[U-Boot] [PATCH v4 1/7] arm: socfpga: add env settings to common header

[Westergreen, Dalon]

On Tue, 2017-01-24 at 21:31 -0600, Dinh Nguyen wrote:
> 
> On 01/24/2017 11:05 AM, Dalon Westergreen wrote:
> > 
> > From: Dalon Westergreen <dalon.westergreen at intel.com>
> > 
> > Move repeated environment settings for socfpga boards
> > to a common header.
> > 
> > The default values for the boot partition and the
> > OS filesystem partition have changed and as
> > as result the default uboot environment for socfpga
> > boards needs updating.
> > 
> > Move to using  CONFIG_DEFAULT_DEVICE_TREE for setting the
> > default linux devicetree used during linux boot.
> > 
> > Signed-off-by: Dalon Westergreen <dalon.westergreen at intel.com>
> > ---
> >  include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h
> > index 6285266..bdd6e2f 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -336,5 +336,32 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> >   * Stack setup
> >   */
> >  #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> > +	
> > +/* Extra Environment */
> > +#ifndef CONFIG_EXTRA_ENV_SETTINGS
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > +	"verify=n\0" \
> > +	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > +	"bootimage=" CONFIG_BOOTFILE "\0" \
> > +	"fdt_addr=100\0" \
> > +	"fdtimage=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > +	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
> > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > +	"mmcroot=/dev/mmcblk0p3\0" \
> 
> Should this be mmcblk0p2?
that was the point of the patches, p1 is now the
a2 partition, so the fat and root partition 
shifted up by 1.

> 
> Dinh
-- 
------------------------------------------
Dalon Westergreen
Embedded Specialist
Intel Programmable Solutions Group
Phone : 1.858.202.3518
------------------------------------------