[U-Boot] [UBOOT v2 12/15] mmc: sdhci: Add support for eMMC HS200 mode

[Siva Durga Prasad Paladugu]

Add support for eMMC HS200 mode by reading
card type from ext_csd and then by switching to
HS200 timing mode.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
Changes from v1:
- Split the patch with only mmc changes
---
 drivers/mmc/mmc.c | 24 ++++++++++++++++++------
 include/mmc.h     |  7 +++++++
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 0f0bfc8..02c0408 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -619,9 +619,16 @@ static int mmc_change_freq(struct mmc *mmc)
 	if (err)
 		return err;
 
-	cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf;
+	cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0x3f;
 
-	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
+	if (cardtype & EXT_CSD_CARD_TYPE_HS200)
+		err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+				 EXT_CSD_HS_TIMING,
+				 EXT_CSD_HS_TIMING_HS200);
+	else
+		err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+				 EXT_CSD_HS_TIMING,
+				 EXT_CSD_HS_TIMING_HIGH_SPEED);
 
 	if (err)
 		return err;
@@ -636,8 +643,10 @@ static int mmc_change_freq(struct mmc *mmc)
 	if (!ext_csd[EXT_CSD_HS_TIMING])
 		return 0;
 
-	/* High Speed is set, there are two types: 52MHz and 26MHz */
-	if (cardtype & EXT_CSD_CARD_TYPE_52) {
+	/* High Speed is set, there are three types: 200MHZ, 52MHz and 26MHz */
+	if (cardtype & EXT_CSD_CARD_TYPE_HS200) {
+		mmc->card_caps |= MMC_MODE_HS200;
+	} else if (cardtype & EXT_CSD_CARD_TYPE_52) {
 		if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
 			mmc->card_caps |= MMC_MODE_DDR_52MHz;
 		mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
@@ -1659,7 +1668,9 @@ static int mmc_startup(struct mmc *mmc)
 		if (err)
 			return err;
 
-		if (mmc->card_caps & MMC_MODE_HS) {
+		if (mmc->card_caps & MMC_MODE_HS200) {
+			mmc->tran_speed = 200000000;
+		} else if (mmc->card_caps & MMC_MODE_HS) {
 			if (mmc->card_caps & MMC_MODE_HS_52MHz)
 				mmc->tran_speed = 52000000;
 			else
@@ -1670,7 +1681,8 @@ static int mmc_startup(struct mmc *mmc)
 	mmc_set_clock(mmc, mmc->tran_speed);
 
 	if ((mmc->card_caps & (MMC_MODE_UHS_SDR50 |
-			       MMC_MODE_UHS_SDR104)) &&
+			       MMC_MODE_UHS_SDR104 |
+			       MMC_MODE_HS200)) &&
 	    (mmc->cfg->host_caps & MMC_MODE_NEEDS_TUNING)) {
 		err = mmc_execute_tuning(mmc);
 		if (err)
diff --git a/include/mmc.h b/include/mmc.h
index 56395ee..90e1dcc 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -223,6 +223,13 @@
 #define EXT_CSD_CARD_TYPE_DDR_1_2V	(1 << 3)
 #define EXT_CSD_CARD_TYPE_DDR_52	(EXT_CSD_CARD_TYPE_DDR_1_8V \
 					| EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_HS200_1_8V	(1 << 4)
+#define EXT_CSD_CARD_TYPE_HS200_1_2V	(1 << 5)
+#define EXT_CSD_CARD_TYPE_HS200		(EXT_CSD_CARD_TYPE_HS200_1_8V \
+					| EXT_CSD_CARD_TYPE_HS200_1_2V)
+
+#define EXT_CSD_HS_TIMING_HIGH_SPEED	1
+#define EXT_CSD_HS_TIMING_HS200		2
 
 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
-- 
2.7.4