[U-Boot] [PATCH v2 10/13] sunxi: prepare for sharing MACH_SUN8I_H3 config symbol

Andre Przywara andre.przywara at arm.com
Wed Jan 25 03:22:44 CET 2017


The Allwinner H5 is very close to the H3 SoC, but has ARMv8 cores.
To allow sharing the clocks, GPIO and driver code easily, create an
architecture agnostic MACH_SUNXI_H3_H5 Kconfig symbol.
Rename the existing symbol to MACH_SUNXI_H3_H5 where code is shared and
let it be selected by a new shared Kconfig option.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h |  4 ++--
 arch/arm/include/asm/arch-sunxi/cpu_sun4i.h   |  4 ++--
 arch/arm/include/asm/arch-sunxi/dram.h        |  2 +-
 arch/arm/mach-sunxi/Makefile                  |  2 +-
 arch/arm/mach-sunxi/board.c                   |  2 +-
 arch/arm/mach-sunxi/clock_sun6i.c             |  6 +++---
 arch/arm/mach-sunxi/usb_phy.c                 |  4 ++--
 board/sunxi/Kconfig                           | 14 +++++++++-----
 drivers/mtd/spi/Kconfig                       |  2 +-
 drivers/net/sun8i_emac.c                      |  2 +-
 drivers/power/Kconfig                         |  4 ++--
 drivers/usb/host/ehci-sunxi.c                 |  2 +-
 12 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 3f87672..1bfb48b 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -242,7 +242,7 @@ struct sunxi_ccm_reg {
 /* ahb_gate0 offsets */
 #define AHB_GATE_OFFSET_USB_OHCI1	30
 #define AHB_GATE_OFFSET_USB_OHCI0	29
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 /*
  * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
  * them 0 - 2 like they were called on older SoCs.
@@ -293,7 +293,7 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
 #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
 #define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 /*
  * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
  * them 0 - 2 like they were called on older SoCs.
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 3c85222..ea672fe 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -56,7 +56,7 @@
 #define SUNXI_USB2_BASE			0x01c1c000
 #endif
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
 #define SUNXI_USBPHY_BASE		0x01c19000
 #define SUNXI_USB0_BASE			0x01c1a000
 #define SUNXI_USB1_BASE			0x01c1b000
@@ -94,7 +94,7 @@
 #define SUNXI_KEYPAD_BASE		0x01c23000
 #define SUNXI_TZPC_BASE			0x01c23400
 
-#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
 defined(CONFIG_MACH_SUN50I)
 /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
 #define SUNXI_SIDC_BASE			0x01c14000
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index 53e6d47..1dc8220 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -24,7 +24,7 @@
 #include <asm/arch/dram_sun8i_a33.h>
 #elif defined(CONFIG_MACH_SUN8I_A83T)
 #include <asm/arch/dram_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
 #include <asm/arch/dram_sun8i_h3.h>
 #elif defined(CONFIG_MACH_SUN9I)
 #include <asm/arch/dram_sun9i.h>
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 7daba11..efab481 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
 obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
 obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
 obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
+obj-$(CONFIG_MACH_SUNXI_H3_H5)	+= dram_sun8i_h3.o
 obj-$(CONFIG_MACH_SUN9I)	+= dram_sun9i.o
 obj-$(CONFIG_MACH_SUN50I)	+= dram_sun8i_h3.o
 endif
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 96764d1..5e03d03 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -98,7 +98,7 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5)
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index d123b3a..4762fbf 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -22,7 +22,7 @@ void clock_init_safe(void)
 	struct sunxi_ccm_reg * const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
-#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I)
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
 	struct sunxi_prcm_reg * const prcm =
 		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 
@@ -51,7 +51,7 @@ void clock_init_safe(void)
 
 void clock_init_sec(void)
 {
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 	struct sunxi_ccm_reg * const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
@@ -152,7 +152,7 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
 	const int max_n = 32;
 	int k = 1, m = 2;
 
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 	clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK |
 			CCM_PLL5_TUN_INIT_FREQ_MASK,
 			CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16));
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index 278587b..9bf0b56 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -146,10 +146,10 @@ __maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
 	}
 }
 
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
 static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 {
-#if defined CONFIG_MACH_SUN8I_H3
+#if defined CONFIG_MACH_SUNXI_H3_H5
 	if (phy->id == 0)
 		clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
 #endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 5a71050..a63e176 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -51,6 +51,11 @@ config SUNXI_GEN_SUN6I
 	watchdog, etc.
 
 
+config MACH_SUNXI_H3_H5
+	bool
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
 choice
 	prompt "Sunxi SoC Variant"
 	optional
@@ -121,8 +126,7 @@ config MACH_SUN8I_H3
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select SUNXI_GEN_SUN6I
-	select SUPPORT_SPL
+	select MACH_SUNXI_H3_H5
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
 config MACH_SUN9I
@@ -144,7 +148,7 @@ endchoice
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
 	bool
-	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
+	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
 
 config RESERVE_ALLWINNER_BOOT0_HEADER
 	bool "reserve space for Allwinner boot0 header"
@@ -332,7 +336,7 @@ config OLD_SUNXI_KERNEL_COMPAT
 
 config MMC0_CD_PIN
 	string "Card detect pin for mmc0"
-	default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
+	default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
 	default ""
 	---help---
 	Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -497,7 +501,7 @@ config AXP_GPIO
 
 config VIDEO
 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
-	depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
+	depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 1f23c8e..5ca0a71 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -132,7 +132,7 @@ if SPL
 
 config SPL_SPI_SUNXI
 	bool "Support for SPI Flash on Allwinner SoCs in SPL"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
 	---help---
 	Enable support for SPI Flash. This option allows SPL to read from
 	sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index abd9cc8..dda9adc 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -62,7 +62,7 @@
 
 #define AHB_GATE_OFFSET_EPHY	0
 
-#if defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUNXI_H3_H5)
 #define SUN8I_GPD8_GMAC		2
 #else
 #define SUN8I_GPD8_GMAC		4
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f2c5629..64e5bc2 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -12,7 +12,7 @@ choice
 	default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
 	default AXP818_POWER if MACH_SUN8I_A83T
-	default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
+	default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
 
 config SUNXI_NO_PMIC
 	bool "board without a pmic"
@@ -60,7 +60,7 @@ config AXP818_POWER
 
 config SY8106A_POWER
 	bool "SY8106A pmic support"
-	depends on MACH_SUN8I_H3
+	depends on MACH_SUNXI_H3_H5
 	---help---
 	Select this to enable support for the SY8106A pmic found on some
 	H3 boards.
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 5bb97ff..068f24f 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -45,7 +45,7 @@ static int ehci_usb_probe(struct udevice *dev)
 	 * clocks resp. phys.
 	 */
 	priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
 	extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
 #endif
 	priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;
-- 
2.8.2



More information about the U-Boot mailing list