[U-Boot] [PATCH v6 00/10] STiH410-B2260: add reset, usb and fastboot support

[Patrice CHOTARD]

A v7 has been submitted to use last livetree update from Simon Glass

On 05/30/2017 11:03 AM, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
> 
> This series adds :
> 	_ update existing sdhci driver to use reset framework
> 	_ add usb phy driver
> 	_ add fastboot support
> 
> With all this feature enable, it's now possible to
> 	_ boot on usb mass storage device
> 	_ boot from kernel image and dtb previously loaded using tftp
> 	_ update mmc partiton using fastboot
> 
> 
> v6:	_ generic ehci/ohci drivers extension has been send separately
> 	_ add reviewed-by Simon Glass
> 
> v5:     _ extend generic ehci with phy
> 	_ extend generic ohci with clock, reset and phy
> 	_ remove specifi STi ehci and ohci drivers and use generic ohci/ehci
>            ones
> 	_ update stih410-b2260 device tree to use ehci and ohci generic
> 	  drivers
> 
> v4:     _ use PHY uclass currently available on dm-next branch,
> 	  update sti ehci, ohci and xhci drivers to use new PHY uclass.
> 
> v3:	_ remove reset driver (already applied on u-boot-dm tree by Simon
> 	  Glass)
> 	_ patch 4: add new USB PHY uclass requested by Simon Glass
> 	_ patch 5: convert STi usb phy driver to new USB PHY uclass
> 	_ patch 6/7: update echi/ohci drivers to use USB PHY uclass
> 	_ patch 8/9: rework xhci-sti.c and dwc3-sti.c. Previously, xhci-sti driver binded
> 	  dwc3-sti (STi glue driver) which was not correct. Now we respect the device
> 	  tree hierarchy, ie the STi dwc3 glue driver is first probed, then bind the
> 	  xhci-sti driver.
> 	
> v2:	_ add Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com> in patches 2,3 and 4
> 	_ fix remarks done by Marek Vasut :
> 		_ patch 5 : replace bitfield_replace() by clrsetbits_le32()
> 		_ patch 6 : update error messages and add remove callback
> 		_ patch 8 : put board specific defines in a separate patch
> 		_ patch 7: use setbits_le32() instead of read, modify, write
> 		  sequence and add missing parenthesis
> 		_ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21
> 		  in patch 14
> 		
> 
> Patrice Chotard (10):
>    mmc: sti_sdhci: Rework sti_mmc_core_config()
>    ARM: dts: stih410-family: Add missing reset_names for mmc1 node
>    mmc: sti_sdhci: Use reset framework
>    usb: phy: Add STi USB2 PHY
>    STiH410-B2260: enable USB Host Networking
>    STiH410-B2260: enable USB, fastboot, reset, PHY related flags
>    usb: dwc3: Add dwc3 glue driver support for STi
>    ARM: dts: STiH410: set DWC3 dual role mode to peripheral
>    ARM: dts: STiH410: update ehci and ohci compatible
>    board: STiH410-B2260: add fastboot support
> 
>   arch/arm/dts/stih407-family.dtsi                 |   3 +-
>   arch/arm/dts/stih410.dtsi                        |  11 +-
>   arch/arm/include/asm/arch-stih410/sys_proto.h    |  11 +
>   board/st/stih410-b2260/board.c                   |  41 ++++
>   configs/stih410-b2260_defconfig                  |  39 +++-
>   doc/device-tree-bindings/phy/phy-stih407-usb.txt |  24 +++
>   doc/device-tree-bindings/usb/dwc3-st.txt         |  60 ++++++
>   drivers/mmc/sti_sdhci.c                          |  56 +++--
>   drivers/phy/Kconfig                              |   8 +
>   drivers/phy/Makefile                             |   1 +
>   drivers/phy/sti_usb_phy.c                        | 181 ++++++++++++++++
>   drivers/usb/host/Kconfig                         |   9 +
>   drivers/usb/host/Makefile                        |   1 +
>   drivers/usb/host/dwc3-sti-glue.c                 | 256 +++++++++++++++++++++++
>   include/configs/stih410-b2260.h                  |  16 ++
>   include/dwc3-sti-glue.h                          |  43 ++++
>   16 files changed, 730 insertions(+), 30 deletions(-)
>   create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h
>   create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt
>   create mode 100644 doc/device-tree-bindings/usb/dwc3-st.txt
>   create mode 100644 drivers/phy/sti_usb_phy.c
>   create mode 100644 drivers/usb/host/dwc3-sti-glue.c
>   create mode 100644 include/dwc3-sti-glue.h
>