[U-Boot] [PATCH v3] sun50i: a64: Add initial Banana Pi M64 support

[Jagan Teki]

On Thu, Jun 1, 2017 at 2:23 AM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> On Wed, May 31, 2017 at 12:13:45PM +0000, Jagan Teki wrote:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> BPI-M64 is a 64-bit quad-core mini single board computer
>> using the Allwinner A64 SOC.
>>
>> BPI-M64 features
>> - 1.2 Ghz Quad-Core ARM Cortex A53
>> - 2GB DDR3 SDRAM with 733MHz
>> - MicroSD/eMMC(8GB)
>> - 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
>> - Wifi + BT
>> - IR receiver
>> - Audio In/Out
>> - Video In/Out
>> - 5V 2A DC power-supply
>>
>> For dts file,
>> Sync with Linux commit 4879b7ae("Merge tag 'dmaengine-4.12-rc1'").
>>
>> Boot from MMC:
>> -------------
>> U-Boot SPL 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31)
>> DRAM: 2048 MiB
>> Trying to boot from MMC1
>> NOTICE:  BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
>> NOTICE:  Configuring SPC Controller
>> NOTICE:  BL3-1: v1.0(debug):aa75c8d
>> NOTICE:  BL3-1: Built : 18:28:27, May 24 2017
>> NOTICE:  Configuring AXP PMIC
>> NOTICE:  PMIC: setup successful
>> INFO:    BL3-1: Initializing runtime services
>> INFO:    BL3-1: Preparing for EL3 exit to normal world
>> INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
>>
>> U-Boot 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31 +0000) Allwinner Technology
>>
>> CPU:   Allwinner A64 (SUN50I)
>> Model: BananaPi-M64
>> DRAM:  2 GiB
>> MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
>> *** Warning - bad CRC, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> starting USB...
>> No controllers found
>> Hit any key to stop autoboot:  0
>>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Applied to u-boot-sunxi/master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.