[U-Boot] [UBOOT v2 00/15] Add support for SD3.0 and eMMC HS200
Siva Durga Prasad Paladugu
siva.durga.paladugu at xilinx.com
Mon Jan 30 11:38:17 CET 2017
This patch series adds support SD3.0 and eMMC HS200
modes for ZynqMP. This series also contains changes
in mmc and sdhci framework to support SD3.0 and HS200.
Siva Durga Prasad Paladugu (15):
mmc: sdhci: Update host capabilities about host controller
mmc: Add support for SD3.0
mmc: sdhci: Add SD3.0 support
mmc: sdhci: Add support for platform/board specific tuning
mmc: sdhci: Add support for platform specific delay
mmc: sdhci: Make sdhci_ops of host as modifiable
zynqmp: Define routines for mmio write and read
mmc: sdhci: zynq: Define private structure arasan_sdhci_priv
mmc: sdhci: zynqmp: Add support of SD3.0
mmc: sdhci: Add quirk for 1.8v switching not supported
mmc: zynq_sdhci: Update quirk if 1.8v switching not supported
mmc: sdhci: Add support for eMMC HS200 mode
mmc: sdhci: Update execute tuning and set clock for HS200
mmc: sdhci: zynqmp: Set tapdelays for eMMC HS200 mode
mmc: Change frequency while accessing to boot partition
arch/arm/cpu/armv8/zynqmp/cpu.c | 51 ++++++
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 3 +
board/xilinx/zynqmp/Makefile | 1 +
board/xilinx/zynqmp/tap_delays.c | 250 +++++++++++++++++++++++++++
drivers/mmc/mmc-uclass.c | 52 ++++++
drivers/mmc/mmc.c | 218 +++++++++++++++++++++--
drivers/mmc/sdhci.c | 205 +++++++++++++++++++++-
drivers/mmc/zynq_sdhci.c | 170 +++++++++++++++++-
include/mmc.h | 74 +++++++-
include/sdhci.h | 18 +-
include/zynqmp_tap_delay.h | 20 +++
11 files changed, 1040 insertions(+), 22 deletions(-)
create mode 100644 board/xilinx/zynqmp/tap_delays.c
create mode 100644 include/zynqmp_tap_delay.h
--
2.7.4
More information about the U-Boot
mailing list