[U-Boot] [PATCH v7 09/10] ARM: dts: STiH410: update ehci and ohci compatible

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

Update ehci and ohci node's compatible string in order to
use ehci-generic and ohci-generic drivers.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
v7:	_ none

 arch/arm/dts/stih410.dtsi | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi
index f118a9e..b59b110 100644
--- a/arch/arm/dts/stih410.dtsi
+++ b/arch/arm/dts/stih410.dtsi
@@ -83,7 +83,7 @@
 		};
 
 		ohci0: usb at 9a03c00 {
-			compatible = "st,st-ohci-300x";
+			compatible = "generic-ohci";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -91,6 +91,7 @@
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
+
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
 
@@ -98,7 +99,7 @@
 		};
 
 		ehci0: usb at 9a03e00 {
-			compatible = "st,st-ehci-300x";
+			compatible = "generic-ehci";
 			reg = <0x9a03e00 0x100>;
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
@@ -115,7 +116,7 @@
 		};
 
 		ohci1: usb at 9a83c00 {
-			compatible = "st,st-ohci-300x";
+			compatible = "generic-ohci";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
@@ -123,6 +124,7 @@
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
+
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
 
@@ -130,7 +132,7 @@
 		};
 
 		ehci1: usb at 9a83e00 {
-			compatible = "st,st-ehci-300x";
+			compatible = "generic-ehci";
 			reg = <0x9a83e00 0x100>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
@@ -140,6 +142,7 @@
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
+
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
 
-- 
1.9.1