[U-Boot] [PATCH 5/5] rockchip: Add basic support for evb-rv1108 board
Andy Yan
andy.yan at rock-chips.com
Thu Jun 1 10:01:31 UTC 2017
Add basic support for rv1108 evb, whith this patch we
can boot into u-boot console.
Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rv1108-evb.dts | 54 ++++
arch/arm/dts/rv1108.dtsi | 479 +++++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/rv1108/Kconfig | 19 ++
board/rockchip/evb_rv1108/Kconfig | 15 ++
board/rockchip/evb_rv1108/MAINTAINERS | 6 +
board/rockchip/evb_rv1108/Makefile | 7 +
board/rockchip/evb_rv1108/README | 47 ++++
board/rockchip/evb_rv1108/evb_rv1108.c | 52 ++++
configs/evb-rv1108_defconfig | 40 +++
include/configs/evb_rv1108.h | 26 ++
11 files changed, 747 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rv1108-evb.dts
create mode 100644 arch/arm/dts/rv1108.dtsi
create mode 100644 board/rockchip/evb_rv1108/Kconfig
create mode 100644 board/rockchip/evb_rv1108/MAINTAINERS
create mode 100644 board/rockchip/evb_rv1108/Makefile
create mode 100644 board/rockchip/evb_rv1108/README
create mode 100644 board/rockchip/evb_rv1108/evb_rv1108.c
create mode 100644 configs/evb-rv1108_defconfig
create mode 100644 include/configs/evb_rv1108.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 4621c6f..a777384 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -46,7 +46,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3368-px5-evb.dtb \
rk3399-evb.dtb \
rk3399-firefly.dtb \
- rk3399-puma.dtb
+ rk3399-puma.dtb \
+ rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/dts/rv1108-evb.dts b/arch/arm/dts/rv1108-evb.dts
new file mode 100644
index 0000000..0128dd8
--- /dev/null
+++ b/arch/arm/dts/rv1108-evb.dts
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+ model = "Rockchip RV1108 Evaluation board";
+ compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
+
+ memory at 60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&gmac {
+ status = "okay";
+ clock_in_out = <0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+};
+
+&sfc {
+ status = "okay";
+ flash at 0 {
+ compatible = "gd25q256","spi-flash";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ spi-max-frequency = <96000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rv1108.dtsi b/arch/arm/dts/rv1108.dtsi
new file mode 100644
index 0000000..77ca24e
--- /dev/null
+++ b/arch/arm/dts/rv1108.dtsi
@@ -0,0 +1,479 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rv1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "rockchip,rv1108";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ spi0 = &sfc;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma at 102a0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x102a0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-broken-no-flushp;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ bus_intmem at 10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x2000>;
+ };
+
+ uart2: serial at 10210000 {
+ compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+ reg = <0x10210000 0x100>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial at 10220000 {
+ compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+ reg = <0x10220000 0x100>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial at 10230000 {
+ compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+ reg = <0x10230000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ grf: syscon at 10300000 {
+ compatible = "rockchip,rv1108-grf", "syscon";
+ reg = <0x10300000 0x1000>;
+ };
+
+ pmugrf: syscon at 20060000 {
+ compatible = "rockchip,rv1108-pmugrf", "syscon";
+ reg = <0x20060000 0x1000>;
+ };
+
+ cru: clock-controller at 20200000 {
+ compatible = "rockchip,rv1108-cru";
+ reg = <0x20200000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ emmc: dwmmc at 30110000 {
+ compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30110000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc at 30120000 {
+ compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30120000 0x4000>;
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc at 30130000 {
+ compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 100000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x30130000 0x4000>;
+ status = "disabled";
+ };
+
+ sfc: sfc at 301c0000 {
+ compatible = "rockchip,sfc";
+ reg = <0x301c0000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ pinctrl-0 = <&sfc_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ gmac: ethernet at 30200000 {
+ compatible = "rockchip,rv1108-gmac";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ phy-mode = "rmii";
+ max-speed = <100>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller at 32010000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x32011000 0x1000>,
+ <0x32012000 0x1000>,
+ <0x32014000 0x2000>,
+ <0x32016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rv1108-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0 at 20030000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20030000 0x100>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 at 10310000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10310000 0x100>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 at 10320000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10320000 0x100>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3 at 10330000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x10330000 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ gmac {
+ rmii_pins: rmii-pins {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
+ <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>,
+ <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
+ <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
+ <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>,
+ <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>,
+ <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>,
+ <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ i2c2m1 {
+ i2c2m1_xfer: i2c2m1-xfer {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+ <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+ };
+
+ i2c2m1_gpio: i2c2m1-gpio {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ i2c2m05v {
+ i2c2m05v_xfer: i2c2m05v-xfer {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+ <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ i2c2m05v_gpio: i2c2m05v-gpio {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sfc {
+ sfc_pins: sfc-pins {
+ rockchip,pins = <2 RK_PA3 RK_FUNC_3 &pcfg_pull_none>,
+ <2 RK_PA2 RK_FUNC_3 &pcfg_pull_none>,
+ <2 RK_PA1 RK_FUNC_3 &pcfg_pull_none>,
+ <2 RK_PA0 RK_FUNC_3 &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_2 &pcfg_pull_none>,
+ <2 RK_PB4 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_cd: sdmmc-cd {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+ <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+ <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart01rts: uart1-rts {
+ rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2m0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+ <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2m1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+ <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2_5v {
+ uart2_5v_cts: uart2_5v-cts {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart2_5v_rts: uart2_5v-rts {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-rockchip/rv1108/Kconfig b/arch/arm/mach-rockchip/rv1108/Kconfig
index 40237bb..e6cba66 100644
--- a/arch/arm/mach-rockchip/rv1108/Kconfig
+++ b/arch/arm/mach-rockchip/rv1108/Kconfig
@@ -1,9 +1,28 @@
if ROCKCHIP_RV1108
+config TARGET_EVB_RV1108
+ bool "EVB_RV1108"
+ help
+ RV1108 EVB is a evaluation board for Rockchp RV1108.
+
+ Key features of the board include:
+ * one macro USB OTG port
+ * one USB HOST port
+ * one RS232 to USB port route to UART2 as debug port
+ * MIPI screen with resolution 720 x 1280
+ * 128M DDR3
+ * 64M SPI Nor Flash
+ * macro SD card interface
+ * HDMI output
+ * 10/100 Mbps Ethernet
+ * camera interface compatible with imx323 / ov2710 / ov4689
+
config SYS_SOC
default "rockchip"
config SYS_MALLOC_F_LEN
default 0x400
+source board/rockchip/evb_rv1108/Kconfig
+
endif
diff --git a/board/rockchip/evb_rv1108/Kconfig b/board/rockchip/evb_rv1108/Kconfig
new file mode 100644
index 0000000..4a76e0b
--- /dev/null
+++ b/board/rockchip/evb_rv1108/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_EVB_RV1108
+
+config SYS_BOARD
+ default "evb_rv1108"
+
+config SYS_VENDOR
+ default "rockchip"
+
+config SYS_CONFIG_NAME
+ default "evb_rv1108"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
diff --git a/board/rockchip/evb_rv1108/MAINTAINERS b/board/rockchip/evb_rv1108/MAINTAINERS
new file mode 100644
index 0000000..94def32
--- /dev/null
+++ b/board/rockchip/evb_rv1108/MAINTAINERS
@@ -0,0 +1,6 @@
+EVB-RV1108
+M: Andy Yan <andy.yan at rock-chips.com>
+S: Maintained
+F: board/rockchip/evb_rv1108
+F: include/configs/evb_rv1108.h
+F: configs/evb-rv1108_defconfig
diff --git a/board/rockchip/evb_rv1108/Makefile b/board/rockchip/evb_rv1108/Makefile
new file mode 100644
index 0000000..dd99054
--- /dev/null
+++ b/board/rockchip/evb_rv1108/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += evb_rv1108.o
diff --git a/board/rockchip/evb_rv1108/README b/board/rockchip/evb_rv1108/README
new file mode 100644
index 0000000..5889596
--- /dev/null
+++ b/board/rockchip/evb_rv1108/README
@@ -0,0 +1,47 @@
+Here is the step-by-step to boot U-Boot on rv1108 evb.
+
+Get ddr init binary
+==============================================================================
+ > git clone https://github.com/rockchip-linux/rkbin.git
+ > dd if=./rkbin/rv1x/rv1108ddr.bin of=ddr.bin bs=4 skip=1
+
+Compile U-Boot
+===========================
+ > make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig all
+ > ./tools/mkimage -n rv1108 -T rksd -d ddr.bin spl.bin
+ > cat spl.bin u-boot.bin > u-boot.img
+
+Flash the image by rkdeveloptool
+================================
+rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git
+
+Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
+ > rkdeveloptool db ./rkbin/rv1x/RV1108_usb_boot.bin
+ > rkdeveloptool wl 0x40 u-boot.img
+ > rkdeveloptool RD
+
+You should be able to get U-Boot log message from boot console:
+
+DDR Version V1.02 20170220
+In
+400MHz
+DDR3
+Bus Width=16 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=512MB
+mach:2
+OUT
+
+
+U-Boot 2017.05-00693-g3a5b171 (Jun 01 2017 - 17:37:53 +0800)
+
+Model: Rockchip RV1108 Evaluation board
+DRAM: 128 MiB
+APLL: 600000000 DPLL:792000000 GPLL:384000000
+MMC:
+Using default environment
+
+In: serial at 10210000
+Out: serial at 10210000
+Err: serial at 10210000
+Net: No ethernet found.
+Hit any key to stop autoboot: 0
+=>
diff --git a/board/rockchip/evb_rv1108/evb_rv1108.c b/board/rockchip/evb_rv1108/evb_rv1108.c
new file mode 100644
index 0000000..fe37eac
--- /dev/null
+++ b/board/rockchip/evb_rv1108/evb_rv1108.c
@@ -0,0 +1,52 @@
+/*
+ * (C)Copyright 2016 Rockchip Electronics Co., Ltd
+ * Authors: Andy Yan <andy.yan at rock-chips.com>
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fdtdec.h>
+#include <asm/arch/grf_rv1108.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mach_cpu_init(void)
+{
+ int node;
+ struct rv1108_grf *grf;
+
+ node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rv1108-grf");
+ grf = (struct rv1108_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg");
+
+ /*evb board use UART2 m0 for debug*/
+ rk_clrsetreg(&grf->gpio2d_iomux,
+ GPIO2D2_MASK | GPIO2D1_MASK,
+ GPIO2D2_UART2_SOUT_M0 << GPIO2D2_SHIFT |
+ GPIO2D1_UART2_SIN_M0 << GPIO2D1_SHIFT);
+ rk_clrreg(&grf->gpio3c_iomux, GPIO3C3_MASK | GPIO3C2_MASK);
+
+ return 0;
+}
+
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = 0x8000000;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = 0x60000000;
+ gd->bd->bi_dram[0].size = 0x8000000;
+
+ return 0;
+}
diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig
new file mode 100644
index 0000000..3fa1ae8
--- /dev/null
+++ b/configs/evb-rv1108_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ROCKCHIP_RV1108=y
+CONFIG_TARGET_EVB_RV1108=y
+CONFIG_DEFAULT_DEVICE_TREE="rv1108-evb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RV1108=y
+CONFIG_RAM=y
+CONFIG_BAUDRATE=1500000
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x10210000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/evb_rv1108.h b/include/configs/evb_rv1108.h
new file mode 100644
index 0000000..ff3531b
--- /dev/null
+++ b/include/configs/evb_rv1108.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/rv1108_common.h>
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ipaddr=172.16.12.50\0" \
+ "serverip=172.16.12.69\0" \
+ ""
+#define CONFIG_BOOTCOMMAND \
+ "sf probe;" \
+ "sf read 0x62000000 0x140800 0x500000;" \
+ "dcache off;" \
+ "go 0x62000000"
+
+#endif
--
2.7.4
More information about the U-Boot
mailing list