[U-Boot] [PATCH 1/2][v4] arch: powerpc: update the IFC IP input clock

[Prabhakar Kushwaha]

IFC IP clock is always a constant divisor of platform clock
pre-defined per SoC. Clock control register (CCR) used in
current implementation governs IFC IP output clock.

So update IFC IP clock to be defined as per predefined clock
divisor of platform clock.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
---
Changes for v2: Split the patch in 2 patch set
Changes for v3: Rebased on top of u-boot commit
Changes for v4: fix compilation error

 README                           |  3 +++
 arch/powerpc/cpu/mpc85xx/Kconfig | 20 ++++++++++++++++++++
 arch/powerpc/cpu/mpc85xx/speed.c | 10 ++--------
 3 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/README b/README
index a95348a..9fda381 100644
--- a/README
+++ b/README
@@ -504,6 +504,9 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_IFC_LE
 		Defines the IFC controller register space as Little Endian
 
+		CONFIG_SYS_FSL_IFC_CLK_DIV
+		Defines divider of platform clock(clock input to IFC controller).
+
 		CONFIG_SYS_FSL_PBL_PBI
 		It enables addition of RCW (Power on reset configuration) in built image.
 		Please refer doc/README.pblimage for more details
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 704f65b..697d1a8 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1248,6 +1248,26 @@ config SYS_PPC_E500_DEBUG_TLB
                 symbol should be set to the TLB1 entry to be used for this
                 purpose. If unsure, do not change.
 
+config SYS_FSL_IFC_CLK_DIV
+	int "Divider of platform clock"
+	default 2 if	ARCH_B4420	|| \
+			ARCH_B4860	|| \
+			ARCH_T1024	|| \
+			ARCH_T1023	|| \
+			ARCH_T1040	|| \
+			ARCH_T1042	|| \
+			ARCH_T4160	|| \
+			ARCH_T4240
+	default 1 if	ARCH_BSC9131	|| \
+			ARCH_BSC9132	|| \
+			ARCH_C29X	|| \
+			ARCH_P1010	|| \
+			ARCH_T2080	|| \
+			ARCH_T2081
+	help
+		Defines divider of platform clock(clock input to
+		IFC controller).
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index fcf5d92..adba092 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -27,10 +27,6 @@ DECLARE_GLOBAL_DATA_PTR;
 void get_sys_info(sys_info_t *sys_info)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
-	struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
-	u32 ccr;
-#endif
 #ifdef CONFIG_FSL_CORENET
 	volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
 	unsigned int cpu;
@@ -640,10 +636,8 @@ void get_sys_info(sys_info_t *sys_info)
 #endif
 
 #if defined(CONFIG_FSL_IFC)
-	ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr);
-	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
-	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+	sys_info->freq_localbus = sys_info->freq_systembus /
+						CONFIG_SYS_FSL_IFC_CLK_DIV;
 #endif
 }
 
-- 
2.7.4