[U-Boot] [RFC PATCH 3/3] spl: add support to booting with ATF
Kever Yang
kever.yang at rock-chips.com
Wed Jan 18 13:20:07 CET 2017
Hi
Who is suppose to maintain source in "common/spl"?
I hope to get more comments before my first version patch without 'RFC'
and with suggestion from Michal.
Thanks,
- Kever
On 12/29/2016 06:25 PM, Kever Yang wrote:
> ATF(ARM Trust Firmware) is used by ARM arch64 SoCs, find more infomation
> about ATF at:
>
> SPL is consider as BL2 in ATF, it needs to load other part of ATF binary
> like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to prepare the
> parameter for BL31 which including entry and image information for all
> other images. Then the SPL handle PC to BL31 with the parameter, the
> BL31 will do the rest of work and at last get into U-Boot(BL33).
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
> common/spl/Kconfig | 14 +++
> common/spl/Makefile | 1 +
> common/spl/spl.c | 4 +
> common/spl/spl_atf.c | 91 ++++++++++++++++
> include/atf_common.h | 295 +++++++++++++++++++++++++++++++++++++++++++++++++++
> include/spl.h | 1 +
> 6 files changed, 406 insertions(+)
> create mode 100644 common/spl/spl_atf.c
> create mode 100644 include/atf_common.h
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index cba51f5..1bb4360 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -577,6 +577,20 @@ config SPL_YMODEM_SUPPORT
> means of transmitting U-Boot over a serial line for using in SPL,
> with a checksum to ensure correctness.
>
> +config SPL_ATF_SUPPORT
> + bool "Support ARM trust firmware"
> + depends on SPL
> + help
> + ATF(ARM Trust Firmware) is component for ARM arch64 which need to
> + load by SPL(consider as BL2 in ATF).
> + More detail at: https://github.com/ARM-software/arm-trusted-firmware
> +
> +config SPL_ATF_TEXT_BASE
> + depends on SPL_ATF_SUPPORT
> + hex "ATF TEXT BASE addr"
> + help
> + This is the base address in memory for ATF text and entry point.
> +
> config TPL_ENV_SUPPORT
> bool "Support an environment"
> depends on TPL
> diff --git a/common/spl/Makefile b/common/spl/Makefile
> index ed02635..620ae90 100644
> --- a/common/spl/Makefile
> +++ b/common/spl/Makefile
> @@ -20,6 +20,7 @@ endif
> obj-$(CONFIG_SPL_UBI) += spl_ubi.o
> obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
> obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
> +obj-$(CONFIG_SPL_ATF_SUPPORT) += spl_atf.o
> obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
> obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
> obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index 1729034..7daf7bd 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -390,6 +390,10 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
> gd->malloc_ptr / 1024);
> #endif
>
> +#ifdef CONFIG_SPL_ATF_SUPPORT
> + bl31_entry();
> +#endif
> +
> debug("loaded - jumping to U-Boot...");
> spl_board_prepare_for_boot();
> jump_to_image_no_args(&spl_image);
> diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c
> new file mode 100644
> index 0000000..cf23b7a
> --- /dev/null
> +++ b/common/spl/spl_atf.c
> @@ -0,0 +1,91 @@
> +/*
> + * Copyright (C) 2016 Rockchip Electronic Co.,Ltd
> + * Written by Kever Yang <kever.yang at rock-chips.com>
> + *
> + * origin from arm-trust-firmware
> + * plat/arm/common/arm_bl2_setup.c
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <spl.h>
> +#include <atf_common.h>
> +
> +static struct bl2_to_bl31_params_mem_t bl31_params_mem;
> +static struct bl31_params_t *bl2_to_bl31_params;
> +
> +/*******************************************************************************
> + * This function assigns a pointer to the memory that the platform has kept
> + * aside to pass platform specific and trusted firmware related information
> + * to BL31. This memory is allocated by allocating memory to
> + * bl2_to_bl31_params_mem_t structure which is a superset of all the
> + * structure whose information is passed to BL31
> + * NOTE: This function should be called only once and should be done
> + * before generating params to BL31
> + ******************************************************************************/
> +struct bl31_params_t *bl2_plat_get_bl31_params(void)
> +{
> + struct entry_point_info_t *bl33_ep_info;
> +
> + /*
> + * Initialise the memory for all the arguments that needs to
> + * be passed to BL31
> + */
> + memset(&bl31_params_mem, 0, sizeof(struct bl2_to_bl31_params_mem_t));
> +
> + /* Assign memory for TF related information */
> + bl2_to_bl31_params = &bl31_params_mem.bl31_params;
> + SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
> +
> + /* Fill BL31 related information */
> + SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
> + VERSION_1, 0);
> +
> + /* Fill BL32 related information if it exists */
> +#ifdef BL32_BASE
> + bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
> + SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
> + VERSION_1, 0);
> + bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
> + SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
> + VERSION_1, 0);
> +#endif /* BL32_BASE */
> +
> + /* Fill BL33 related information */
> + bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
> + bl33_ep_info = &bl31_params_mem.bl33_ep_info;
> + SET_PARAM_HEAD(bl33_ep_info, PARAM_EP, VERSION_1, EP_NON_SECURE);
> +
> + /* BL33 expects to receive the primary CPU MPID (through x0) */
> + bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
> + bl33_ep_info->pc = CONFIG_SYS_TEXT_BASE;
> + bl33_ep_info->spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
> + DISABLE_ALL_EXECPTIONS);
> +
> + bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
> + SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
> + VERSION_1, 0);
> +
> +
> + return bl2_to_bl31_params;
> +}
> +
> +void raw_write_daif(uint32_t daif)
> +{
> + __asm__ __volatile__("msr DAIF, %0\n\t" : : "r" (daif) : "memory");
> +}
> +
> +void bl31_entry(void)
> +{
> + struct bl31_params_t *bl31_params;
> + void (*entry)(struct bl31_params_t *params, void *plat_params) = NULL;
> +
> + bl31_params = bl2_plat_get_bl31_params();
> + entry = (void *)CONFIG_SPL_ATF_TEXT_BASE;
> +
> + raw_write_daif(SPSR_EXCEPTION_MASK);
> + dcache_disable();
> +
> + entry(bl31_params, NULL);
> +}
> diff --git a/include/atf_common.h b/include/atf_common.h
> new file mode 100644
> index 0000000..8351302
> --- /dev/null
> +++ b/include/atf_common.h
> @@ -0,0 +1,295 @@
> +/*
> + * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *
> + * Redistributions of source code must retain the above copyright notice, this
> + * list of conditions and the following disclaimer.
> + *
> + * Redistributions in binary form must reproduce the above copyright notice,
> + * this list of conditions and the following disclaimer in the documentation
> + * and/or other materials provided with the distribution.
> + *
> + * Neither the name of ARM nor the names of its contributors may be used
> + * to endorse or promote products derived from this software without specific
> + * prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> + * POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef __BL_COMMON_H__
> +#define __BL_COMMON_H__
> +
> +#define SECURE 0x0
> +#define NON_SECURE 0x1
> +#define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE))
> +
> +#define UP 1
> +#define DOWN 0
> +
> +/*******************************************************************************
> + * Constants to identify the location of a memory region in a given memory
> + * layout.
> +******************************************************************************/
> +#define TOP 0x1
> +#define BOTTOM !TOP
> +
> +/*******************************************************************************
> + * Constants that allow assembler code to access members of and the
> + * 'entry_point_info' structure at their correct offsets.
> + ******************************************************************************/
> +#define ENTRY_POINT_INFO_PC_OFFSET 0x08
> +#define ENTRY_POINT_INFO_ARGS_OFFSET 0x18
> +
> +/* The following are used to set/get image attributes. */
> +#define PARAM_EP_SECURITY_MASK (0x1)
> +
> +#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
> +#define SET_SECURITY_STATE(x, security) \
> + ((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
> +
> +
> +/*
> + * The following are used for image state attributes.
> + * Image can only be in one of the following state.
> + */
> +#define IMAGE_STATE_RESET 0
> +#define IMAGE_STATE_COPIED 1
> +#define IMAGE_STATE_COPYING 2
> +#define IMAGE_STATE_AUTHENTICATED 3
> +#define IMAGE_STATE_EXECUTED 4
> +#define IMAGE_STATE_INTERRUPTED 5
> +
> +#define EP_SECURE 0x0
> +#define EP_NON_SECURE 0x1
> +
> +#define EP_EE_MASK 0x2
> +#define EP_EE_LITTLE 0x0
> +#define EP_EE_BIG 0x2
> +#define EP_GET_EE(x) (x & EP_EE_MASK)
> +#define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee))
> +
> +#define EP_ST_MASK 0x4
> +#define EP_ST_DISABLE 0x0
> +#define EP_ST_ENABLE 0x4
> +#define EP_GET_ST(x) (x & EP_ST_MASK)
> +#define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee))
> +
> +#define EP_EXE_MASK 0x8
> +#define NON_EXECUTABLE 0x0
> +#define EXECUTABLE 0x8
> +#define EP_GET_EXE(x) (x & EP_EXE_MASK)
> +#define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee))
> +
> +#define PARAM_EP 0x01
> +#define PARAM_IMAGE_BINARY 0x02
> +#define PARAM_BL31 0x03
> +
> +#define VERSION_1 0x01
> +
> +#define INVALID_IMAGE_ID (0xFFFFFFFF)
> +
> +#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
> + (_p)->h.type = (uint8_t)(_type); \
> + (_p)->h.version = (uint8_t)(_ver); \
> + (_p)->h.size = (uint16_t)sizeof(*_p); \
> + (_p)->h.attr = (uint32_t)(_attr) ; \
> + } while (0)
> +
> +/* Following is used for populating structure members statically. */
> +#define SET_STATIC_PARAM_HEAD(_p, _type, _ver, _p_type, _attr) \
> + ._p.h.type = (uint8_t)(_type), \
> + ._p.h.version = (uint8_t)(_ver), \
> + ._p.h.size = (uint16_t)sizeof(_p_type), \
> + ._p.h.attr = (uint32_t)(_attr)
> +
> +#define MODE_RW_SHIFT 0x4
> +#define MODE_RW_MASK 0x1
> +#define MODE_RW_64 0x0
> +#define MODE_RW_32 0x1
> +
> +#define MODE_EL_SHIFT 0x2
> +#define MODE_EL_MASK 0x3
> +#define MODE_EL3 0x3
> +#define MODE_EL2 0x2
> +#define MODE_EL1 0x1
> +#define MODE_EL0 0x0
> +
> +#define MODE_SP_SHIFT 0x0
> +#define MODE_SP_MASK 0x1
> +#define MODE_SP_EL0 0x0
> +#define MODE_SP_ELX 0x1
> +
> +#define SPSR_DAIF_SHIFT 6
> +#define SPSR_DAIF_MASK 0x0f
> +
> +#define DAIF_FIQ_BIT (1<<0)
> +#define DAIF_IRQ_BIT (1<<0)
> +#define DAIF_ABT_BIT (1<<0)
> +#define DAIF_DBG_BIT (1<<0)
> +#define DISABLE_ALL_EXECPTIONS \
> + (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT | DAIF_DBG_BIT)
> +
> +#define SPSR_64(el, sp, daif) \
> + (MODE_RW_64 << MODE_RW_SHIFT | \
> + ((el) & MODE_EL_MASK) << MODE_EL_SHIFT | \
> + ((sp) & MODE_SP_MASK) << MODE_SP_SHIFT | \
> + ((daif) & SPSR_DAIF_MASK) << SPSR_DAIF_SHIFT)
> +
> +/*******************************************************************************
> + * Constants to indicate type of exception to the common exception handler.
> + ******************************************************************************/
> +#define SYNC_EXCEPTION_SP_EL0 0x0
> +#define IRQ_SP_EL0 0x1
> +#define FIQ_SP_EL0 0x2
> +#define SERROR_SP_EL0 0x3
> +#define SYNC_EXCEPTION_SP_ELX 0x4
> +#define IRQ_SP_ELX 0x5
> +#define FIQ_SP_ELX 0x6
> +#define SERROR_SP_ELX 0x7
> +#define SYNC_EXCEPTION_AARCH64 0x8
> +#define IRQ_AARCH64 0x9
> +#define FIQ_AARCH64 0xa
> +#define SERROR_AARCH64 0xb
> +#define SYNC_EXCEPTION_AARCH32 0xc
> +#define IRQ_AARCH32 0xd
> +#define FIQ_AARCH32 0xe
> +#define SERROR_AARCH32 0xf
> +
> +#define SPSR_USE_L 0
> +#define SPSR_USE_H 1
> +#define SPSR_L_H_MASK 1
> +#define SPSR_M_SHIFT 4
> +#define SPSR_ERET_32 (1 << SPSR_M_SHIFT)
> +#define SPSR_ERET_64 (0 << SPSR_M_SHIFT)
> +#define SPSR_FIQ (1 << 6)
> +#define SPSR_IRQ (1 << 7)
> +#define SPSR_SERROR (1 << 8)
> +#define SPSR_DEBUG (1 << 9)
> +#define SPSR_EXCEPTION_MASK (SPSR_FIQ | SPSR_IRQ | SPSR_SERROR | SPSR_DEBUG)
> +
> +#ifndef __ASSEMBLY__
> +
> +/*******************************************************************************
> + * Structure used for telling the next BL how much of a particular type of
> + * memory is available for its use and how much is already used.
> + ******************************************************************************/
> +struct aapcs64_params_t {
> + unsigned long arg0;
> + unsigned long arg1;
> + unsigned long arg2;
> + unsigned long arg3;
> + unsigned long arg4;
> + unsigned long arg5;
> + unsigned long arg6;
> + unsigned long arg7;
> +};
> +
> +/***************************************************************************
> + * This structure provides version information and the size of the
> + * structure, attributes for the structure it represents
> + ***************************************************************************/
> +struct param_header_t {
> + uint8_t type; /* type of the structure */
> + uint8_t version; /* version of this structure */
> + uint16_t size; /* size of this structure in bytes */
> + uint32_t attr; /* attributes: unused bits SBZ */
> +};
> +
> +/*****************************************************************************
> + * This structure represents the superset of information needed while
> + * switching exception levels. The only two mechanisms to do so are
> + * ERET & SMC. Security state is indicated using bit zero of header
> + * attribute
> + * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
> + * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
> + * processing SMC to jump to BL31.
> + *****************************************************************************/
> +struct entry_point_info_t {
> + struct param_header_t h;
> + uintptr_t pc;
> + uint32_t spsr;
> + struct aapcs64_params_t args;
> +};
> +
> +/*****************************************************************************
> + * Image info binary provides information from the image loader that
> + * can be used by the firmware to manage available trusted RAM.
> + * More advanced firmware image formats can provide additional
> + * information that enables optimization or greater flexibility in the
> + * common firmware code
> + *****************************************************************************/
> +struct atf_image_info_t {
> + struct param_header_t h;
> + uintptr_t image_base; /* physical address of base of image */
> + uint32_t image_size; /* bytes read from image file */
> +};
> +
> +/*****************************************************************************
> + * The image descriptor struct definition.
> + *****************************************************************************/
> +struct image_desc_t {
> + /* Contains unique image id for the image. */
> + unsigned int image_id;
> + /*
> + * This member contains Image state information.
> + * Refer IMAGE_STATE_XXX defined above.
> + */
> + unsigned int state;
> + uint32_t copied_size; /* image size copied in blocks */
> + struct atf_image_info_t atf_image_info;
> + struct entry_point_info_t ep_info;
> +};
> +
> +/*******************************************************************************
> + * This structure represents the superset of information that can be passed to
> + * BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
> + * populated only if BL2 detects its presence. A pointer to a structure of this
> + * type should be passed in X0 to BL31's cold boot entrypoint.
> + *
> + * Use of this structure and the X0 parameter is not mandatory: the BL31
> + * platform code can use other mechanisms to provide the necessary information
> + * about BL32 and BL33 to the common and SPD code.
> + *
> + * BL31 image information is mandatory if this structure is used. If either of
> + * the optional BL32 and BL33 image information is not provided, this is
> + * indicated by the respective image_info pointers being zero.
> + ******************************************************************************/
> +struct bl31_params_t {
> + struct param_header_t h;
> + struct atf_image_info_t *bl31_image_info;
> + struct entry_point_info_t *bl32_ep_info;
> + struct atf_image_info_t *bl32_image_info;
> + struct entry_point_info_t *bl33_ep_info;
> + struct atf_image_info_t *bl33_image_info;
> +};
> +
> +/*******************************************************************************
> + * This structure represents the superset of information that is passed to
> + * BL31, e.g. while passing control to it from BL2, bl31_params
> + * and other platform specific params
> + ******************************************************************************/
> +struct bl2_to_bl31_params_mem_t {
> + struct bl31_params_t bl31_params;
> + struct atf_image_info_t bl31_image_info;
> + struct atf_image_info_t bl32_image_info;
> + struct atf_image_info_t bl33_image_info;
> + struct entry_point_info_t bl33_ep_info;
> + struct entry_point_info_t bl32_ep_info;
> + struct entry_point_info_t bl31_ep_info;
> +};
> +
> +#endif /*__ASSEMBLY__*/
> +
> +#endif /* __BL_COMMON_H__ */
> diff --git a/include/spl.h b/include/spl.h
> index 918c464..ab5eaca 100644
> --- a/include/spl.h
> +++ b/include/spl.h
> @@ -251,4 +251,5 @@ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
> int spl_mmc_load_image(struct spl_image_info *spl_image,
> struct spl_boot_device *bootdev);
>
> +void bl31_entry(void);
> #endif
More information about the U-Boot
mailing list