[U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework

[Michal Simek]

On 10.1.2017 15:05, Stefan.Herbrechtsmeier at weidmueller.com wrote:
> Hi Michal,
> 
>> -----Ursprüngliche Nachricht-----
>> Von: Michal Simek [mailto:michal.simek at xilinx.com]
>> Gesendet: Dienstag, 10. Januar 2017 14:30
>> An: Herbrechtsmeier, Stefan; michal.simek at xilinx.com;
>> jh80.chung at samsung.com; u-boot at lists.denx.de
>> Cc: sjg at chromium.org; monstr at monstr.eu; swarren at nvidia.com
>> Betreff: Re: AW: [PATCH v3 3/4] mmc: zynq: Determine base clock
>> frequency via clock framework
>>
>> On 10.1.2017 10:16, Stefan.Herbrechtsmeier at weidmueller.com wrote:
>>> Hi Michael
>>>
>>>> -----Ursprüngliche Nachricht-----
>>>> Von: Michal Simek [mailto:michal.simek at xilinx.com]
>>>> Gesendet: Dienstag, 6. Dezember 2016 13:59
>>>> An: Jaehoon Chung; Herbrechtsmeier, Stefan; u-boot at lists.denx.de
>>>> Cc: Michal Simek; Simon Glass; Albert Aribaud; Michal Simek; Stephen
>>>> Warren
>>>> Betreff: Re: [PATCH v3 3/4] mmc: zynq: Determine base clock
>> frequency
>>>> via clock framework
>>>>
>>>> On 5.12.2016 23:22, Jaehoon Chung wrote:
>>>>> On 12/02/2016 10:24 PM, stefan.herbrechtsmeier at weidmueller.de
>> wrote:
>>>>>> From: Stefan Herbrechtsmeier
>>>>>> <stefan.herbrechtsmeier at weidmueller.de>
>>>>>>
>>>>>> The zynq_sdhci controller driver use CONFIG_ZYNQ_SDHCI_MAX_FREQ as
>>>>>> base clock frequency but this clock is not fixed and depends on
>> the
>>>>>> hardware configuration. Additionally the value of
>>>>>> CONFIG_ZYNQ_SDHCI_MAX_FREQ doesn't match the real base clock
>>>>>> frequency of SDIO_FREQ. Use the clock framework to determine the
>>>> frequency at run time.
>>>>>>
>>>>>> Signed-off-by: Stefan Herbrechtsmeier
>>>>>> <stefan.herbrechtsmeier at weidmueller.de>
>>>>>
>>>>>
>>>>> Even if this patch is delegated to Michal, i picked to this.
>>>>> Applied on u-boot-mmc.
>>>>>
>>>>
>>>> Based on my reply in v2 this is not ideal patch
>>>> http://lists.denx.de/pipermail/u-boot/2016-November/274310.html
>>>>
>>>> Not a problem to take these patches should mmc tree but please wait
>>>> till you have Ack from me.
>>>>
>>> Will you ack the patch if I remove the zynq specific code and remove
>> the CONFIG_CLK check with my patch series to move zynq clk driver to
>> DM?
>>
>> Just going to look at our clk changes for zynq and it can be the part
>> of this series.
> Okay.
> 
>> Do you have branch somewhere with pending stuff?
> 
> I have no public branch.

ok. Can you please send it as the part of clk series you made?
I see that at least this patch will be different.

Thanks,
Michal