[U-Boot] [PATCH] serial, ns16550: bugfix: ns16550 fifo not enabled

Adam Ford aford173 at gmail.com
Wed Jan 11 15:44:35 CET 2017


On Tue, Jan 10, 2017 at 1:08 AM, Heiko Schocher <hs at denx.de> wrote:
> commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
> breaks u-boot commandline working with long commands
> sending to the board.
>
> Since the above patch, you have to setup the fcr register.
>
> For board/archs which enable OF_PLATDATA, the new field
> fcr in struct ns16550_platdata is not filled with a
> default value ...
>
> This leads in not setting up the uarts fifo, which ends
> in problems, when you send long commands to u-boots
> commandline.
>
> Detected this issue with automated tbot tests on am335x
> based shc board.
>
> The error does not popup, if you type commands. You need
> to copy&paste a long command to u-boots commandshell
> (or send a long command with tbot)
>
> Possible boards/plattforms with problems:
> ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> ./arch/arm/mach-tegra/board.c
> ./board/isee/igep00x0/igep00x0.c
> ./board/overo/overo.c
> ./board/quipos/cairo/cairo.c
> ./board/logicpd/omap3som/omap3logic.c
> ./board/logicpd/zoom1/zoom1.c
> ./board/timll/devkit8000/devkit8000.c
> ./board/lg/sniper/sniper.c
> ./board/ti/beagle/beagle.c
> ./drivers/serial/serial_rockchip.c
>
> This patch fixes only:
> ./arch/arm/mach-omap2/am33xx/board.c
>
> Signed-off-by: Heiko Schocher <hs at denx.de>

The omap3logic is also affected.  It also appears as if you hold a
character down while booting, it may hang the system. I applied a
similar patch to omap3logic.c and it went away.

Thanks for catching that!

adam
> --
> 2.7.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


More information about the U-Boot mailing list