[U-Boot] [PATCH] README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to Kconfig

[Stefano Babic]

On 06/01/2017 00:33, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to
> Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update
> the mxc_hab README file to reflect that.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
>  doc/README.mxc_hab | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
> index b688580..c1f8ded 100644
> --- a/doc/README.mxc_hab
> +++ b/doc/README.mxc_hab
> @@ -2,10 +2,9 @@ High Assurance Boot (HAB) for i.MX6 CPUs
>  
>  To enable the authenticated or encrypted boot mode of U-Boot, it is
>  required to set the proper configuration for the target board. This
> -is done by adding the following configuration in in the proper config
> -file (e.g. include/configs/mx6qarm2.h)
> +is done by adding the following configuration in the defconfig file:
>  
> -#define CONFIG_SECURE_BOOT
> +CONFIG_SECURE_BOOT=y
>  
>  In addition, the U-Boot image to be programmed into the
>  boot media needs to be properly constructed, i.e. it must contain a
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================