[U-Boot] [PATCH 4/7] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
Roger Quadros
rogerq at ti.com
Thu Jan 26 14:07:26 CET 2017
Use the same convention that was used for ICSS1 Ethernet
- If pin is output, set as PIN_OUTPUT
- If pin is input and external pull resistor present set as PIN_INPUT
- If pin is input and external pull resistor absent, set pull to same
as that of the external PHY's internall pull.
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
board/ti/am57xx/mux_data.h | 62 +++++++++++++++++++++++-----------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index ff0e517..5485212 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -586,46 +586,46 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
{GPIO6_14, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_14.gpio6_14 */
{GPIO6_15, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_15.gpio6_15 */
{GPIO6_16, (M14 | PIN_INPUT_PULLDOWN)}, /* gpio6_16.gpio6_16 */
- {XREF_CLK0, (M11 | PIN_INPUT_PULLDOWN)}, /* xref_clk0.pr2_mii1_col */
- {XREF_CLK1, (M11 | PIN_INPUT_PULLDOWN)}, /* xref_clk1.pr2_mii1_crs */
+ {XREF_CLK0, (M11 | PIN_INPUT)}, /* xref_clk0.pr2_mii1_col */
+ {XREF_CLK1, (M11 | PIN_INPUT_PULLUP)}, /* xref_clk1.pr2_mii1_crs */
{XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.gpio6_19 */
{XREF_CLK3, (M15 | PIN_INPUT_PULLDOWN)}, /* xref_clk3.Driveroff */
{MCASP1_ACLKX, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_aclkx.pr2_mdio_mdclk */
{MCASP1_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_fsx.pr2_mdio_data */
{MCASP1_ACLKR, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkr.gpio5_0 */
{MCASP1_FSR, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_fsr.gpio5_1 */
- {MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.pr2_mii0_rxer */
- {MCASP1_AXR1, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr1.pr2_mii_mt0_clk */
+ {MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP)}, /* mcasp1_axr0.pr2_mii0_rxer */
+ {MCASP1_AXR1, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr1.pr2_mii_mt0_clk */
{MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */
{MCASP1_AXR3, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr3.gpio5_5 */
{MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */
{MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */
{MCASP1_AXR6, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr6.gpio5_8 */
{MCASP1_AXR7, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr7.gpio5_9 */
- {MCASP1_AXR8, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr8.pr2_mii0_txen */
- {MCASP1_AXR9, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr9.pr2_mii0_txd3 */
- {MCASP1_AXR10, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr10.pr2_mii0_txd2 */
- {MCASP1_AXR11, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr11.pr2_mii0_txd1 */
- {MCASP1_AXR12, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr12.pr2_mii0_txd0 */
- {MCASP1_AXR13, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.pr2_mii_mr0_clk */
- {MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)}, /* mcasp1_axr14.pr2_mii0_rxdv */
- {MCASP1_AXR15, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr15.pr2_mii0_rxd3 */
- {MCASP2_ACLKX, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_aclkx.pr2_mii0_rxd2 */
- {MCASP2_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_fsx.pr2_mii0_rxd1 */
+ {MCASP1_AXR8, (M11 | PIN_OUTPUT)}, /* mcasp1_axr8.pr2_mii0_txen */
+ {MCASP1_AXR9, (M11 | PIN_OUTPUT)}, /* mcasp1_axr9.pr2_mii0_txd3 */
+ {MCASP1_AXR10, (M11 | PIN_OUTPUT)}, /* mcasp1_axr10.pr2_mii0_txd2 */
+ {MCASP1_AXR11, (M11 | PIN_OUTPUT)}, /* mcasp1_axr11.pr2_mii0_txd1 */
+ {MCASP1_AXR12, (M11 | PIN_OUTPUT)}, /* mcasp1_axr12.pr2_mii0_txd0 */
+ {MCASP1_AXR13, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr13.pr2_mii_mr0_clk */
+ {MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr14.pr2_mii0_rxdv */
+ {MCASP1_AXR15, (M11 | PIN_INPUT)}, /* mcasp1_axr15.pr2_mii0_rxd3 */
+ {MCASP2_ACLKX, (M11 | PIN_INPUT)}, /* mcasp2_aclkx.pr2_mii0_rxd2 */
+ {MCASP2_FSX, (M11 | PIN_INPUT)}, /* mcasp2_fsx.pr2_mii0_rxd1 */
{MCASP2_ACLKR, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.Driveroff */
{MCASP2_FSR, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_fsr.Driveroff */
{MCASP2_AXR0, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr0.Driveroff */
{MCASP2_AXR1, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr1.Driveroff */
- {MCASP2_AXR2, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_axr2.pr2_mii0_rxd0 */
- {MCASP2_AXR3, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)}, /* mcasp2_axr3.pr2_mii0_rxlink */
+ {MCASP2_AXR2, (M11 | PIN_INPUT)}, /* mcasp2_axr2.pr2_mii0_rxd0 */
+ {MCASP2_AXR3, (M11 | PIN_INPUT)}, /* mcasp2_axr3.pr2_mii0_rxlink */
{MCASP2_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr4.gpio1_4 */
{MCASP2_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr5.gpio6_7 */
{MCASP2_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr6.gpio2_29 */
{MCASP2_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr7.gpio1_5 */
- {MCASP3_ACLKX, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.pr2_mii0_crs */
- {MCASP3_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp3_fsx.pr2_mii0_col */
- {MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp3_axr0.pr2_mii1_rxer */
- {MCASP3_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp3_axr1.pr2_mii1_rxlink */
+ {MCASP3_ACLKX, (M11 | PIN_INPUT_PULLUP)}, /* mcasp3_aclkx.pr2_mii0_crs */
+ {MCASP3_FSX, (M11 | PIN_INPUT)}, /* mcasp3_fsx.pr2_mii0_col */
+ {MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP)}, /* mcasp3_axr0.pr2_mii1_rxer */
+ {MCASP3_AXR1, (M11 | PIN_INPUT)}, /* mcasp3_axr1.pr2_mii1_rxlink */
{MCASP4_ACLKX, (M2 | PIN_INPUT_PULLDOWN)}, /* mcasp4_aclkx.spi3_sclk */
{MCASP4_FSX, (M2 | PIN_INPUT_PULLDOWN)}, /* mcasp4_fsx.spi3_d1 */
{MCASP4_AXR0, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp4_axr0.Driveroff */
@@ -642,18 +642,18 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */
{MMC1_SDCD, (M14 | PIN_INPUT_PULLUP)}, /* mmc1_sdcd.gpio6_27 */
{MMC1_SDWP, (M0 | PIN_OUTPUT)}, /* mmc1_sdwp.mmc1_sdwp */
- {GPIO6_10, (M11 | PIN_INPUT_PULLUP)}, /* gpio6_10.pr2_mii_mt1_clk */
- {GPIO6_11, (M11 | PIN_INPUT_PULLUP)}, /* gpio6_11.pr2_mii1_txen */
- {MMC3_CLK, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_clk.pr2_mii1_txd3 */
- {MMC3_CMD, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_cmd.pr2_mii1_txd2 */
- {MMC3_DAT0, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat0.pr2_mii1_txd1 */
- {MMC3_DAT1, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat1.pr2_mii1_txd0 */
- {MMC3_DAT2, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat2.pr2_mii_mr1_clk */
+ {GPIO6_10, (M11 | PIN_INPUT_PULLDOWN)}, /* gpio6_10.pr2_mii_mt1_clk */
+ {GPIO6_11, (M11 | PIN_OUTPUT)}, /* gpio6_11.pr2_mii1_txen */
+ {MMC3_CLK, (M11 | PIN_OUTPUT)}, /* mmc3_clk.pr2_mii1_txd3 */
+ {MMC3_CMD, (M11 | PIN_OUTPUT)}, /* mmc3_cmd.pr2_mii1_txd2 */
+ {MMC3_DAT0, (M11 | PIN_OUTPUT)}, /* mmc3_dat0.pr2_mii1_txd1 */
+ {MMC3_DAT1, (M11 | PIN_OUTPUT)}, /* mmc3_dat1.pr2_mii1_txd0 */
+ {MMC3_DAT2, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat2.pr2_mii_mr1_clk */
{MMC3_DAT3, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat3.pr2_mii1_rxdv */
- {MMC3_DAT4, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat4.pr2_mii1_rxd3 */
- {MMC3_DAT5, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat5.pr2_mii1_rxd2 */
- {MMC3_DAT6, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat6.pr2_mii1_rxd1 */
- {MMC3_DAT7, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat7.pr2_mii1_rxd0 */
+ {MMC3_DAT4, (M11 | PIN_INPUT)}, /* mmc3_dat4.pr2_mii1_rxd3 */
+ {MMC3_DAT5, (M11 | PIN_INPUT)}, /* mmc3_dat5.pr2_mii1_rxd2 */
+ {MMC3_DAT6, (M11 | PIN_INPUT)}, /* mmc3_dat6.pr2_mii1_rxd1 */
+ {MMC3_DAT7, (M11 | PIN_INPUT)}, /* mmc3_dat7.pr2_mii1_rxd0 */
{SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.gpio7_7 */
{SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.gpio7_8 */
{SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.gpio7_9 */
--
2.7.4
More information about the U-Boot
mailing list