[U-Boot] [PATCH 00/12] sunxi: Allwinner H5 and OrangePi PC2 support
Icenowy Zheng
icenowy at aosc.xyz
Fri Jan 13 05:39:34 CET 2017
13.01.2017, 09:34, "Andre Przywara" <andre.przywara at arm.com>:
> This series introduces support for the Allwinner H5 SoC with four
> Cortex-A53 cores. The SoC's peripherals are very similar to the H3,
> although the cores and the BROM/SRAM layout resembles the A64.
> The first 6 patches contain some fixes and refactoring, to make code
> sharing between the three mentioned SoCs easier.
> Patch 07/12 adds support for the H5 DRAM controller, by extending
> the already existing combined H3/A64 DRAM code.
> Patch 08/12 renames the existing CONFIG_MACH_SUN8I_H3 config symbol to
> let it be used by all peripheral code that can be shared between the
> H3 and H5. Patch 10/12 introduces the H5 SoC config option into Kconfig,
> which defines this shared symbol as well.
> Patch 11/12 adds an easy device tree, which actually uses the H3 .dtsi
> and overwrites nodes which are different. This is good enough for U-Boot,
> the DT will be changed anyway once we get the DT merged into the Linux
> kernel.
> The final patch then adds the defconfig for the OrangePi PC2 board.
> Since this board comes with soldered SPI flash, we enable support for
> it in the SPL. This has been tested by writing the SPI flash with some
> special sunxi-fel version. The BROM loaded and executed the SPL, which
> in turn loaded and executed U-Boot proper. Both parts are 64-bit only
> for now.
> Ethernet support is enabled, but fails at the moment since the EMAC
> driver does not support setting a GPIO to enable the external Gigabit PHY.
> This should be a problem for H3 boards with Gigabit as well.
>
> At the moment this build suffers from the same problem as the A64: the
> ATF is missing, so Linux won't boot easily. However I finally managed to
> clean up the FIT extension series, which solves this problem in a quite
> elegant way. I will post this series after getting some sleep ;-)
>
> This series is on top of sunxi/next, which has three yet unmerged (and
> unrelated) patches compared to HEAD. So it should apply to both branches.
>
> Some of these patches will probably conflict with ongoing work from
> Icenowy, I am happy to rebase on any branch someone points me to.
No. It's me who should do rebase, as I have not done everything ;-)
>
> Please have a look and let me know your opinion!
>
> Cheers,
> Andre.
>
> Andre Przywara (12):
> sunxi: fix ACTLR.SMP assembly routine
> sunxi: simplify ACTLR.SMP bit set #ifdef
> sunxi: configs: merge sun9i and sun50i SPL memory definitions
> sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
> sunxi: provide ARMv8 mem_map for every ARM64 board
> SPI: SPL: sunxi: fix 64-bit build
> sunxi: DRAM: add Allwinner H5 support
> sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
> sunxi: H5: add COUNTER_FREQUENCY
> sunxi: introduce Allwinner H5 config option
> sunxi: dts: add basic OrangePi PC 2 device tree file
> sunxi: configs: add basic OrangePi PC 2 defconfig
>
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 147 ++++++++++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 4 +-
> arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
> arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 +-
> arch/arm/include/asm/arch-sunxi/dram.h | 2 +-
> arch/arm/include/asm/arch-sunxi/spl.h | 2 +-
> arch/arm/mach-sunxi/Makefile | 2 +-
> arch/arm/mach-sunxi/board.c | 21 ++--
> arch/arm/mach-sunxi/clock_sun6i.c | 6 +-
> arch/arm/mach-sunxi/cpu_info.c | 2 +
> arch/arm/mach-sunxi/dram_sun8i_h3.c | 97 ++++++++++++++---
> arch/arm/mach-sunxi/usb_phy.c | 4 +-
> board/sunxi/Kconfig | 36 ++++++-
> board/sunxi/MAINTAINERS | 5 +
> configs/orangepi_pc2_defconfig | 16 +++
> drivers/mtd/spi/Kconfig | 2 +-
> drivers/mtd/spi/sunxi_spi_spl.c | 16 +--
> drivers/net/sun8i_emac.c | 2 +-
> drivers/power/Kconfig | 4 +-
> drivers/usb/host/ehci-sunxi.c | 2 +-
> include/configs/sun8i.h | 2 +
> include/configs/sunxi-common.h | 22 ++--
> 23 files changed, 330 insertions(+), 71 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-h5-orangepi-pc2.dts
> create mode 100644 configs/orangepi_pc2_defconfig
>
> --
> 2.8.2
More information about the U-Boot
mailing list