[U-Boot] [PATCH 4/6] powerpc: mpc8536ds: Enable DHCP command by default

York Sun york.sun at nxp.com
Sun Jun 4 01:34:04 UTC 2017


Enable DHCP command to make TFTP easier. Users don't have to use
static IP address.

Signed-off-by: York Sun <york.sun at nxp.com>
---

 configs/MPC8536DS_36BIT_defconfig | 1 +
 configs/MPC8536DS_defconfig       | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig
index 106a37d..d002cda 100644
--- a/configs/MPC8536DS_36BIT_defconfig
+++ b/configs/MPC8536DS_36BIT_defconfig
@@ -9,6 +9,7 @@ CONFIG_BOOTDELAY=10
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig
index e835d6a..8f7cbb6 100644
--- a/configs/MPC8536DS_defconfig
+++ b/configs/MPC8536DS_defconfig
@@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=10
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
-- 
2.7.4



More information about the U-Boot mailing list