[U-Boot] [PATCH] ARM: uniphier: update README.uniphier for latest build instruction

[Masahiro Yamada]

Since commit c0efc3140e75 ("ARM: uniphier: change CONFIG_SPL_PAD_TO
to 128KB"), the u-boot.bin should be burned at the offset 0x20000.
I missed to update README.uniphier in that commit.  Now updating.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 doc/README.uniphier | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/README.uniphier b/doc/README.uniphier
index 539b1f2..f79659c 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -75,7 +75,7 @@ Burn U-Boot images to NAND
 Write the following to the NAND device:
 
  - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin         at the offset address 0x00010000
+ - u-boot.bin         at the offset address 0x00020000
 
 or
 
@@ -94,7 +94,7 @@ Burn U-Boot images to eMMC
 Write the following to the Boot partition 1 of the eMMC device:
 
  - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin         at the offset address 0x00010000
+ - u-boot.bin         at the offset address 0x00020000
 
 or
 
@@ -179,4 +179,4 @@ newer SoCs.  Even if it is, EA[25] is not connected on most of the boards.
 
 --
 Masahiro Yamada <yamada.masahiro at socionext.com>
-Oct. 2016
+Jan. 2017
-- 
2.7.4