[U-Boot] [PATCH v2] board/t1024rdb: enable board-level reset when issuing reset command

[york sun]

On 01/11/2017 09:39 PM, Shengzhou Liu wrote:
> As board-specific reset logic, it needs to issue reset signal
> via CPLD when issuing 'reset' command in u-boot, this patch
> solves the issue of reset command not working on T1024RDB.
>
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
> ---
> v2: add build condition.
>
>  board/freescale/t102xrdb/t102xrdb.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
> index 01dbf38..0f453a7 100644
> --- a/board/freescale/t102xrdb/t102xrdb.c
> +++ b/board/freescale/t102xrdb/t102xrdb.c
> @@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void)
>  	return CONFIG_DDR_CLK_FREQ;
>  }
>
> +#ifdef CONFIG_T1024RDB

Shengzhou

This macro is no longer used. Please use CONFIG_TARGET_T1024RDB instead.

York