[U-Boot] [PATCH v2 1/4] mmc: meson: add MMC nodes to Meson GXBB DT

[Andreas Färber]

Hi,

Am 25.01.2017 um 20:52 schrieb Heiner Kallweit:
> Copied from amlogic/meson-gx.dtsi on Linux with the interrupt
> definition removed.

Is there any reason to not sync the full .dtsi file and its dependent
headers from Linux like I did in my recent forward-port of Carlo's series?

If there is a reason to remove the interrupt definitions, you should
explain that here please.

Regards,
Andreas

> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
> v2:
> - no changes
> ---
>  arch/arm/dts/meson-gxbb.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
> index e502c24..3f357b4 100644
> --- a/arch/arm/dts/meson-gxbb.dtsi
> +++ b/arch/arm/dts/meson-gxbb.dtsi
> @@ -329,6 +329,24 @@
>  			#address-cells = <2>;
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
> +
> +			sd_emmc_a: mmc at 70000 {
> +				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> +				reg = <0x0 0x70000 0x0 0x2000>;
> +				status = "disabled";
> +			};
> +
> +			sd_emmc_b: mmc at 72000 {
> +				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> +				reg = <0x0 0x72000 0x0 0x2000>;
> +				status = "disabled";
> +			};
> +
> +			sd_emmc_c: mmc at 74000 {
> +				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> +				reg = <0x0 0x74000 0x0 0x2000>;
> +				status = "disabled";
> +			};
>  		};
>  
>  		ethmac: ethernet at c9410000 {
> 


-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)