[U-Boot] [PATCH v4 06/28] arm: socfpga: arria10: add socfpga_arria10_socdk config

[Marek Vasut]

On 01/10/2017 06:20 AM, Chee Tien Fong wrote:
> From: Tien Fong Chee <tien.fong.chee at intel.com>
> 
> Add config for the Arria10 SoC Development Kit.
> 
> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> Acked-by: Marek Vasut <marex at denx.de>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Dinh Nguyen <dinguyen at kernel.org>
> Cc: Chin Liang See <chin.liang.see at intel.com>
> Cc: Tien Fong <skywindctf at gmail.com>
> ---
>  include/configs/socfpga_arria10_socdk.h | 94 +++++++++++++++++++++++++++++++++
>  1 file changed, 94 insertions(+)
>  create mode 100644 include/configs/socfpga_arria10_socdk.h
> 
> diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h
> new file mode 100644
> index 0000000..577f60f
> --- /dev/null
> +++ b/include/configs/socfpga_arria10_socdk.h
> @@ -0,0 +1,94 @@
> +/*
> + *  Copyright (C) 2015 Altera Corporation <www.altera.com>

2017 ... fix globally.

> + * SPDX-License-Identifier:	GPL-2.0
> + */
> +
> +#ifndef __CONFIG_SOCFGPA_ARRIA10_H__
> +#define __CONFIG_SOCFGPA_ARRIA10_H__
> +
> +#include <asm/arch/base_addr_a10.h>
> +/* U-Boot Commands */
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_FAT_WRITE
> +#define CONFIG_HW_WATCHDOG
> +
> +#define CONFIG_CMD_ASKENV
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FS_GENERIC
> +#define CONFIG_CMD_GREPENV
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_PING

A lot of this stuff was converted to Kconfig, please recheck.

> +/*
> + * Memory configurations
> + */
> +#define PHYS_SDRAM_1_SIZE		0x2000000
> +
> +/* Booting Linux */
> +#define CONFIG_BOOTDELAY	3
> +#define CONFIG_BOOTFILE		"zImage"
> +#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
> +#define CONFIG_BOOTCOMMAND      "run mmcload; run mmcboot"
> +#define CONFIG_LOADADDR		0x01000000
> +#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
> +
> +/*
> + * Display CPU and Board Info
> + */
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +#define CONFIG_DISPLAY_BOARDINFO_LATE
> +
> +/* Ethernet on SoC (EMAC) */
> +#if defined(CONFIG_CMD_NET)
> +
> +/* PHY */
> +#define CONFIG_PHY_MICREL
> +#define CONFIG_PHY_MICREL_KSZ9031
> +
> +#endif
> +
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV		0/* device 0 */
> +#define CONFIG_ENV_OFFSET		512/* just after the MBR */
> +
> +/*
> + * arguments passed to the bootz command. The value of
> + * CONFIG_BOOTARGS goes into the environment value "bootargs".
> + * Do note the value will overide also the chosen node in FDT blob.
> + */
> +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"verify=n\0" \
> +	"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> +	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
> +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> +	"bootimage=zImage\0" \
> +	"fdt_addr=100\0" \
> +	"fdtimage=socfpga.dtb\0" \
> +		"fsloadcmd=ext2load\0" \
> +	"bootm ${loadaddr} - ${fdt_addr}\0" \
> +	"mmcroot=/dev/mmcblk0p2\0" \
> +	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
> +		" root=${mmcroot} rw rootwait;" \
> +		"bootz ${loadaddr} - ${fdt_addr}\0" \
> +	"mmcload=mmc rescan;" \
> +		"load mmc 0:1 ${loadaddr} ${bootimage};" \
> +		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
> +	"qspiroot=/dev/mtdblock0\0" \
> +	"qspirootfstype=jffs2\0" \
> +	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> +		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
> +		"bootm ${loadaddr} - ${fdt_addr}\0"

Take a look at:
[PATCH v2 0/7] arm: socfpga: update socfpga environments
and adjust accordingly.

> +/* The rest of the configuration is shared */
> +#include <configs/socfpga_common.h>
> +#endif	/* __CONFIG_H */
> 


-- 
Best regards,
Marek Vasut