[U-Boot] [RFC PATCH 03/11] SPL: FIT: factor out spl_load_fit_image()

Kever Yang kever.yang at rock-chips.com
Sun Jan 22 08:16:39 CET 2017


Hi Andre,

On 01/20/2017 09:53 AM, Andre Przywara wrote:
> At the moment we load two images from a FIT image: the actual U-Boot
> image and the DTB. Both times we have very similar code to deal with
> alignment requirement the media we load from imposes upon us.
> Factor out this code into a new function, which we just call twice.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>   common/spl/spl_fit.c | 122 +++++++++++++++++++++------------------------------
>   1 file changed, 51 insertions(+), 71 deletions(-)
>
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index 381ed1f..d4149c5 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -138,19 +138,58 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size,
>   	return (data_size + info->bl_len - 1) / info->bl_len;
>   }
>   
> +static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
> +			      void *fit, ulong base_offset, int node,
> +			      struct spl_image_info *image_info)
> +{
> +	ulong offset;
> +	size_t length;
> +	ulong load, entry;
> +	void *src;
> +	ulong overhead;
> +	int nr_sectors;
> +
> +	offset = fdt_getprop_u32(fit, node, "data-offset") + base_offset;
> +	length = fdt_getprop_u32(fit, node, "data-size");
> +	load = fdt_getprop_u32(fit, node, "load");
> +	if (load == -1U && image_info)
> +		load = image_info->load_addr;
> +	entry = fdt_getprop_u32(fit, node, "entry");
> +
> +	overhead = get_aligned_image_overhead(info, offset);
> +	nr_sectors = get_aligned_image_size(info, overhead + length, offset);
> +
> +	if (info->read(info, sector + get_aligned_image_offset(info, offset),
> +		       nr_sectors, (void*)load) != nr_sectors)
> +		return -EIO;
> +	debug("image: dst=%lx, offset=%lx, size=%lx\n", load, offset,
> +	      (unsigned long)length);
> +
> +	src = (void *)load + overhead;
> +#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> +	board_fit_image_post_process(&src, &length);
> +#endif
> +
> +	memcpy((void*)load, src, length);

For FIT image, we read the first block for header, and then we know the 
offset
and size for images, is it possible to have an option that we can read 
the image
data to load address directly without memcpy(), this helps speed up the 
boot time.

Thanks,
- Kever
> +
> +	if (image_info) {
> +		image_info->load_addr = load;
> +		image_info->size = length;
> +		image_info->entry_point = entry;
> +	}
> +
> +	return 0;
> +}
> +
>   int spl_load_simple_fit(struct spl_image_info *spl_image,
>   			struct spl_load_info *info, ulong sector, void *fit)
>   {
>   	int sectors;
> -	ulong size, load;
> +	ulong size;
>   	unsigned long count;
> +	struct spl_image_info image_info;
>   	int node, images;
> -	void *load_ptr;
> -	int fdt_offset, fdt_len;
> -	int data_offset, data_size;
>   	int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
> -	int src_sector;
> -	void *dst, *src;
>   
>   	/*
>   	 * Figure out where the external images start. This is the base for the
> @@ -202,82 +241,23 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
>   		return -1;
>   	}
>   
> -	/* Get its information and set up the spl_image structure */
> -	data_offset = fdt_getprop_u32(fit, node, "data-offset");
> -	data_size = fdt_getprop_u32(fit, node, "data-size");
> -	load = fdt_getprop_u32(fit, node, "load");
> -	debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
> -	spl_image->load_addr = load;
> -	spl_image->entry_point = load;
> +	/* Load the image and set up the spl_image structure */
> +	spl_load_fit_image(info, sector, fit, base_offset, node, spl_image);
>   	spl_image->os = IH_OS_U_BOOT;
>   
> -	/*
> -	 * Work out where to place the image. We read it so that the first
> -	 * byte will be at 'load'. This may mean we need to load it starting
> -	 * before then, since we can only read whole blocks.
> -	 */
> -	data_offset += base_offset;
> -	sectors = get_aligned_image_size(info, data_size, data_offset);
> -	load_ptr = (void *)load;
> -	debug("U-Boot size %x, data %p\n", data_size, load_ptr);
> -	dst = load_ptr;
> -
> -	/* Read the image */
> -	src_sector = sector + get_aligned_image_offset(info, data_offset);
> -	debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
> -	      dst, src_sector, sectors);
> -	count = info->read(info, src_sector, sectors, dst);
> -	if (count != sectors)
> -		return -EIO;
> -	debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
> -	      data_size);
> -	src = dst + get_aligned_image_overhead(info, data_offset);
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> -	board_fit_image_post_process((void **)&src, (size_t *)&data_size);
> -#endif
> -
> -	memcpy(dst, src, data_size);
> -
>   	/* Figure out which device tree the board wants to use */
>   	node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
>   	if (node < 0) {
>   		debug("%s: cannot find FDT node\n", __func__);
>   		return node;
>   	}
> -	fdt_offset = fdt_getprop_u32(fit, node, "data-offset");
> -	fdt_len = fdt_getprop_u32(fit, node, "data-size");
>   
>   	/*
> -	 * Read the device tree and place it after the image. There may be
> -	 * some extra data before it since we can only read entire blocks.
> -	 * And also align the destination address to ARCH_DMA_MINALIGN.
> +	 * Read the device tree and place it after the image.
> +	 * Align the destination address to ARCH_DMA_MINALIGN.
>   	 */
> -	dst = (void *)((load + data_size + align_len) & ~align_len);
> -	fdt_offset += base_offset;
> -	sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
> -	src_sector = sector + get_aligned_image_offset(info, fdt_offset);
> -	count = info->read(info, src_sector, sectors, dst);
> -	debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
> -	      dst, src_sector, sectors);
> -	if (count != sectors)
> -		return -EIO;
> -
> -	/*
> -	 * Copy the device tree so that it starts immediately after the image.
> -	 * After this we will have the U-Boot image and its device tree ready
> -	 * for us to start.
> -	 */
> -	debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
> -	      fdt_len);
> -	src = dst + get_aligned_image_overhead(info, fdt_offset);
> -	dst = load_ptr + data_size;
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> -	board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
> -#endif
> -
> -	memcpy(dst, src, fdt_len);
> +	image_info.load_addr = spl_image->load_addr + spl_image->size;
> +	spl_load_fit_image(info, sector, fit, base_offset, node, &image_info);
>   
>   	return 0;
>   }




More information about the U-Boot mailing list