[U-Boot] [PATCH 09/12] aspeed/ast2500: Common board init functions for ast2500 based boards
Maxim Sloyko
maxims at google.com
Tue Jan 17 21:17:01 CET 2017
On Sat, Jan 14, 2017 at 9:14 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Maxim,
>
> On 4 January 2017 at 12:46, Maxim Sloyko <maxims at google.com> wrote:
> > Signed-off-by: Maxim Sloyko <maxims at google.com>
> > ---
> >
> > arch/arm/mach-aspeed/Makefile | 2 +-
> > arch/arm/mach-aspeed/ast2500-board.c | 74
> ++++++++++++++++++++++++++++++++++++
> > 2 files changed, 75 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/mach-aspeed/ast2500-board.c
> >
> > diff --git a/arch/arm/mach-aspeed/Makefile b/arch/arm/mach-aspeed/
> Makefile
> > index 1f7af71b03..9d29ff7f6f 100644
> > --- a/arch/arm/mach-aspeed/Makefile
> > +++ b/arch/arm/mach-aspeed/Makefile
> > @@ -5,4 +5,4 @@
> > #
> >
> > obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
> > -obj-$(CONFIG_ASPEED_AST2500) += ast2500/
> > +obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o
> > diff --git a/arch/arm/mach-aspeed/ast2500-board.c
> b/arch/arm/mach-aspeed/ast2500-board.c
> > new file mode 100644
> > index 0000000000..5b2b0ce132
> > --- /dev/null
> > +++ b/arch/arm/mach-aspeed/ast2500-board.c
> > @@ -0,0 +1,74 @@
> > +#include <common.h>
> > +#include <asm/arch/timer.h>
> > +#include <asm/arch/wdt.h>
> > +#include <asm/io.h>
> > +#include <dm.h>
> > +#include <dm/uclass.h>
> > +#include <linux/err.h>
> > +#include <ram.h>
> > +#include <timer.h>
>
> Check include file order.
>
> > +
> > +/* Second Watchdog Timer by default is configured
>
> /*
> * Second watchdog...
> * ...
> */
>
> Please check globally. Try to use more columns if you can.
>
> > + * to trigger secondary boot source.
> > + */
> > +#define AST_2ND_BOOT_WDT (1)
>
> Remove () around simple constants.
>
> > +
> > +/* Third Watchdog Timer by default is configured
> > + * to toggle Flash address mode switch before reset.
> > + */
> > +#define AST_FLASH_ADDR_DETECT_WDT (2)
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +void lowlevel_init(void)
> > +{
> > + /*
> > + * These two watchdogs need to be stopped as soon as possible,
> > + * otherwise the board might hang. By default they are set to
> > + * a very short timeout and even simple debug write to serial
> > + * console early in the init process might cause them to fire.
> > + */
> > + struct ast_wdt *flash_addr_wdt =
> > + (struct ast_wdt *)(WDT_BASE +
> > + sizeof(struct ast_wdt) *
> > + AST_FLASH_ADDR_DETECT_WDT);
> > +
> > + clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
> > +
> > +#ifndef CONFIG_FIRMWARE_2ND_BOOT
> > + struct ast_wdt *sec_boot_wdt =
> > + (struct ast_wdt *)(WDT_BASE +
> > + sizeof(struct ast_wdt) *
> > + AST_2ND_BOOT_WDT);
> > +
> > + clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
> > +#endif
>
> Seems this should call a helper function in ast_wdt.c or similar.
>
I can't call wdt_stop() here, because that would require stack, which is
not yet available in lowlevel_init.
Other comments will be addressed for v4.
>
> > +}
> > +
> > +int board_init(void)
> > +{
> > + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>
> blank line
>
> > + return 0;
> > +}
> > +
> > +int dram_init(void)
> > +{
> > + struct udevice *dev;
> > + int ret = uclass_get_device(UCLASS_RAM, 0, &dev);
>
> blank line, and better to separate decl and code in this case, since
> you check it below.
>
> > + if (ret) {
> > + debug("DRAM FAIL1\r\n");
> > + return ret;
> > + }
> > +
> > + struct ram_info ram;
>
> move to top of function
>
> > + ret = ram_get_info(dev, &ram);
> > + if (ret) {
> > + debug("DRAM FAIL2\r\n");
> > + return ret;
> > + }
> > +
>
> drop extra blank line
>
> > +
> > + gd->ram_size = ram.size;
>
> blank line
>
> > + return 0;
> > +}
> > +
> > --
> > 2.11.0.390.gc69c2f50cf-goog
> >
>
> REgards,
> Simon
>
--
*M*axim *S*loyko
More information about the U-Boot
mailing list