[U-Boot] [linux-sunxi] [PATCH 1/2] sunxi: dts: OrangePi Zero: add Ethernet node

[jonsmirl at gmail.com]

Can you simultaneously use both Ethernet interfaces on the A64? I've
received conflicting answers to this question.

On Fri, Jan 13, 2017 at 9:06 PM, Andre Przywara <andre.przywara at arm.com> wrote:
> The OrangePi Zero can happily use the EMAC along with its integrated
> PHY to use Ethernet (for TFTP booting, for instance).
> Add the emac node to the board .dts by copying it from the OrangePi One
> DT.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
> index 0989434..20d489c 100644
> --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
> +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
> @@ -99,6 +99,17 @@
>         status = "okay";
>  };
>
> +&emac {
> +       phy = <&phy1>;
> +       phy-mode = "mii";
> +       allwinner,use-internal-phy;
> +       allwinner,leds-active-low;
> +       status = "okay";
> +       phy1: ethernet-phy at 1 {
> +               reg = <1>;
> +       };
> +};
> +
>  &mmc0 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&mmc0_pins_a>;
> --
> 2.8.2
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.



-- 
Jon Smirl
jonsmirl at gmail.com