[U-Boot] [PATCH 5/7] board: ti: am57xx-idk: Auto detect LCD Panel
Roger Quadros
rogerq at ti.com
Fri Jan 27 09:54:17 CET 2017
On 26/01/17 19:33, menon.nishanth at gmail.com wrote:
> [...]
>
>
>> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
>> index 6de19c2..1fa2f82 100644
>> --- a/include/configs/ti_omap5_common.h
>> +++ b/include/configs/ti_omap5_common.h
>> @@ -91,16 +91,22 @@
>> "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
>> "if test $board_name = beagle_x15_revb1; then " \
>> "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
>> - "if test $board_name = am572x_idk; then " \
>> - "setenv fdtfile am572x-idk.dtb; fi;" \
>> "if test $board_name = am57xx_evm; then " \
>> "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
>> "if test $board_name = am57xx_evm_reva3; then " \
>> "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
>> + "if test $board_name = am572x_idk && test $idk_lcd = no; then " \
>> + "setenv fdtfile am572x-idk.dtb; fi;" \
>> + "if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then " \
>> + "setenv fdtfile am572x-idk-lcd-osd.dtb; fi;" \
>> + "if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then " \
>> + "setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;" \
>> "if test $board_name = am571x_idk && test $idk_lcd = no; then " \
>> "setenv fdtfile am571x-idk.dtb; fi;" \
>> "if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then " \
>> "setenv fdtfile am571x-idk-lcd-osd.dtb; fi;" \
>> + "if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then " \
>> + "setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;" \
>
>
> please drop the fdt selection from your patches. upstream will be
> using dt overlay for these variations. rest of the detection code is
> ok to go.
>
OK.
Just to clarify, dt overlay code will use the idk_lcd variable to patch the DT right?
cheeers,
-roger
More information about the U-Boot
mailing list