[U-Boot] [PATCH 6/8] clk: zynq: Add zynq clock framework driver
Stefan.Herbrechtsmeier at weidmueller.com
Stefan.Herbrechtsmeier at weidmueller.com
Wed Jan 11 08:15:14 CET 2017
> -----Ursprüngliche Nachricht-----
> Von: Michal Simek [mailto:monstr at monstr.eu]
> Gesendet: Dienstag, 10. Januar 2017 15:57
>
> +Soren
>
> On 4.1.2017 13:27, stefan.herbrechtsmeier at weidmueller.com wrote:
> > From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
> >
> > Add a clock framework driver for the zynq platform. The driver is
> > based on the platform zynq clock driver but reworked to use static
> > functions instead of run-time generated objects even for unused
> clocks.
> > Additionally the CONFIG_ZYNQ_PS_CLK_FREQ is replaced by the
> > ps-clk-frequency from the device tree.
> >
> > Signed-off-by: Stefan Herbrechtsmeier
> > <stefan.herbrechtsmeier at weidmueller.com>
> > ---
> >
> > drivers/clk/Kconfig | 7 +
> > drivers/clk/Makefile | 1 +
> > drivers/clk/clk_zynq.c | 470
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 478 insertions(+)
> > create mode 100644 drivers/clk/clk_zynq.c
> >
> > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index
> > c05ce2a..714ccca 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -28,6 +28,13 @@ config CLK_BOSTON
> > help
> > Enable this to support the clocks
> >
> > +config CLK_ZYNQ
> > + bool "Zynq clock driver"
> > + depends on CLK && ARCH_ZYNQ
> > + default y
> > + help
> > + Enable this to support the clocks
> > +
> > source "drivers/clk/tegra/Kconfig"
> > source "drivers/clk/uniphier/Kconfig"
> > source "drivers/clk/exynos/Kconfig"
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > 40a5e8c..5e5b6b1 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -16,3 +16,4 @@ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
> > obj-$(CONFIG_CLK_EXYNOS) += exynos/
> > obj-$(CONFIG_CLK_AT91) += at91/
> > obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
> > +obj-$(CONFIG_CLK_ZYNQ) += clk_zynq.o
> > diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c new file
> > mode 100644 index 0000000..d276155
> > --- /dev/null
> > +++ b/drivers/clk/clk_zynq.c
> > @@ -0,0 +1,470 @@
> > +/*
> > + * Copyright (C) 2017 Weidmüller Interface GmbH & Co. KG
> > + * Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
> > + *
> > + * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann at xilinx.com>
> > + * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <clk-uclass.h>
> > +#include <dm.h>
> > +#include <dm/lists.h>
> > +#include <errno.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/clk.h>
> > +#include <asm/arch/hardware.h>
> > +#include <asm/arch/sys_proto.h>
> > +
> > +/* Register bitfield defines */
> > +#define PLLCTRL_FBDIV_MASK 0x7f000
> > +#define PLLCTRL_FBDIV_SHIFT 12
> > +#define PLLCTRL_BPFORCE_MASK (1 << 4)
> > +#define PLLCTRL_PWRDWN_MASK 2
> > +#define PLLCTRL_PWRDWN_SHIFT 1
> > +#define PLLCTRL_RESET_MASK 1
> > +#define PLLCTRL_RESET_SHIFT 0
> > +
> > +#define ZYNQ_CLK_MAXDIV 0x3f
> > +#define CLK_CTRL_DIV1_SHIFT 20
> > +#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
> > +#define CLK_CTRL_DIV0_SHIFT 8
> > +#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
> > +#define CLK_CTRL_SRCSEL_SHIFT 4
> > +#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT)
> > +
> > +#define CLK_CTRL_DIV2X_SHIFT 26
> > +#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV <<
> CLK_CTRL_DIV2X_SHIFT)
> > +#define CLK_CTRL_DIV3X_SHIFT 20
> > +#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV <<
> CLK_CTRL_DIV3X_SHIFT)
> > +
> > +#define ZYNQ_CLKMUX_SEL_0 0
> > +#define ZYNQ_CLKMUX_SEL_1 1
> > +#define ZYNQ_CLKMUX_SEL_2 2
> > +#define ZYNQ_CLKMUX_SEL_3 3
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +enum zynq_clk_rclk {mio_clk, emio_clk}; #endif
> > +
> > +struct zynq_clk_priv {
> > + ulong ps_clk_freq;
> > +};
> > +
> > +static void *zynq_clk_get_register(enum zynq_clk id) {
> > + switch (id) {
> > + case armpll_clk:
> > + return &slcr_base->arm_pll_ctrl;
> > + case ddrpll_clk:
> > + return &slcr_base->ddr_pll_ctrl;
> > + case iopll_clk:
> > + return &slcr_base->io_pll_ctrl;
> > +#ifndef CONFIG_SPL_BUILD
> > + case dci_clk:
> > + return &slcr_base->dci_clk_ctrl;
> > +#endif
> > + case lqspi_clk:
> > + return &slcr_base->lqspi_clk_ctrl;
> > + case smc_clk:
> > + return &slcr_base->smc_clk_ctrl;
> > + case pcap_clk:
> > + return &slcr_base->pcap_clk_ctrl;
> > +#ifndef CONFIG_SPL_BUILD
> > + case gem0_clk:
> > + return &slcr_base->gem0_clk_ctrl;
> > + case gem1_clk:
> > + return &slcr_base->gem1_clk_ctrl;
> > + case fclk0_clk:
> > + return &slcr_base->fpga0_clk_ctrl;
> > + case fclk1_clk:
> > + return &slcr_base->fpga1_clk_ctrl;
> > + case fclk2_clk:
> > + return &slcr_base->fpga2_clk_ctrl;
> > + case fclk3_clk:
> > + return &slcr_base->fpga3_clk_ctrl;
> > + case can0_clk ... can1_clk:
> > + return &slcr_base->can_clk_ctrl;
> > +#endif
> > + case sdio0_clk:
> > + case sdio1_clk:
> > + return &slcr_base->sdio_clk_ctrl;
> > + case uart0_clk:
> > + case uart1_clk:
> > + return &slcr_base->uart_clk_ctrl;
> > + case spi0_clk:
> > + case spi1_clk:
> > + return &slcr_base->spi_clk_ctrl;
> > +#ifndef CONFIG_SPL_BUILD
> > + case dbg_trc_clk:
> > + case dbg_apb_clk:
> > + return &slcr_base->dbg_clk_ctrl;
> > +#endif
>
> Please put them together.
Do you mean the ifndef or the default?
> > + default:
> > + return &slcr_base->dbg_clk_ctrl;
> > + }
> > +}
> > +
> > +static enum zynq_clk zynq_clk_get_cpu_pll(u32 clk_ctrl) {
> > + u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
> > +CLK_CTRL_SRCSEL_SHIFT;
> > +
> > + switch (srcsel) {
> > + case ZYNQ_CLKMUX_SEL_0:
> > + case ZYNQ_CLKMUX_SEL_1:
> > + return armpll_clk;
> > + case ZYNQ_CLKMUX_SEL_2:
> > + return ddrpll_clk;
> > + case ZYNQ_CLKMUX_SEL_3:
> > + return iopll_clk;
> > + default:
> > + return armpll_clk;
>
>
> Default case shouldn't happen because of mask above.
> But if you want to keep it maybe this is a little bit better.
>
> case ZYNQ_CLKMUX_SEL_2:
> return ddrpll_clk;
> case ZYNQ_CLKMUX_SEL_3:
> return iopll_clk;
> case ZYNQ_CLKMUX_SEL_0:
> case ZYNQ_CLKMUX_SEL_1:
> default:
> return armpll_clk;
Okay. Is it okay if I replace the defines with the plain numbers?
> > + }
> > +}
> > +
> > +static enum zynq_clk zynq_clk_get_peripheral_pll(u32 clk_ctrl) {
> > + u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
> > +CLK_CTRL_SRCSEL_SHIFT;
> > +
> > + switch (srcsel) {
> > + case ZYNQ_CLKMUX_SEL_0:
> > + case ZYNQ_CLKMUX_SEL_1:
> > + return iopll_clk;
> > + case ZYNQ_CLKMUX_SEL_2:
> > + return armpll_clk;
> > + case ZYNQ_CLKMUX_SEL_3:
> > + return ddrpll_clk;
> > + default:
> > + return iopll_clk;
>
> ditto.
Okay
> > + }
> > +}
> > +
> > +static ulong zynq_clk_get_pll_rate(struct zynq_clk_priv *priv, enum
> > +zynq_clk id) {
> > + u32 clk_ctrl, reset, pwrdwn, mul, bypass;
> > +
> > + clk_ctrl = readl(zynq_clk_get_register(id));
> > +
> > + reset = (clk_ctrl & PLLCTRL_RESET_MASK) >> PLLCTRL_RESET_SHIFT;
> > + pwrdwn = (clk_ctrl & PLLCTRL_PWRDWN_MASK) >>
> PLLCTRL_PWRDWN_SHIFT;
> > + if (reset || pwrdwn)
> > + return 0;
> > +
> > + bypass = clk_ctrl & PLLCTRL_BPFORCE_MASK;
> > + if (bypass)
> > + mul = 1;
> > + else
> > + mul = (clk_ctrl & PLLCTRL_FBDIV_MASK) >>
> PLLCTRL_FBDIV_SHIFT;
> > +
> > + return priv->ps_clk_freq * mul;
> > +}
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id) {
> > + u32 clk_ctrl, srcsel;
> > +
> > + if (id == gem0_clk)
> > + clk_ctrl = readl(&slcr_base->gem0_rclk_ctrl);
> > + else
> > + clk_ctrl = readl(&slcr_base->gem1_rclk_ctrl);
> > +
> > + srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >>
> CLK_CTRL_SRCSEL_SHIFT;
> > + if (srcsel)
> > + return emio_clk;
> > + else
> > + return mio_clk;
> > +}
> > +#endif
> > +
> > +static ulong zynq_clk_get_cpu_rate(struct zynq_clk_priv *priv, enum
> > +zynq_clk id) {
> > + u32 clk_621, clk_ctrl, div;
> > + enum zynq_clk pll;
> > +
> > + clk_ctrl = readl(&slcr_base->arm_clk_ctrl);
> > +
> > + div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
> > +
> > + switch (id) {
> > + case cpu_1x_clk:
> > + div *= 2;
> > + /* fall through */
> > + case cpu_2x_clk:
> > + clk_621 = readl(&slcr_base->clk_621_true) & 1;
> > + div *= 2 + clk_621;
> > + break;
> > + case cpu_3or2x_clk:
> > + div *= 2;
> > + /* fall through */
> > + case cpu_6or4x_clk:
> > + break;
> > + default:
> > + return 0;
> > + }
> > +
> > + pll = zynq_clk_get_cpu_pll(clk_ctrl);
> > +
> > + return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div);
> }
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv) {
> > + u32 clk_ctrl, div;
> > +
> > + clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
> > +
> > + div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
> > +
> > + return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk),
> > +div); } #endif
> > +
> > +static ulong zynq_clk_get_ddr3x_rate(struct zynq_clk_priv *priv) {
> > + u32 clk_ctrl, div;
> > +
> > + clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
> > +
> > + div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
> > +
> > + return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk),
> > +div); }
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv) {
> > + u32 clk_ctrl, div0, div1;
> > +
> > + clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
> > +
> > + div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
> > + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
> > +
> > + return DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(
> > + zynq_clk_get_pll_rate(priv, ddrpll_clk), div0), div1); }
> #endif
> > +
> > +static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv
> *priv,
> > + enum zynq_clk id, bool two_divs) {
> > + enum zynq_clk pll;
> > + u32 clk_ctrl, div0;
> > + u32 div1 = 1;
> > +
> > + clk_ctrl = readl(zynq_clk_get_register(id));
> > +
> > + div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
> > + if (!div0)
> > + div0 = 1;
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > + if (two_divs) {
> > + div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >>
> CLK_CTRL_DIV1_SHIFT;
> > + if (!div1)
> > + div1 = 1;
> > + }
> > +#endif
> > +
> > + pll = zynq_clk_get_peripheral_pll(clk_ctrl);
> > +
> > + return
> > + DIV_ROUND_CLOSEST(
> > + DIV_ROUND_CLOSEST(
> > + zynq_clk_get_pll_rate(priv, pll), div0),
> > + div1);
> > +}
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum
> > +zynq_clk id) {
> > + if (zynq_clk_get_gem_rclk(id) == mio_clk)
> > + return zynq_clk_get_peripheral_rate(priv, id, true);
> > +
>
> Not sure if my understanding is correct here but I would expect if
> input is via emio that you will ask someone else to provide this value.
As you realised I add this function in a later patch. Should I merge the patches?
> Returning 0 without message seems to me not enough.
I will add a message. Should I also return a error code like ENODEV?
> > + return 0;
> > +}
> > +
> > +static unsigned long zynq_clk_calc_peripheral_two_divs(
> incorrect parameter indetation
>
>
> > + ulong rate, ulong pll_rate, u32 *div0,
> > + u32 *div1)
>
> > +{
> > + long new_err, best_err = (long)(~0UL >> 1);
> > + ulong new_rate, best_rate = 0;
> > + u32 d0, d1;
> > +
> > + for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
> > + for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
> > + new_rate = DIV_ROUND_CLOSEST(
> > + DIV_ROUND_CLOSEST(pll_rate, d0), d1);
> > + new_err = abs(new_rate - rate);
> > +
> > + if (new_err < best_err) {
> > + *div0 = d0;
> > + *div1 = d1;
> > + best_err = new_err;
> > + best_rate = new_rate;
> > + }
> > + }
> > + }
> > +
> > + return best_rate;
> > +}
> > +
> > +static ulong zynq_clk_set_peripheral_rate(struct zynq_clk_priv
> *priv,
> > + enum zynq_clk id, ulong rate,
> > + bool two_divs)
> > +{
> > + enum zynq_clk pll;
> > + u32 clk_ctrl, div0 = 0, div1 = 0;
> > + ulong pll_rate, new_rate;
> > + u32 *reg;
> > +
> > + reg = zynq_clk_get_register(id);
> > + clk_ctrl = readl(reg);
> > +
> > + pll = zynq_clk_get_peripheral_pll(clk_ctrl);
> > + pll_rate = zynq_clk_get_pll_rate(priv, pll);
> > + clk_ctrl &= ~CLK_CTRL_DIV0_MASK;
> > + if (two_divs) {
> > + clk_ctrl &= ~CLK_CTRL_DIV1_MASK;
> > + new_rate = zynq_clk_calc_peripheral_two_divs(rate,
> pll_rate,
> > + &div0, &div1);
> > + clk_ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
> > + } else {
> > + div0 = DIV_ROUND_CLOSEST(pll_rate, rate);
> > + if (div0 > ZYNQ_CLK_MAXDIV)
> > + div0 = ZYNQ_CLK_MAXDIV;
> > + new_rate = DIV_ROUND_CLOSEST(rate, div0);
> > + }
> > + clk_ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
> > +
> > + zynq_slcr_unlock();
> > + writel(clk_ctrl, reg);
> > + zynq_slcr_lock();
> > +
> > + return new_rate;
> > +}
> > +
> > +static ulong zynq_clk_set_gem_rate(struct zynq_clk_priv *priv, enum
> zynq_clk id,
> > + ulong rate)
> > +{
> > + if (zynq_clk_get_gem_rclk(id) == mio_clk)
> > + return zynq_clk_set_peripheral_rate(priv, id, rate, true);
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +#ifndef CONFIG_SPL_BUILD
> > +static ulong zynq_clk_get_rate(struct clk *clk) {
> > + struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
> > + enum zynq_clk id = clk->id;
> > + bool two_divs = false;
> > +
> > + switch (id) {
> > + case armpll_clk ... iopll_clk:
> > + return zynq_clk_get_pll_rate(priv, id);
> > + case cpu_6or4x_clk ... cpu_1x_clk:
> > + return zynq_clk_get_cpu_rate(priv, id);
> > + case ddr2x_clk:
> > + return zynq_clk_get_ddr2x_rate(priv);
> > + case ddr3x_clk:
> > + return zynq_clk_get_ddr3x_rate(priv);
> > + case dci_clk:
> > + return zynq_clk_get_dci_rate(priv);
> > + case gem0_clk ... gem1_clk:
> > + return zynq_clk_get_gem_rate(priv, id);
> > + case fclk0_clk ... can1_clk:
> > + two_divs = true;
> > + /* fall through */
> > + case dbg_trc_clk ... dbg_apb_clk:
> > + case lqspi_clk ... pcap_clk:
> > + case sdio0_clk ... spi1_clk:
> > + return zynq_clk_get_peripheral_rate(priv, id, two_divs);
> > + case dma_clk:
> > + return zynq_clk_get_cpu_rate(priv, cpu_2x_clk);
> > + case usb0_aper_clk ... smc_aper_clk:
> > + return zynq_clk_get_cpu_rate(priv, cpu_1x_clk);
> > + default:
> > + return -ENXIO;
> > + }
> > +}
> > +
> > +static ulong zynq_clk_set_rate(struct clk *clk, ulong rate) {
> > + struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
> > + enum zynq_clk id = clk->id;
> > + bool two_divs = false;
> > +
> > + switch (id) {
> > + case gem0_clk ... gem1_clk:
> > + return zynq_clk_set_gem_rate(priv, id, rate);
> > + case fclk0_clk ... can1_clk:
> > + two_divs = true;
> > + /* fall through */
> > + case lqspi_clk ... pcap_clk:
> > + case sdio0_clk ... spi1_clk:
> > + case dbg_trc_clk ... dbg_apb_clk:
> > + return zynq_clk_set_peripheral_rate(priv, id, rate,
> two_divs);
> > + default:
> > + return -ENXIO;
> > + }
> > +}
> > +#else
> > +static ulong zynq_clk_get_rate(struct clk *clk) {
> > + struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
> > + enum zynq_clk id = clk->id;
> > +
> > + switch (id) {
> > + case cpu_6or4x_clk ... cpu_1x_clk:
> > + return zynq_clk_get_cpu_rate(priv, id);
> > + case ddr3x_clk:
> > + return zynq_clk_get_ddr3x_rate(priv);
> > + case lqspi_clk ... pcap_clk:
> > + case sdio0_clk ... spi1_clk:
> > + return zynq_clk_get_peripheral_rate(priv, id, 0);
> > + default:
> > + return -ENXIO;
> > + }
> > +}
> > +#endif
> > +
> > +static struct clk_ops zynq_clk_ops = {
> > + .get_rate = zynq_clk_get_rate,
> > +#ifndef CONFIG_SPL_BUILD
> > + .set_rate = zynq_clk_set_rate,
> > +#endif
> > +};
> > +
> > +static int zynq_clk_probe(struct udevice *dev) {
> > + struct zynq_clk_priv *priv = dev_get_priv(dev);
> > +
> > + priv->ps_clk_freq = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
> > + "ps-clk-frequency", 33333333UL);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct udevice_id zynq_clk_ids[] = {
> > + { .compatible = "xlnx,ps7-clkc"},
> > + {}
> > +};
> > +
> > +U_BOOT_DRIVER(zynq_clk) = {
> > + .name = "zynq_clk",
> > + .id = UCLASS_CLK,
> > + .of_match = zynq_clk_ids,
> > + .flags = DM_FLAG_PRE_RELOC,
> > + .ops = &zynq_clk_ops,
> > + .priv_auto_alloc_size = sizeof(struct zynq_clk_priv),
> > + .probe = zynq_clk_probe,
> > +};
> >
>
> The rest looks good.
> Soren: Can you please look at it? IIRC you have written that origin
> driver.
Regards,
Stefan
Kommanditgesellschaft - Sitz: Detmold - Amtsgericht Lemgo HRA 2790 -
Komplementärin: Weidmüller Interface Führungsgesellschaft mbH -
Sitz: Detmold - Amtsgericht Lemgo HRB 3924;
Geschäftsführer: José Carlos Álvarez Tobar, Elke Eckstein, Dr. Peter Köhler, Jörg Timmermann;
USt-ID-Nr. DE124599660
More information about the U-Boot
mailing list