[U-Boot] [PATCH v4 2/7] arm: socfpga: update de0 nano default environment

[Dalon Westergreen]

From: Dalon Westergreen <dalon.westergreen at intel.com>

Remove the default environment as it is now in a common
header.

Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig
to set the linux devicetree name.

Signed-off-by: Dalon Westergreen <dalon.westergreen at intel.com>
---
 configs/socfpga_de0_nano_soc_defconfig |  3 +--
 include/configs/socfpga_de0_nano_soc.h | 19 +------------------
 2 files changed, 2 insertions(+), 20 deletions(-)

diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig
index af41e1e..4837809 100644
--- a/configs/socfpga_de0_nano_soc_defconfig
+++ b/configs/socfpga_de0_nano_soc_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_sockit.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
@@ -20,7 +21,6 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
@@ -35,7 +35,6 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_UBI=y
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h
index 6b9546e..97216ea 100644
--- a/include/configs/socfpga_de0_nano_soc.h
+++ b/include/configs/socfpga_de0_nano_soc.h
@@ -18,7 +18,7 @@
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */
 
 /* Booting Linux */
-#define CONFIG_BOOTFILE		"fitImage"
+#define CONFIG_BOOTFILE		"zImage"
 #define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
 #define CONFIG_LOADADDR		0x01000000
@@ -32,23 +32,6 @@
 
 #define CONFIG_ENV_IS_IN_MMC
 
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"bootimage=zImage\0" \
-	"fdt_addr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-	"bootm ${loadaddr} - ${fdt_addr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-- 
2.7.4