[U-Boot] [PATCH v2 3/6] arch/arm/dts: Add Turris Omnia device tree
Marek Behun
marek.behun at nic.cz
Fri Jun 2 16:58:56 UTC 2017
From: Marek Behún <marek.behun at nic.cz>
This device tree is taken from mainline Linux kernel commit
7b7db5ab with certain modifications:
- aliases for I2C devices are added, because u-boot i2cmux
doesn't work otherwise
- the ATSHA204A node is added in the i2c at 5 node
- "u-boot,dm-pre-reloc"s are added in needed nodes for SPL
build to work correctly
Signed-off-by: Marek Behun <marek.behun at nic.cz>
create mode 100644 arch/arm/dts/armada-385-turris-omnia.dts
diff --git a/arch/arm/dts/armada-385-turris-omnia.dts b/arch/arm/dts/armada-385-turris-omnia.dts
new file mode 100644
index 0000000000..f1937a3d93
--- /dev/null
+++ b/arch/arm/dts/armada-385-turris-omnia.dts
@@ -0,0 +1,410 @@
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe at kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc at gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Turris Omnia";
+ compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2cmux;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1024 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+ internal-regs {
+
+ /* USB part of the PCIe2/USB 2.0 port */
+ usb at 58000 {
+ status = "okay";
+ };
+
+ sata at a8000 {
+ status = "okay";
+ };
+
+ sdhci at d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ status = "okay";
+
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ usb3 at f0000 {
+ status = "okay";
+ };
+
+ usb3 at f8000 {
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie at 2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+
+ pcie at 3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
+
+/* Connected to 88E6176 switch, port 6 */
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ status = "okay";
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+/* Connected to 88E6176 switch, port 5 */
+ð1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+/* WAN port */
+ð2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&phy1>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ i2cmux: i2cmux at 70 {
+ compatible = "nxp,pca9547";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+
+ /* STM32F0 command interface at address 0x2a */
+ /* leds device (in STM32F0) at address 0x2b */
+
+ eeprom at 54 {
+ compatible = "at,24c64";
+ reg = <0x54>;
+
+ /* The EEPROM contains data for bootloader.
+ * Contents:
+ * struct omnia_eeprom {
+ * u32 magic; (=0x0341a034 in LE)
+ * u32 ramsize; (in GiB)
+ * char regdomain[4];
+ * u32 crc32;
+ * };
+ */
+ };
+ };
+
+ i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ u-boot,dm-pre-reloc;
+
+ /* routed to PCIe0/mSATA connector (CN7A) */
+ };
+
+ i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ /* routed to PCIe1/USB2 connector (CN61A) */
+ };
+
+ i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ /* routed to PCIe2 connector (CN62A) */
+ };
+
+ i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ /* routed to SFP+ */
+ };
+
+ i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ u-boot,dm-pre-reloc;
+
+ /* ATSHA204A at address 0x64 */
+ atsha204a at 64 {
+ u-boot,dm-pre-reloc;
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
+ };
+
+ i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ /* exposed on pin header */
+ };
+
+ i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ pcawan: gpio at 71 {
+ /*
+ * GPIO expander for SFP+ signals and
+ * and phy irq
+ */
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcawan_pins>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+
+ phy1: phy at 1 {
+ status = "okay";
+ compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+
+ /* irq is connected to &pcawan pin 7 */
+ };
+
+ /* Switch MV88E6176 at address 0x10 */
+ switch at 10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dsa,member = <0 0>;
+
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports at 0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ ports at 1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ ports at 2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ ports at 3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ ports at 4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ ports at 5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ /* port 6 is connected to eth0 */
+ };
+ };
+};
+
+&pinctrl {
+ pcawan_pins: pcawan-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ spi0cs0_pins: spi0cs0-pins {
+ marvell,pins = "mpp25";
+ marvell,function = "spi0";
+ };
+
+ spi0cs1_pins: spi0cs1-pins {
+ marvell,pins = "mpp26";
+ marvell,function = "spi0";
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ spi-nor at 0 {
+ compatible = "spansion,s25fl164k", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ u-boot,dm-pre-reloc;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ reg = <0x0 0x00100000>;
+ label = "U-Boot";
+ };
+
+ partition at 100000 {
+ reg = <0x00100000 0x00700000>;
+ label = "Rescue system";
+ };
+ };
+ };
+
+ /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+};
+
+&uart0 {
+ /* Pin header CN10 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+ /* Pin header CN11 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
--
2.13.0
More information about the U-Boot
mailing list