[U-Boot] [PATCH v2 0/4] mips: bmips: add HSSPI support

[Álvaro Fernández Rojas]

BCM63xx HSSPI controller has the same issue as BCM63xx SPI controller: it
doesn't allow keeping CS active between transfers.
However, this controller allows changing CS polarities, which is used in the
linux upstream driver to manage CS as desired.

v2: Introduce changes suggested by Simon Glass:
 - Split bcm63xx_hsspi_xfer() into smaller functions.
 - Check possible clock errors.
 - Check possible reset errors.
 - Switch to devfdt_get_addr_size_index().
 - Use setbits32_be() for clock gate.

Álvaro Fernández Rojas (4):
  dm: spi: add BCM63xx HSSPI driver
  mips: bmips: add bcm63xx-hsspi driver support for BCM6328
  mips: bmips: add bcm63xx-hsspi driver support for BCM63268
  mips: bmips: enable the SPI flash on the Comtrend AR-5387un

 arch/mips/dts/brcm,bcm63268.dtsi        |  21 ++
 arch/mips/dts/brcm,bcm6328.dtsi         |  24 ++
 arch/mips/dts/comtrend,ar-5387un.dts    |  12 +
 configs/comtrend_ar5387un_ram_defconfig |   8 +
 drivers/spi/Kconfig                     |   8 +
 drivers/spi/Makefile                    |   1 +
 drivers/spi/bcm63xx_hsspi.c             | 413 ++++++++++++++++++++++++++++++++
 7 files changed, 487 insertions(+)
 create mode 100644 drivers/spi/bcm63xx_hsspi.c

-- 
2.1.4