[U-Boot] [PATCH RESEND v2] at91: video: Support driver-model for the HLCD driver

Songjun Wu songjun.wu at microchip.com
Wed Jan 11 03:36:48 CET 2017


Add driver-model support to this driver.

Signed-off-by: Songjun Wu <songjun.wu at microchip.com>
---

Changes in v2:
- Due to the peripheral clock driver improvement, remove
  the unneccessary clock calling.

 drivers/video/Kconfig        |   7 +
 drivers/video/Makefile       |   2 +-
 drivers/video/atmel_hlcdfb.c | 314 ++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 319 insertions(+), 4 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8361a717e7..c40b2cffb0 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -362,6 +362,13 @@ config DISPLAY
 	   The devices provide a simple interface to start up the display,
 	   read display information and enable it.
 
+config VIDEO_ATMEL_HLCD
+	bool "Enable ATMEL video support using HLCDC"
+	depends on DM_VIDEO
+	help
+	   Only the LCD is supported in U-Boot. This option enables this support
+	   which can be used on devices which have an LCD display connected.
+
 config VIDEO_BROADWELL_IGD
 	bool "Enable Intel Broadwell integrated graphics device"
 	depends on X86
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3f045fe578..3d54cf91d1 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -22,7 +22,6 @@ endif
 obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
 
 obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
-obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
 obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
 obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o
 obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
@@ -35,6 +34,7 @@ obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
 obj-$(CONFIG_S6E63D6) += s6e63d6.o
 obj-$(CONFIG_LD9040) += ld9040.o
 obj-$(CONFIG_SED156X) += sed156x.o
+obj-$(CONFIG_VIDEO_ATMEL_HLCD) += atmel_hlcdfb.o
 obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
 obj-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
 obj-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 960b474b76..0bcb92b2cf 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -10,13 +10,24 @@
 #include <asm/io.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
+#include <clk.h>
+#include <dm.h>
+#include <fdtdec.h>
 #include <lcd.h>
+#include <video.h>
 #include <atmel_hlcdc.h>
 
 #if defined(CONFIG_LCD_LOGO)
 #include <bmp_logo.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
+#define lcdc_readl(reg)		__raw_readl((reg))
+#define lcdc_writel(reg, val)	__raw_writel((val), (reg))
+
+#ifndef CONFIG_DM_VIDEO
+
 /* configurable parameters */
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 #define ATMEL_LCDC_DMA_BURST_LEN	8
@@ -26,9 +37,6 @@
 
 #define ATMEL_LCDC_FIFO_SIZE		512
 
-#define lcdc_readl(reg)		__raw_readl((reg))
-#define lcdc_writel(reg, val)	__raw_writel((val), (reg))
-
 /*
  * the CLUT register map as following
  * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
@@ -218,3 +226,303 @@ void lcd_ctrl_init(void *lcdbase)
 	/* Enable flushing if we enabled dcache */
 	lcd_set_flush_dcache(1);
 }
+
+#else
+
+enum {
+	LCD_MAX_WIDTH		= 1024,
+	LCD_MAX_HEIGHT		= 768,
+	LCD_MAX_LOG2_BPP	= VIDEO_BPP16,
+};
+
+struct atmel_hlcdc_priv {
+	struct atmel_hlcd_regs *regs;
+	struct display_timing timing;
+	unsigned int vl_bpix;
+	unsigned int guard_time;
+	ulong clk_rate;
+};
+
+static int at91_hlcdc_enable_clk(struct udevice *dev)
+{
+	struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+	struct clk clk;
+	ulong clk_rate;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret)
+		return -EINVAL;
+
+	ret = clk_enable(&clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(&clk);
+	if (!clk_rate)
+		return -ENODEV;
+
+	priv->clk_rate = clk_rate;
+
+	clk_free(&clk);
+
+	return 0;
+}
+
+static void atmel_hlcdc_init(struct udevice *dev)
+{
+	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+	struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+	struct atmel_hlcd_regs *regs = priv->regs;
+	struct display_timing *timing = &priv->timing;
+	struct lcd_dma_desc *desc;
+	unsigned long value, vl_clk_pol;
+
+	/* Disable DISP signal */
+	lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
+	while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
+		udelay(1);
+	/* Disable synchronization */
+	lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
+	while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
+		udelay(1);
+	/* Disable pixel clock */
+	lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
+	while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
+		udelay(1);
+	/* Disable PWM */
+	lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
+	while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
+		udelay(1);
+
+	/* Set pixel clock */
+	value = priv->clk_rate / timing->pixelclock.typ;
+	if (priv->clk_rate % timing->pixelclock.typ)
+		value++;
+
+	vl_clk_pol = 0;
+	if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+		vl_clk_pol = LCDC_LCDCFG0_CLKPOL;
+
+	if (value < 1) {
+		/* Using system clock as pixel clock */
+		lcdc_writel(&regs->lcdc_lcdcfg0,
+			    LCDC_LCDCFG0_CLKDIV(0)
+			    | LCDC_LCDCFG0_CGDISHCR
+			    | LCDC_LCDCFG0_CGDISHEO
+			    | LCDC_LCDCFG0_CGDISOVR1
+			    | LCDC_LCDCFG0_CGDISBASE
+			    | vl_clk_pol
+			    | LCDC_LCDCFG0_CLKSEL);
+
+	} else {
+		lcdc_writel(&regs->lcdc_lcdcfg0,
+			    LCDC_LCDCFG0_CLKDIV(value - 2)
+			    | LCDC_LCDCFG0_CGDISHCR
+			    | LCDC_LCDCFG0_CGDISHEO
+			    | LCDC_LCDCFG0_CGDISOVR1
+			    | LCDC_LCDCFG0_CGDISBASE
+			    | vl_clk_pol);
+	}
+
+	/* Initialize control register 5 */
+	value = 0;
+
+	if (!(timing->flags & DISPLAY_FLAGS_HSYNC_HIGH))
+		value |= LCDC_LCDCFG5_HSPOL;
+	if (!(timing->flags & DISPLAY_FLAGS_VSYNC_HIGH))
+		value |= LCDC_LCDCFG5_VSPOL;
+
+#ifndef LCD_OUTPUT_BPP
+	/* Output is 24bpp */
+	value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+#else
+	switch (LCD_OUTPUT_BPP) {
+	case 12:
+		value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
+		break;
+	case 16:
+		value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
+		break;
+	case 18:
+		value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
+		break;
+	case 24:
+		value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+		break;
+	default:
+		BUG();
+		break;
+	}
+#endif
+
+	value |= LCDC_LCDCFG5_GUARDTIME(priv->guard_time);
+	value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
+	lcdc_writel(&regs->lcdc_lcdcfg5, value);
+
+	/* Vertical & Horizontal Timing */
+	value = LCDC_LCDCFG1_VSPW(timing->vsync_len.typ - 1);
+	value |= LCDC_LCDCFG1_HSPW(timing->hsync_len.typ - 1);
+	lcdc_writel(&regs->lcdc_lcdcfg1, value);
+
+	value = LCDC_LCDCFG2_VBPW(timing->vback_porch.typ);
+	value |= LCDC_LCDCFG2_VFPW(timing->vfront_porch.typ - 1);
+	lcdc_writel(&regs->lcdc_lcdcfg2, value);
+
+	value = LCDC_LCDCFG3_HBPW(timing->hback_porch.typ - 1);
+	value |= LCDC_LCDCFG3_HFPW(timing->hfront_porch.typ - 1);
+	lcdc_writel(&regs->lcdc_lcdcfg3, value);
+
+	/* Display size */
+	value = LCDC_LCDCFG4_RPF(timing->vactive.typ - 1);
+	value |= LCDC_LCDCFG4_PPL(timing->hactive.typ - 1);
+	lcdc_writel(&regs->lcdc_lcdcfg4, value);
+
+	lcdc_writel(&regs->lcdc_basecfg0,
+		    LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
+
+	switch (VNBITS(priv->vl_bpix)) {
+	case 16:
+		lcdc_writel(&regs->lcdc_basecfg1,
+			    LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
+		break;
+	case 32:
+		lcdc_writel(&regs->lcdc_basecfg1,
+			    LCDC_BASECFG1_RGBMODE_24BPP_RGB_888);
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	lcdc_writel(&regs->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
+	lcdc_writel(&regs->lcdc_basecfg3, 0);
+	lcdc_writel(&regs->lcdc_basecfg4, LCDC_BASECFG4_DMA);
+
+	/* Disable all interrupts */
+	lcdc_writel(&regs->lcdc_lcdidr, ~0UL);
+	lcdc_writel(&regs->lcdc_baseidr, ~0UL);
+
+	/* Setup the DMA descriptor, this descriptor will loop to itself */
+	desc = (struct lcd_dma_desc *)(uc_plat->base - 16);
+
+	desc->address = (u32)uc_plat->base;
+
+	/* Disable DMA transfer interrupt & descriptor loaded interrupt. */
+	desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
+			| LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
+	desc->next = (u32)desc;
+
+	/* Flush the DMA descriptor if we enabled dcache */
+	flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc));
+
+	lcdc_writel(&regs->lcdc_baseaddr, desc->address);
+	lcdc_writel(&regs->lcdc_basectrl, desc->control);
+	lcdc_writel(&regs->lcdc_basenext, desc->next);
+	lcdc_writel(&regs->lcdc_basecher,
+		    LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN);
+
+	/* Enable LCD */
+	value = lcdc_readl(&regs->lcdc_lcden);
+	lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
+	while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
+		udelay(1);
+	value = lcdc_readl(&regs->lcdc_lcden);
+	lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
+	while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
+		udelay(1);
+	value = lcdc_readl(&regs->lcdc_lcden);
+	lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
+	while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
+		udelay(1);
+	value = lcdc_readl(&regs->lcdc_lcden);
+	lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
+	while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
+		udelay(1);
+}
+
+static int atmel_hlcdc_probe(struct udevice *dev)
+{
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = at91_hlcdc_enable_clk(dev);
+	if (ret)
+		return ret;
+
+	atmel_hlcdc_init(dev);
+
+	uc_priv->xsize = priv->timing.hactive.typ;
+	uc_priv->ysize = priv->timing.vactive.typ;
+	uc_priv->bpix = priv->vl_bpix;
+
+	/* Enable flushing if we enabled dcache */
+	video_set_flush_dcache(dev, true);
+
+	return 0;
+}
+
+static int atmel_hlcdc_ofdata_to_platdata(struct udevice *dev)
+{
+	struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+	const void *blob = gd->fdt_blob;
+	int node = dev->of_offset;
+
+	priv->regs = (struct atmel_hlcd_regs *)dev_get_addr(dev);
+	if (!priv->regs) {
+		debug("%s: No display controller address\n", __func__);
+		return -EINVAL;
+	}
+
+	if (fdtdec_decode_display_timing(blob, dev->of_offset,
+					 0, &priv->timing)) {
+		debug("%s: Failed to decode display timing\n", __func__);
+		return -EINVAL;
+	}
+
+	if (priv->timing.hactive.typ > LCD_MAX_WIDTH)
+		priv->timing.hactive.typ = LCD_MAX_WIDTH;
+
+	if (priv->timing.vactive.typ > LCD_MAX_HEIGHT)
+		priv->timing.vactive.typ = LCD_MAX_HEIGHT;
+
+	priv->vl_bpix = fdtdec_get_int(blob, node, "atmel,vl-bpix", 0);
+	if (!priv->vl_bpix) {
+		debug("%s: Failed to get bits per pixel\n", __func__);
+		return -EINVAL;
+	}
+
+	priv->guard_time = fdtdec_get_int(blob, node, "atmel,guard-time", 1);
+
+	return 0;
+}
+
+static int atmel_hlcdc_bind(struct udevice *dev)
+{
+	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+
+	uc_plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+				(1 << LCD_MAX_LOG2_BPP) / 8;
+
+	debug("%s: Frame buffer size %x\n", __func__, uc_plat->size);
+
+	return 0;
+}
+
+static const struct udevice_id atmel_hlcdc_ids[] = {
+	{ .compatible = "atmel,sama5d2-hlcdc" },
+	{ }
+};
+
+U_BOOT_DRIVER(atmel_hlcdfb) = {
+	.name	= "atmel_hlcdfb",
+	.id	= UCLASS_VIDEO,
+	.of_match = atmel_hlcdc_ids,
+	.bind	= atmel_hlcdc_bind,
+	.probe	= atmel_hlcdc_probe,
+	.ofdata_to_platdata = atmel_hlcdc_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct atmel_hlcdc_priv),
+};
+
+#endif
-- 
2.11.0



More information about the U-Boot mailing list