAIN) {
+ src_hz = cm_get_main_vco_clk_hz();
+ src_hz /= 1 +
+ (readl(SOCFPGA_CLKMGR_ADDRESS+CLKMGR_MAINPLL_NOC_CLK_OFFSET)&
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_PERI) {
+ src_hz = cm_get_per_vco_clk_hz();
+ src_hz /= 1 +
+ ((readl(SOCFPGA_CLKMGR_ADDRESS+CLKMGR_MAINPLL_NOC_CLK_OFFSET)>>
+ CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB)&
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK);
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_OSC1) {
+ src_hz = eosc1_hz;
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_INTOSC) {
+ src_hz = cb_intosc_hz;
+ } else if (clk_src == CLKMGR_PERPLLGRP_SRC_FPGA) {
+ src_hz = f2s_free_hz;
+ } else {
+ src_hz = 0;
+ }
+ return src_hz/dividor;
+}
+
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift)
+{
+ unsigned int dividor2 = 1 <<
+ ((readl(&clock_manager_base->main_pll.nocdiv) >>
+ nocdivshift) & CLKMGR_MAINPLL_NOCDIV_MSK);
+
+ return cm_get_noc_clk_hz()/dividor2;
+}
+
+int of_to_struct(const void *blob, int node, int cfg_len, void *cfg)
+{
+ if (fdtdec_get_int_array(blob, node, "altr,of_reg_value",
+ (u32*)cfg, cfg_len)) {
+ /* could not find required property */
+ return 100;
+ }
+
+ return 0;
+}
+
+static int of_get_input_clks(const void *blob, int node, void *cfg)
+{
+ if (fdtdec_get_int_array(blob, node, "clock-frequency",
+ (u32*)cfg, 1)) {
+ /* could not find required property */
+ return 100;
+ }
+
+ return 0;
+}
+
+int of_get_clk_cfg(const void *blob, struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg, struct alteragrp_cfg *altrgrp_cfg)
+{
+ int node, child, len;
+ const char *node_name;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_ALTERA_SOCFPGA_CLK);
+
+ if (node < 0)
+ return 1;
+
+ child = fdt_first_subnode(blob, node);
+
+ if (child < 0)
+ return 2;
+
+ child = fdt_first_subnode(blob, child);
+
+ if (child < 0)
+ return 3;
+
+ node_name = fdt_get_name(blob, child, &len);
+
+ while (node_name) {
+ if (!strcmp(node_name, "osc1")) {
+ if (of_get_input_clks(blob, child, &eosc1_hz))
+ return 101;
+ } else if (!strcmp(node_name, "cb_intosc_ls_clk")) {
+ if (of_get_input_clks(blob, child, &cb_intosc_hz))
+ return 102;
+ } else if (!strcmp(node_name, "f2s_free_clk")) {
+ if (of_get_input_clks(blob, child, &f2s_free_hz))
+ return 103;
+ } else if (!strcmp(node_name, "main_pll")) {
+ if (of_to_struct(blob, child, sizeof(*main_cfg)/sizeof(uint32_t),
+ main_cfg))
+ return 104;
+ } else if (!strcmp(node_name, "periph_pll")) {
+ if (of_to_struct(blob, child, sizeof(*per_cfg)/sizeof(uint32_t),
+ per_cfg))
+ return 105;
+ } else if (!strcmp(node_name, "altera")) {
+ if (of_to_struct(blob, child,
+ sizeof(*altrgrp_cfg)/sizeof(uint32_t), altrgrp_cfg))
+ return 106;
+
+ main_cfg->mpuclk = altrgrp_cfg->mpuclk;
+ main_cfg->nocclk = altrgrp_cfg->nocclk;
+ }
+ child = fdt_next_subnode(blob, child);
+
+ if (child < 0)
+ break;
+
+ node_name = fdt_get_name(blob, child, &len);
+ }
+
+ return 0;
+}
+
+/* calculate the intended main VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_main_vco_clk_hz
+ (struct mainpll_cfg *main_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check main VCO clock source: eosc, intosc or f2s? */
+ switch (main_cfg->vco0_psrc) {
+ case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ /* calculate the VCO frequency */
+ clk_hz /= (1 + main_cfg->vco1_denom);
+ clk_hz *= (1 + main_cfg->vco1_numer);
+
+ return clk_hz;
+}
+
+/* calculate the intended periph VCO frequency based on handoff */
+static unsigned int cm_calc_handoff_periph_vco_clk_hz
+ (struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check periph VCO clock source: eosc, intosc, f2s or mainpll? */
+ switch (per_cfg->vco0_psrc) {
+ case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= main_cfg->cntr15clk_cnt;
+ break;
+ default:
+ return 0;
+ }
+
+ /* calculate the VCO frequency */
+ clk_hz /= (1 + per_cfg->vco1_denom);
+ clk_hz *= (1 + per_cfg->vco1_numer);
+
+ return clk_hz;
+}
+
+/* calculate the intended MPU clock frequency based on handoff */
+static unsigned int cm_calc_handoff_mpu_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (main_cfg->mpuclk_src) {
+ case CLKMGR_MAINPLL_MPUCLK_SRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= ((main_cfg->mpuclk & CLKMGR_MAINPLL_MPUCLK_CNT_MSK)
+ + 1);
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_PERI:
+ clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+ clk_hz /= (((main_cfg->mpuclk >>
+ CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1);
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_MPUCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ clk_hz /= (main_cfg->mpuclk_cnt + 1);
+ return clk_hz;
+}
+
+/* calculate the intended NOC clock frequency based on handoff */
+static unsigned int cm_calc_handoff_noc_clk_hz(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+ unsigned int clk_hz;
+
+ /* Check MPU clock source: main, periph, osc1, intosc or f2s? */
+ switch (main_cfg->nocclk_src) {
+ case CLKMGR_MAINPLL_NOCCLK_SRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(main_cfg);
+ clk_hz /= ((main_cfg->nocclk & CLKMGR_MAINPLL_NOCCLK_CNT_MSK)
+ + 1);
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_PERI:
+ clk_hz = cm_calc_handoff_periph_vco_clk_hz(main_cfg, per_cfg);
+ clk_hz /= (((main_cfg->nocclk >>
+ CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1);
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_OSC1:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_NOCCLK_SRC_FPGA:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+
+ clk_hz /= (main_cfg->nocclk_cnt + 1);
+ return clk_hz;
+}
+
+/* return 1 if PLL ramp is required */
+static int cm_is_pll_ramp_required(int main0periph1,
+ struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg)
+{
+
+ /* Check for main PLL */
+ if (main0periph1 == 0) {
+ /*
+ * PLL ramp is not required if both MPU clock and NOC clock are
+ * not sourced from main PLL
+ */
+ if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+ main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_MAIN)
+ return 0;
+
+ /*
+ * PLL ramp is required if MPU clock is sourced from main PLL
+ * and MPU clock is over 900MHz (as advised by HW team)
+ */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN &&
+ (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+ return 1;
+
+ /*
+ * PLL ramp is required if NOC clock is sourced from main PLL
+ * and NOC clock is over 300MHz (as advised by HW team)
+ */
+ if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN &&
+ (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+ return 2;
+
+ } else if (main0periph1 == 1) {
+ /*
+ * PLL ramp is not required if both MPU clock and NOC clock are
+ * not sourced from periph PLL
+ */
+ if (main_cfg->mpuclk_src != CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+ main_cfg->nocclk_src != CLKMGR_MAINPLL_NOCCLK_SRC_PERI)
+ return 0;
+
+ /*
+ * PLL ramp is required if MPU clock are source from periph PLL
+ * and MPU clock is over 900MHz (as advised by HW team)
+ */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI &&
+ (cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ))
+ return 1;
+
+ /*
+ * PLL ramp is required if NOC clock are source from periph PLL
+ * and NOC clock is over 300MHz (as advised by HW team)
+ */
+ if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI &&
+ (cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg) >
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ))
+ return 2;
+ }
+ return 0;
+}
+
+/*
+ * Calculate the new PLL numerator which is based on existing DTS hand off and
+ * intended safe frequency (safe_hz). Note that PLL ramp is only modifying the
+ * numerator while maintaining denominator as denominator will influence the
+ * jitter condition. Please refer A10 HPS TRM for the jitter guide. Note final
+ * value for numerator is minus with 1 to cater our register value
+ * representation.
+ */
+static unsigned int cm_calc_safe_pll_numer(int main0periph1,
+ struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int safe_hz)
+{
+ unsigned int clk_hz = 0;
+
+ /* Check for main PLL */
+ if (main0periph1 == 0) {
+ /* Check main VCO clock source: eosc, intosc or f2s? */
+ switch (main_cfg->vco0_psrc) {
+ case CLKMGR_MAINPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_MAINPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ default:
+ return 0;
+ }
+ /* Applicable if MPU clock is from main PLL */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+ /* calculate the safe numer value */
+ clk_hz = (safe_hz / clk_hz) *
+ (main_cfg->mpuclk_cnt + 1) *
+ ((main_cfg->mpuclk &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1) *
+ (1 + main_cfg->vco1_denom) - 1;
+ }
+ /* Reach here if MPU clk not from main PLL but NOC clk is */
+ else if (main_cfg->nocclk_src ==
+ CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+ /* calculate the safe numer value */
+ clk_hz = (safe_hz / clk_hz) *
+ (main_cfg->nocclk_cnt + 1) *
+ ((main_cfg->nocclk &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1) *
+ (1 + main_cfg->vco1_denom) - 1;
+ } else
+ clk_hz = 0;
+
+ } else if (main0periph1 == 1) {
+ /* Check periph VCO clock source: eosc, intosc, f2s, mainpll */
+ switch (per_cfg->vco0_psrc) {
+ case CLKMGR_PERPLL_VCO0_PSRC_EOSC:
+ clk_hz = eosc1_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC:
+ clk_hz = cb_intosc_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_F2S:
+ clk_hz = f2s_free_hz;
+ break;
+ case CLKMGR_PERPLL_VCO0_PSRC_MAIN:
+ clk_hz = cm_calc_handoff_main_vco_clk_hz(
+ main_cfg);
+ clk_hz /= main_cfg->cntr15clk_cnt;
+ break;
+ default:
+ return 0;
+ }
+ /* Applicable if MPU clock is from periph PLL */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+ /* calculate the safe numer value */
+ clk_hz = (safe_hz / clk_hz) *
+ (main_cfg->mpuclk_cnt + 1) *
+ (((main_cfg->mpuclk >>
+ CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_MPUCLK_CNT_MSK) + 1) *
+ (1 + per_cfg->vco1_denom) - 1;
+ }
+ /* Reach here if MPU clk not from periph PLL but NOC clk is */
+ else if (main_cfg->nocclk_src ==
+ CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+ /* calculate the safe numer value */
+ clk_hz = (safe_hz / clk_hz) *
+ (main_cfg->nocclk_cnt + 1) *
+ (((main_cfg->nocclk >>
+ CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB) &
+ CLKMGR_MAINPLL_NOCCLK_CNT_MSK) + 1) *
+ (1 + per_cfg->vco1_denom) - 1;
+ } else
+ clk_hz = 0;
+ }
+ return clk_hz;
+}
+
+/* ramping the main PLL to final value */
+static void cm_pll_ramp_main(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int pll_ramp_main_hz)
+{
+ unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+ /* find out the increment value */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_MAIN) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_MAIN) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+ }
+ /* execute the ramping here */
+ for (clk_hz = pll_ramp_main_hz + clk_incr_hz;
+ clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+ writel((main_cfg->vco1_denom <<
+ CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(0, main_cfg, per_cfg, clk_hz),
+ &clock_manager_base->main_pll.vco1);
+ udelay(1000);
+ cm_wait_for_lock(LOCKED_MASK);
+ }
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ main_cfg->vco1_numer,
+ &clock_manager_base->main_pll.vco1);
+ udelay(1000);
+ cm_wait_for_lock(LOCKED_MASK);
+}
+
+/* ramping the periph PLL to final value */
+static void cm_pll_ramp_periph(struct mainpll_cfg *main_cfg,
+ struct perpll_cfg *per_cfg,
+ unsigned int pll_ramp_periph_hz)
+{
+ unsigned int clk_hz = 0, clk_incr_hz = 0, clk_final_hz = 0;
+
+ /* find out the increment value */
+ if (main_cfg->mpuclk_src == CLKMGR_MAINPLL_MPUCLK_SRC_PERI) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_mpu_clk_hz(main_cfg, per_cfg);
+ } else if (main_cfg->nocclk_src == CLKMGR_MAINPLL_NOCCLK_SRC_PERI) {
+ clk_incr_hz = CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ;
+ clk_final_hz = cm_calc_handoff_noc_clk_hz(main_cfg, per_cfg);
+ }
+ /* execute the ramping here */
+ for (clk_hz = pll_ramp_periph_hz + clk_incr_hz;
+ clk_hz < clk_final_hz; clk_hz += clk_incr_hz) {
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(1, main_cfg, per_cfg, clk_hz),
+ &clock_manager_base->per_pll.vco1);
+ udelay(1000);
+ cm_wait_for_lock(LOCKED_MASK);
+ }
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ per_cfg->vco1_numer,
+ &clock_manager_base->per_pll.vco1);
+ udelay(1000);
+ cm_wait_for_lock(LOCKED_MASK);
+}
+
+/*
+ * Setup clocks while making no assumptions of the
+ * previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ *
+ * Put all plls in bypass
+ *
+ * Put all plls VCO registers back to reset value (bgpwr dwn).
+ *
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ *
+ * Delay 5 us.
+ *
+ * Deassert bg pwr dn and set numerator and denominator
+ *
+ * Start 7 us timer.
+ *
+ * set internal dividers
+ *
+ * Wait for 7 us timer.
+ *
+ * Enable plls
+ *
+ * Set external dividers while plls are locking
+ *
+ * Wait for pll lock
+ *
+ * Assert/deassert outreset all.
+ *
+ * Take all pll's out of bypass
+ *
+ * Clear safe mode
+ *
+ * set source main and peripheral clocks
+ *
+ * Ungate clocks
+ */
+
+static int cm_full_cfg(struct mainpll_cfg *main_cfg, struct perpll_cfg *per_cfg)
+{
+ unsigned int pll_ramp_main_hz = 0, pll_ramp_periph_hz = 0,
+ ramp_required;
+
+ /* gate off all mainpll clock excpet HW managed clock */
+ writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+ CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+ &clock_manager_base->main_pll.enr);
+
+ /* now we can gate off the rest of the peripheral clocks */
+ writel(0, &clock_manager_base->per_pll.en);
+
+ /* Put all plls in external bypass */
+ writel(CLKMGR_MAINPLL_BYPASS_RESET,
+ &clock_manager_base->main_pll.bypasss);
+ writel(CLKMGR_PERPLL_BYPASS_RESET,
+ &clock_manager_base->per_pll.bypasss);
+
+ /*
+ * Put all plls VCO registers back to reset value.
+ * Some code might have messed with them. At same time set the
+ * desired clock source
+ */
+ writel(CLKMGR_MAINPLL_VCO0_RESET |
+ CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK |
+ (main_cfg->vco0_psrc <<
+ CLKMGR_MAINPLL_VCO0_PSRC_LSB),
+ &clock_manager_base->main_pll.vco0);
+
+ writel(CLKMGR_PERPLL_VCO0_RESET |
+ CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK |
+ (per_cfg->vco0_psrc <<
+ CLKMGR_PERPLL_VCO0_PSRC_LSB),
+ &clock_manager_base->per_pll.vco0);
+
+ writel(CLKMGR_MAINPLL_VCO1_RESET,
+ &clock_manager_base->main_pll.vco1);
+ writel(CLKMGR_PERPLL_VCO1_RESET,
+ &clock_manager_base->per_pll.vco1);
+
+ /* clear the interrupt register status register */
+ writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK,
+ &clock_manager_base->intr);
+
+ /* Program VCO “Numerator” and “Denominator” for main PLL */
+ ramp_required = cm_is_pll_ramp_required(0, main_cfg, per_cfg);
+ if (ramp_required) {
+ /* set main PLL to safe starting threshold frequency */
+ if (ramp_required == 1)
+ pll_ramp_main_hz = CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+ else if (ramp_required == 2)
+ pll_ramp_main_hz = CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(0, main_cfg, per_cfg,
+ pll_ramp_main_hz),
+ &clock_manager_base->main_pll.vco1);
+ } else
+ writel((main_cfg->vco1_denom << CLKMGR_MAINPLL_VCO1_DENOM_LSB) |
+ main_cfg->vco1_numer,
+ &clock_manager_base->main_pll.vco1);
+
+ /* Program VCO “Numerator” and “Denominator” for periph PLL */
+ ramp_required = cm_is_pll_ramp_required(1, main_cfg, per_cfg);
+ if (ramp_required) {
+ /* set periph PLL to safe starting threshold frequency */
+ if (ramp_required == 1)
+ pll_ramp_periph_hz =
+ CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ;
+ else if (ramp_required == 2)
+ pll_ramp_periph_hz =
+ CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ;
+
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ cm_calc_safe_pll_numer(1, main_cfg, per_cfg,
+ pll_ramp_periph_hz),
+ &clock_manager_base->per_pll.vco1);
+ } else
+ writel((per_cfg->vco1_denom << CLKMGR_PERPLL_VCO1_DENOM_LSB) |
+ per_cfg->vco1_numer,
+ &clock_manager_base->per_pll.vco1);
+
+ /* Wait for at least 5 us */
+ udelay(5);
+
+ /* Now deassert BGPWRDN and PWRDN */
+ clrbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK |
+ CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK);
+ clrbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK |
+ CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK);
+
+ /* Wait for at least 7 us */
+ udelay(7);
+
+ /* enable the VCO and disable the external regulator to PLL */
+ writel((readl(&clock_manager_base->main_pll.vco0) &
+ ~CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK) |
+ CLKMGR_MAINPLL_VCO0_EN_SET_MSK,
+ &clock_manager_base->main_pll.vco0);
+ writel((readl(&clock_manager_base->per_pll.vco0) &
+ ~CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK) |
+ CLKMGR_PERPLL_VCO0_EN_SET_MSK,
+ &clock_manager_base->per_pll.vco0);
+
+ /* setup all the main PLL counter and clock source */
+ writel(main_cfg->nocclk,
+ SOCFPGA_CLKMGR_ADDRESS + CLKMGR_MAINPLL_NOC_CLK_OFFSET);
+ writel(main_cfg->mpuclk,
+ SOCFPGA_CLKMGR_ADDRESS + CLKMGR_ALTERAGRP_MPU_CLK_OFFSET);
+
+ /* main_emaca_clk divider */
+ writel(main_cfg->cntr2clk_cnt,
+ &clock_manager_base->main_pll.cntr2clk);
+ /* main_emacb_clk divider */
+ writel(main_cfg->cntr3clk_cnt,
+ &clock_manager_base->main_pll.cntr3clk);
+ /* main_emac_ptp_clk divider */
+ writel(main_cfg->cntr4clk_cnt,
+ &clock_manager_base->main_pll.cntr4clk);
+ /* main_gpio_db_clk divider */
+ writel(main_cfg->cntr5clk_cnt,
+ &clock_manager_base->main_pll.cntr5clk);
+ /* main_sdmmc_clk divider */
+ writel(main_cfg->cntr6clk_cnt,
+ &clock_manager_base->main_pll.cntr6clk);
+ /* main_s2f_user0_clk divider */
+ writel(main_cfg->cntr7clk_cnt |
+ (main_cfg->cntr7clk_src <<
+ CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB),
+ &clock_manager_base->main_pll.cntr7clk);
+ /* main_s2f_user1_clk divider */
+ writel(main_cfg->cntr8clk_cnt,
+ &clock_manager_base->main_pll.cntr8clk);
+ /* main_hmc_pll_clk divider */
+ writel(main_cfg->cntr9clk_cnt |
+ (main_cfg->cntr9clk_src <<
+ CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB),
+ &clock_manager_base->main_pll.cntr9clk);
+ /* main_periph_ref_clk divider */
+ writel(main_cfg->cntr15clk_cnt,
+ &clock_manager_base->main_pll.cntr15clk);
+
+ /* setup all the peripheral PLL counter and clock source */
+ /* peri_emaca_clk divider */
+ writel(per_cfg->cntr2clk_cnt |
+ (per_cfg->cntr2clk_src << CLKMGR_PERPLL_CNTR2CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr2clk);
+ /* peri_emacb_clk divider */
+ writel(per_cfg->cntr3clk_cnt |
+ (per_cfg->cntr3clk_src << CLKMGR_PERPLL_CNTR3CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr3clk);
+ /* peri_emac_ptp_clk divider */
+ writel(per_cfg->cntr4clk_cnt |
+ (per_cfg->cntr4clk_src << CLKMGR_PERPLL_CNTR4CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr4clk);
+ /* peri_gpio_db_clk divider */
+ writel(per_cfg->cntr5clk_cnt |
+ (per_cfg->cntr5clk_src << CLKMGR_PERPLL_CNTR5CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr5clk);
+ /* peri_sdmmc_clk divider */
+ writel(per_cfg->cntr6clk_cnt |
+ (per_cfg->cntr6clk_src << CLKMGR_PERPLL_CNTR6CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr6clk);
+ /* peri_s2f_user0_clk divider */
+ writel(per_cfg->cntr7clk_cnt,
+ &clock_manager_base->per_pll.cntr7clk);
+ /* peri_s2f_user1_clk divider */
+ writel(per_cfg->cntr8clk_cnt |
+ (per_cfg->cntr8clk_src << CLKMGR_PERPLL_CNTR8CLK_SRC_LSB),
+ &clock_manager_base->per_pll.cntr8clk);
+ /* peri_hmc_pll_clk divider */
+ writel(per_cfg->cntr9clk_cnt,
+ &clock_manager_base->per_pll.cntr9clk);
+
+ /* setup all the external PLL counter */
+ /* mpu wrapper / external divider */
+ writel(main_cfg->mpuclk_cnt |
+ (main_cfg->mpuclk_src <<
+ CLKMGR_MAINPLL_MPUCLK_SRC_LSB),
+ &clock_manager_base->main_pll.mpuclk);
+ /* NOC wrapper / external divider */
+ writel(main_cfg->nocclk_cnt |
+ (main_cfg->nocclk_src << CLKMGR_MAINPLL_NOCCLK_SRC_LSB),
+ &clock_manager_base->main_pll.nocclk);
+ /* NOC subclock divider such as l4 */
+ writel(main_cfg->nocdiv_l4mainclk |
+ (main_cfg->nocdiv_l4mpclk <<
+ CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB) |
+ (main_cfg->nocdiv_l4spclk <<
+ CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB) |
+ (main_cfg->nocdiv_csatclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB) |
+ (main_cfg->nocdiv_cstraceclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB) |
+ (main_cfg->nocdiv_cspdbclk <<
+ CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB),
+ &clock_manager_base->main_pll.nocdiv);
+ /* gpio_db external divider */
+ writel(per_cfg->gpiodiv_gpiodbclk,
+ &clock_manager_base->per_pll.gpiodiv);
+
+ /* setup the EMAC clock mux select */
+ writel((per_cfg->emacctl_emac0sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB) |
+ (per_cfg->emacctl_emac1sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB) |
+ (per_cfg->emacctl_emac2sel <<
+ CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB),
+ &clock_manager_base->per_pll.emacctl);
+
+ /* at this stage, check for PLL lock status */
+ cm_wait_for_lock(LOCKED_MASK);
+
+ /*
+ * after locking, but before taking out of bypass,
+ * assert/deassert outresetall
+ */
+ /* assert mainpll outresetall */
+ setbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* assert perpll outresetall */
+ setbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* de-assert mainpll outresetall */
+ clrbits_le32(&clock_manager_base->main_pll.vco0,
+ CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK);
+ /* de-assert perpll outresetall */
+ clrbits_le32(&clock_manager_base->per_pll.vco0,
+ CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK);
+
+ /* Take all PLLs out of bypass when boot mode is cleared. */
+ /* release mainpll from bypass */
+ writel(CLKMGR_MAINPLL_BYPASS_RESET,
+ &clock_manager_base->main_pll.bypassr);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* release perpll from bypass */
+ writel(CLKMGR_PERPLL_BYPASS_RESET,
+ &clock_manager_base->per_pll.bypassr);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* clear boot mode */
+ clrbits_le32(&clock_manager_base->ctrl,
+ CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK);
+ /* wait till Clock Manager is not busy */
+ cm_wait_for_fsm();
+
+ /* At here, we need to ramp to final value if needed */
+ if (pll_ramp_main_hz != 0)
+ cm_pll_ramp_main(main_cfg, per_cfg, pll_ramp_main_hz);
+ if (pll_ramp_periph_hz != 0)
+ cm_pll_ramp_periph(main_cfg, per_cfg, pll_ramp_periph_hz);
+
+ /* Now ungate non-hw-managed clocks */
+ writel(CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK |
+ CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK,
+ &clock_manager_base->main_pll.ens);
+ writel(CLKMGR_PERPLL_EN_RESET,
+ &clock_manager_base->per_pll.ens);
+
+ /* Clear the loss lock and slip bits as they might set during
+ clock reconfiguration */
+ writel(CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK |
+ CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK,
+ &clock_manager_base->intr);
+
+ return 0;
+}
+
+int cm_basic_init(const void *blob)
+{
+ struct mainpll_cfg main_cfg;
+ struct perpll_cfg per_cfg;
+ struct alteragrp_cfg altrgrp_cfg;
+ int rval;
+
+ /* initialize to zero for use case of optional node */
+ memset(&main_cfg, 0, sizeof(main_cfg));
+ memset(&per_cfg, 0, sizeof(per_cfg));
+ memset(&altrgrp_cfg, 0, sizeof(altrgrp_cfg));
+
+ if (of_get_clk_cfg(blob, &main_cfg, &per_cfg, &altrgrp_cfg)) {
+ return 1;
+ }
+
+ rval = cm_full_cfg(&main_cfg, &per_cfg);
+
+ cm_l4_main_clk_hz =
+ cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB);
+
+ cm_l4_mp_clk_hz = cm_get_l4_noc_hz(CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB);
+
+ cm_l4_sp_clk_hz = cm_get_l4_sp_clk_hz();
+
+ cm_l4_sys_free_clk_hz = cm_get_noc_clk_hz()/4;
+
+ return rval;
+}
diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager_gen5.c
similarity index 62%
copy from arch/arm/mach-socfpga/clock_manager.c
copy to arch/arm/mach-socfpga/clock_manager_gen5.c
index aa71636..f4bb02b 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager_gen5.c
@@ -1,7 +1,7 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2016, Intel Corporation
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
@@ -10,31 +10,19 @@
DECLARE_GLOBAL_DATA_PTR;
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+static void cm_write_bypass(uint32_t val);
+static void cm_write_ctrl(uint32_t val);
+static void cm_write_with_phase(uint32_t value,
+ uint32_t reg_address, uint32_t mask);
+unsigned long cm_get_sdram_clk_hz(void);
+int set_cpu_clk_info(void);
+
static const struct socfpga_clock_manager *clock_manager_base =
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
-static void cm_wait_for_lock(uint32_t mask)
-{
- register uint32_t inter_val;
- uint32_t retry = 0;
- do {
- inter_val = readl(&clock_manager_base->inter) & mask;
- if (inter_val == mask)
- retry++;
- else
- retry = 0;
- if (retry >= 10)
- break;
- } while (1);
-}
-
-/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
-{
- while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
- ;
-}
-
/*
* function to write the bypass register which requires a poll of the
* busy bit
@@ -87,7 +75,6 @@ static void cm_write_with_phase(uint32_t value,
* set source main and peripheral clocks
* Ungate clocks
*/
-
void cm_basic_init(const struct cm_config * const cfg)
{
unsigned long end;
@@ -230,11 +217,6 @@ void cm_basic_init(const struct cm_config * const cfg)
writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-#define LOCKED_MASK \
- (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
- CLKMGR_INTER_PERPLLLOCKED_MASK | \
- CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
cm_wait_for_lock(LOCKED_MASK);
/* write the sdram clock counters before toggling outreset all */
@@ -328,60 +310,6 @@ void cm_basic_init(const struct cm_config * const cfg)
&clock_manager_base->inter);
}
-static unsigned int cm_get_main_vco_clk_hz(void)
-{
- uint32_t reg, clock;
-
- /* get the main VCO clock */
- reg = readl(&clock_manager_base->main_pll.vco);
- clock = cm_get_osc_clk_hz(1);
- clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify PER PLL clock source */
- reg = readl(&clock_manager_base->per_pll.vco);
- reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_per_ref_clk_hz();
-
- /* get the PER VCO clock */
- reg = readl(&clock_manager_base->per_pll.vco);
- clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-unsigned long cm_get_mpu_clk_hz(void)
-{
- uint32_t reg, clock;
-
- clock = cm_get_main_vco_clk_hz();
-
- /* get the MPU clock */
- reg = readl(&clock_manager_base->altera.mpuclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mpuclk);
- clock /= (reg + 1);
- return clock;
-}
-
unsigned long cm_get_sdram_clk_hz(void)
{
uint32_t reg, clock = 0;
@@ -412,147 +340,3 @@ unsigned long cm_get_sdram_clk_hz(void)
return clock;
}
-
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of L4 SP clock */
- reg = readl(&clock_manager_base->main_pll.l4src);
- reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
- CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
-
- if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (main clk) */
- reg = readl(&clock_manager_base->altera.mainclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mainclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
- }
-
- /* get the L4 SP clock which supplied to UART */
- reg = readl(&clock_manager_base->main_pll.maindiv);
- reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
- CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
- clock = clock / (1 << reg);
-
- return clock;
-}
-
-unsigned int cm_get_mmc_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of MMC clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
- CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
- if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
- clock /= (reg + 1);
- }
-
- /* further divide by 4 as we have fixed divider at wrapper */
- clock /= 4;
- return clock;
-}
-
-unsigned int cm_get_qspi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of QSPI clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
- CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
-
- if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->main_pll.mainqspiclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->per_pll.perqspiclk);
- clock /= (reg + 1);
- }
-
- return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
-
- return clock;
-}
-
-static void cm_print_clock_quick_summary(void)
-{
- printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
- printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
- printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
- printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
- printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
- printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
- printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
- printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
- printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
- printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
-}
-
-int set_cpu_clk_info(void)
-{
- /* Calculate the clock frequencies required for drivers */
- cm_get_l4_sp_clk_hz();
- cm_get_mmc_controller_clk_hz();
-
- gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
- gd->bd->bi_dsp_freq = 0;
- gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
-
- return 0;
-}
-
-int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- cm_print_clock_quick_summary();
- return 0;
-}
-
-U_BOOT_CMD(
- clocks, CONFIG_SYS_MAXARGS, 1, do_showclocks,
- "display clocks",
- ""
-);
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager.h b/arch/arm/mach-socfpga/include/mach/clock_manager.h
index 2675951..45943ea 100644
--- a/arch/arm/mach-socfpga/include/mach/clock_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2016 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,21 +8,9 @@
#define _CLOCK_MANAGER_H_
#ifndef __ASSEMBLER__
-/* Clock speed accessors */
-unsigned long cm_get_mpu_clk_hz(void);
-unsigned long cm_get_sdram_clk_hz(void);
-unsigned int cm_get_l4_sp_clk_hz(void);
-unsigned int cm_get_mmc_controller_clk_hz(void);
-unsigned int cm_get_qspi_controller_clk_hz(void);
-unsigned int cm_get_spi_controller_clk_hz(void);
-const unsigned int cm_get_osc_clk_hz(const int osc);
-const unsigned int cm_get_f2s_per_ref_clk_hz(void);
-const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
-
-/* Clock configuration accessors */
-const struct cm_config * const cm_get_default_config(void);
-#endif
+#include <linux/types.h>
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
struct cm_config {
/* main group */
uint32_t main_vco_base;
@@ -57,74 +45,196 @@ struct cm_config {
uint32_t s2fuser2clk;
};
+struct socfpga_clock_manager_sdr_pll {
+ uint32_t vco;
+ uint32_t ctrl;
+ uint32_t ddrdqsclk;
+ uint32_t ddr2xdqsclk;
+ uint32_t ddrdqclk;
+ uint32_t s2fuser2clk;
+ uint32_t en;
+ uint32_t stat;
+};
+#endif
+
+/* Common prototypes */
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+void cm_use_intosc(void);
+void cm_wait_for_lock(uint32_t mask);
+void cm_wait_for_fsm(void);
+unsigned int cm_get_main_vco_clk_hz(void);
+unsigned int cm_get_per_vco_clk_hz(void);
+unsigned long cm_get_mpu_clk_hz(void);
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+/* Clock speed accessors */
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
void cm_basic_init(const struct cm_config * const cfg);
+unsigned long cm_get_sdram_clk_hz(void);
+/* Clock configuration accessors */
+const struct cm_config * const cm_get_default_config(void);
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+unsigned int cm_get_noc_clk_hz(void);
+unsigned int cm_get_l4_noc_hz(unsigned int nocdivshift);
+int cm_basic_init(const void* blob);
+extern unsigned int cm_l4_main_clk_hz;
+extern unsigned int cm_l4_sp_clk_hz;
+extern unsigned int cm_l4_mp_clk_hz;
+extern unsigned int cm_l4_sys_free_clk_hz;
+extern uint32_t eosc1_hz;
+extern uint32_t cb_intosc_hz;
+extern uint32_t f2s_free_hz;
+#endif
+#endif
struct socfpga_clock_manager_main_pll {
- u32 vco;
- u32 misc;
- u32 mpuclk;
- u32 mainclk;
- u32 dbgatclk;
- u32 mainqspiclk;
- u32 mainnandsdmmcclk;
- u32 cfgs2fuser0clk;
- u32 en;
- u32 maindiv;
- u32 dbgdiv;
- u32 tracediv;
- u32 l4src;
- u32 stat;
- u32 _pad_0x38_0x40[2];
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t vco;
+ uint32_t misc;
+ uint32_t mpuclk;
+ uint32_t mainclk;
+ uint32_t dbgatclk;
+ uint32_t mainqspiclk;
+ uint32_t mainnandsdmmcclk;
+ uint32_t cfgs2fuser0clk;
+ uint32_t en;
+ uint32_t maindiv;
+ uint32_t dbgdiv;
+ uint32_t tracediv;
+ uint32_t l4src;
+ uint32_t stat;
+ uint32_t _pad_0x38_0x40[2];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ uint32_t vco0;
+ uint32_t vco1;
+ uint32_t en;
+ uint32_t ens;
+ uint32_t enr;
+ uint32_t bypass;
+ uint32_t bypasss;
+ uint32_t bypassr;
+ uint32_t mpuclk;
+ uint32_t nocclk;
+ uint32_t cntr2clk;
+ uint32_t cntr3clk;
+ uint32_t cntr4clk;
+ uint32_t cntr5clk;
+ uint32_t cntr6clk;
+ uint32_t cntr7clk;
+ uint32_t cntr8clk;
+ uint32_t cntr9clk;
+ uint32_t pad_0x48_0x5b[5];
+ uint32_t cntr15clk;
+ uint32_t outrst;
+ uint32_t outrststat;
+ uint32_t nocdiv;
+ uint32_t pad_0x6c_0x80[5];
+#endif
};
struct socfpga_clock_manager_per_pll {
- u32 vco;
- u32 misc;
- u32 emac0clk;
- u32 emac1clk;
- u32 perqspiclk;
- u32 pernandsdmmcclk;
- u32 perbaseclk;
- u32 s2fuser1clk;
- u32 en;
- u32 div;
- u32 gpiodiv;
- u32 src;
- u32 stat;
- u32 _pad_0x34_0x40[3];
-};
-
-struct socfpga_clock_manager_sdr_pll {
- u32 vco;
- u32 ctrl;
- u32 ddrdqsclk;
- u32 ddr2xdqsclk;
- u32 ddrdqclk;
- u32 s2fuser2clk;
- u32 en;
- u32 stat;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t vco;
+ uint32_t misc;
+ uint32_t emac0clk;
+ uint32_t emac1clk;
+ uint32_t perqspiclk;
+ uint32_t pernandsdmmcclk;
+ uint32_t perbaseclk;
+ uint32_t s2fuser1clk;
+ uint32_t en;
+ uint32_t div;
+ uint32_t gpiodiv;
+ uint32_t src;
+ uint32_t stat;
+ uint32_t _pad_0x34_0x40[3];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ uint32_t vco0;
+ uint32_t vco1;
+ uint32_t en;
+ uint32_t ens;
+ uint32_t enr;
+ uint32_t bypass;
+ uint32_t bypasss;
+ uint32_t bypassr;
+ uint32_t pad_0x20_0x27[2];
+ uint32_t cntr2clk;
+ uint32_t cntr3clk;
+ uint32_t cntr4clk;
+ uint32_t cntr5clk;
+ uint32_t cntr6clk;
+ uint32_t cntr7clk;
+ uint32_t cntr8clk;
+ uint32_t cntr9clk;
+ uint32_t pad_0x48_0x5f[6];
+ uint32_t outrst;
+ uint32_t outrststat;
+ uint32_t emacctl;
+ uint32_t gpiodiv;
+ uint32_t pad_0x70_0x80[4];
+#endif
};
struct socfpga_clock_manager_altera {
- u32 mpuclk;
- u32 mainclk;
+ uint32_t mpuclk;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t mainclk;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ uint32_t nocclk;
+ uint32_t mainmisc0;
+ uint32_t mainmisc1;
+ uint32_t perimisc0;
+ uint32_t perimisc1;
+#endif
};
struct socfpga_clock_manager {
- u32 ctrl;
- u32 bypass;
- u32 inter;
- u32 intren;
- u32 dbctrl;
- u32 stat;
- u32 _pad_0x18_0x3f[10];
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+ uint32_t ctrl;
+ uint32_t bypass;
+ uint32_t inter;
+ uint32_t intren;
+ uint32_t dbctrl;
+ uint32_t stat;
+ uint32_t _pad_0x18_0x3f[10];
struct socfpga_clock_manager_main_pll main_pll;
struct socfpga_clock_manager_per_pll per_pll;
struct socfpga_clock_manager_sdr_pll sdr_pll;
struct socfpga_clock_manager_altera altera;
- u32 _pad_0xe8_0x200[70];
+ uint32_t _pad_0xe8_0x200[70];
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+ /* clkmgr */
+ uint32_t ctrl;
+ uint32_t intr;
+ uint32_t intrs;
+ uint32_t intrr;
+ uint32_t intren;
+ uint32_t intrens;
+ uint32_t intrenr;
+ uint32_t stat;
+ uint32_t testioctrl;
+ uint32_t _pad_0x24_0x40[7];
+ /* mainpllgrp */
+ struct socfpga_clock_manager_main_pll main_pll;
+ /* perpllgrp */
+ struct socfpga_clock_manager_per_pll per_pll;
+ struct socfpga_clock_manager_altera altera;
+#endif
};
+/* Common mask */
+#define CLKMGR_CLKMGR_STAT_BUSY_SET_MSK 0x00000001
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#define LOCKED_MASK \
+ (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
+ CLKMGR_INTER_PERPLLLOCKED_MASK | \
+ CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
#define CLKMGR_CTRL_SAFEMODE (1 << 0)
#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
@@ -310,5 +420,119 @@ struct socfpga_clock_manager {
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
-
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+#define CLKMGR_ALTERAGRP_MPU_CLK_OFFSET 0x140
+#define CLKMGR_MAINPLL_NOC_CLK_OFFSET 0x144
+#define LOCKED_MASK \
+ (CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK | \
+ CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK)
+
+/* value */
+#define CLKMGR_MAINPLL_BYPASS_RESET 0x0000003f
+#define CLKMGR_PERPLL_BYPASS_RESET 0x000000ff
+#define CLKMGR_MAINPLL_VCO0_RESET 0x00010053
+#define CLKMGR_MAINPLL_VCO1_RESET 0x00010001
+#define CLKMGR_PERPLL_VCO0_RESET 0x00010053
+#define CLKMGR_PERPLL_VCO1_RESET 0x00010001
+#define CLKMGR_MAINPLL_VCO0_PSRC_EOSC 0x0
+#define CLKMGR_MAINPLL_VCO0_PSRC_E_INTOSC 0x1
+#define CLKMGR_MAINPLL_VCO0_PSRC_F2S 0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_EOSC 0x0
+#define CLKMGR_PERPLL_VCO0_PSRC_E_INTOSC 0x1
+#define CLKMGR_PERPLL_VCO0_PSRC_F2S 0x2
+#define CLKMGR_PERPLL_VCO0_PSRC_MAIN 0x3
+
+/* mask */
+#define CLKMGR_MAINPLL_EN_S2FUSER0CLKEN_SET_MSK 0x00000040
+#define CLKMGR_MAINPLL_EN_HMCPLLREFCLKEN_SET_MSK 0x00000080
+#define CLKMGR_CLKMGR_STAT_MAINPLLLOCKED_SET_MSK 0x00000100
+#define CLKMGR_CLKMGR_STAT_PERPLLLOCKED_SET_MSK 0x00000200
+#define CLKMGR_CLKMGR_STAT_BOOTCLKSRC_SET_MSK 0x00020000
+#define CLKMGR_MAINPLL_VCO0_BGPWRDN_SET_MSK 0x00000001
+#define CLKMGR_MAINPLL_VCO0_PWRDN_SET_MSK 0x00000002
+#define CLKMGR_MAINPLL_VCO0_EN_SET_MSK 0x00000004
+#define CLKMGR_MAINPLL_VCO0_OUTRSTALL_SET_MSK 0x00000008
+#define CLKMGR_MAINPLL_VCO0_REGEXTSEL_SET_MSK 0x00000010
+#define CLKMGR_PERPLL_VCO0_BGPWRDN_SET_MSK 0x00000001
+#define CLKMGR_PERPLL_VCO0_PWRDN_SET_MSK 0x00000002
+#define CLKMGR_PERPLL_VCO0_EN_SET_MSK 0x00000004
+#define CLKMGR_PERPLL_VCO0_OUTRSTALL_SET_MSK 0x00000008
+#define CLKMGR_PERPLL_VCO0_REGEXTSEL_SET_MSK 0x00000010
+#define CLKMGR_CLKMGR_INTR_PERPLLFBSLIP_SET_MSK 0x00000800
+#define CLKMGR_CLKMGR_INTR_MAINPLLFBSLIP_SET_MSK 0x00000400
+#define CLKMGR_CLKMGR_INTR_PERPLLRFSLIP_SET_MSK 0x00000200
+#define CLKMGR_CLKMGR_INTR_MAINPLLRFSLIP_SET_MSK 0x00000100
+#define CLKMGR_CLKMGR_INTR_PERPLLLOST_SET_MSK 0x00000008
+#define CLKMGR_CLKMGR_INTR_MAINPLLLOST_SET_MSK 0x00000004
+#define CLKMGR_CLKMGR_INTR_MAINPLLACHIEVED_SET_MSK 0x00000001
+#define CLKMGR_CLKMGR_INTR_PERPLLACHIEVED_SET_MSK 0x00000002
+#define CLKMGR_CLKMGR_CTL_BOOTMOD_SET_MSK 0x00000001
+#define CLKMGR_CLKMGR_CTL_BOOTCLK_INTOSC_SET_MSK 0x00000300
+#define CLKMGR_PERPLL_EN_RESET 0x00000f7f
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000020
+#define CLKMGR_MAINPLL_VCO0_PSRC_MSK 0x00000003
+#define CLKMGR_MAINPLL_VCO1_NUMER_MSK 0x00001fff
+#define CLKMGR_MAINPLL_VCO1_DENOM_MSK 0x0000003f
+#define CLKMGR_MAINPLL_CNTRCLK_MSK 0x000003ff
+#define CLKMGR_PERPLL_VCO0_PSRC_MSK 0x00000003
+#define CLKMGR_PERPLL_VCO1_NUMER_MSK 0x00001fff
+#define CLKMGR_PERPLL_VCO1_DENOM_MSK 0x0000003f
+#define CLKMGR_PERPLL_CNTRCLK_MSK 0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MSK 0x00000007
+#define CLKMGR_MAINPLL_MPUCLK_CNT_MSK 0x000003ff
+#define CLKMGR_MAINPLL_MPUCLK_SRC_MAIN 0
+#define CLKMGR_MAINPLL_MPUCLK_SRC_PERI 1
+#define CLKMGR_MAINPLL_MPUCLK_SRC_OSC1 2
+#define CLKMGR_MAINPLL_MPUCLK_SRC_INTOSC 3
+#define CLKMGR_MAINPLL_MPUCLK_SRC_FPGA 4
+#define CLKMGR_MAINPLL_NOCDIV_MSK 0x00000003
+#define CLKMGR_MAINPLL_NOCCLK_CNT_MSK 0x000003ff
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MSK 0x00000007
+#define CLKMGR_MAINPLL_NOCCLK_SRC_MAIN 0
+#define CLKMGR_MAINPLL_NOCCLK_SRC_PERI 1
+#define CLKMGR_MAINPLL_NOCCLK_SRC_OSC1 2
+#define CLKMGR_MAINPLL_NOCCLK_SRC_INTOSC 3
+#define CLKMGR_MAINPLL_NOCCLK_SRC_FPGA 4
+
+#define CLKMGR_PERPLLGRP_SRC_MSK 0x00000007
+#define CLKMGR_PERPLLGRP_SRC_MAIN 0
+#define CLKMGR_PERPLLGRP_SRC_PERI 1
+#define CLKMGR_PERPLLGRP_SRC_OSC1 2
+#define CLKMGR_PERPLLGRP_SRC_INTOSC 3
+#define CLKMGR_PERPLLGRP_SRC_FPGA 4
+
+/* bit shifting macro */
+#define CLKMGR_MAINPLL_VCO0_PSRC_LSB 8
+#define CLKMGR_PERPLL_VCO0_PSRC_LSB 8
+#define CLKMGR_MAINPLL_VCO1_DENOM_LSB 16
+#define CLKMGR_PERPLL_VCO1_DENOM_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_PERICNT_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_NOCDIV_L4MAINCLK_LSB 0
+#define CLKMGR_MAINPLL_NOCDIV_L4MPCLK_LSB 8
+#define CLKMGR_MAINPLL_NOCDIV_L4SPCLK_LSB 16
+#define CLKMGR_MAINPLL_NOCDIV_CSATCLK_LSB 24
+#define CLKMGR_MAINPLL_NOCDIV_CSTRACECLK_LSB 26
+#define CLKMGR_MAINPLL_NOCDIV_CSPDBGCLK_LSB 28
+#define CLKMGR_MAINPLL_MPUCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_MPUCLK_PERICNT_LSB 16
+#define CLKMGR_MAINPLL_NOCCLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_CNTR7CLK_SRC_LSB 16
+#define CLKMGR_MAINPLL_CNTR9CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR2CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR3CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR4CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR5CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR6CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_CNTR8CLK_SRC_LSB 16
+#define CLKMGR_PERPLL_EMACCTL_EMAC0SEL_LSB 26
+#define CLKMGR_PERPLL_EMACCTL_EMAC1SEL_LSB 27
+#define CLKMGR_PERPLL_EMACCTL_EMAC2SEL_LSB 28
+
+/* PLL ramping work around */
+#define CLKMGR_PLL_RAMP_MPUCLK_THRESHOLD_HZ 900000000
+#define CLKMGR_PLL_RAMP_NOCCLK_THRESHOLD_HZ 300000000
+#define CLKMGR_PLL_RAMP_MPUCLK_INCREMENT_HZ 100000000
+#define CLKMGR_PLL_RAMP_NOCCLK_INCREMENT_HZ 33000000
+#endif
#endif /* _CLOCK_MANAGER_H_ */
--
2.2.0
More information about the U-Boot
mailing list