[U-Boot] [PATCH v2 6/8] armv7: Add workaround for USB erratum A-009798

Suresh Gupta suresh.gupta at nxp.com
Mon Jan 30 15:04:47 CET 2017


From: Suresh Gupta <suresh.gupta at freescale.com>

The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receive
Compliance test failure for a 100mV threshold.

The changes shift the threshold from ~100mV towards ~130mV resulting
in passing of USB High Speed Receiver Sensitivity Compliance test

Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta at nxp.com>
---
Changes in v2: None

 arch/arm/cpu/armv7/ls102xa/Kconfig                |  4 ++++
 arch/arm/cpu/armv7/ls102xa/soc.c                  | 10 ++++++++++
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |  1 +
 3 files changed, 15 insertions(+)

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 40c6782..b7e6e96 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -6,6 +6,7 @@ config ARCH_LS1021A
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR_BE if SYS_FSL_DDR
@@ -46,6 +47,9 @@ config SYS_FSL_ERRATUM_A010315
 config SYS_FSL_ERRATUM_A009008
 	bool "Workaround for USB PHY erratum A009008"
 
+config SYS_FSL_ERRATUM_A009798
+	bool "Workaround for USB PHY erratum A009798"
+
 config SYS_FSL_SRDS_1
 	bool
 
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index ee27b0c..7ae5b29 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -70,6 +70,15 @@ static void erratum_a009008(void)
 #endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
 }
 
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+	u32 val = in_be32(scfg + SCFG_USB3PRM1CR / 4);
+	out_be32(scfg + SCFG_USB3PRM1CR / 4, val & USB_SQRXTUNE);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
 void s_init(void)
 {
 }
@@ -158,6 +167,7 @@ int arch_soc_init(void)
 
 	/* Erratum */
 	erratum_a009008();
+	erratum_a009798();
 
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 6ea8c4b..8cafa07 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -176,6 +176,7 @@ struct ccsr_gur {
 #define SCFG_BASE			0x01570000
 #define SCFG_USB3PRM1CR			0x070
 #define USB_TXVREFTUNE			0x9
+#define USB_SQRXTUNE			0xFC7FFFFF
 
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
-- 
1.9.3



More information about the U-Boot mailing list