[U-Boot] [PATCH] arm64: ls1043ardb: Add distro secure boot support

Sumit Garg sumit.garg at nxp.com
Mon Jun 5 18:21:51 UTC 2017


Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment. Disable fall back option to
nor/qspi boot in case of secure boot. Also enable "secureboot=y"
flag in environment for ARM based platforms instead of bootcmd.

Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
Tested-by: Vinitha Pillai <vinitha.pillai at nxp.com>
---
 board/freescale/common/fsl_chain_of_trust.c     |  6 ++++++
 configs/ls1043ardb_SECURE_BOOT_defconfig        |  1 +
 configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig |  1 +
 include/configs/ls1043a_common.h                | 23 +++++++++++++++++++++--
 4 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index 438e781..609e2b2 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -80,7 +80,13 @@ int fsl_setenv_chain_of_trust(void)
 	 * bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)
 	 */
 	setenv("bootdelay", "0");
+
+#ifdef CONFIG_ARM
+	setenv("secureboot", "y");
+#else
 	setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD);
+#endif
+
 	return 0;
 }
 #endif
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 861d49b..3f535cc 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -40,3 +40,4 @@ CONFIG_USB_STORAGE=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 5f9b21d..2d57e79 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -56,3 +56,4 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_SPL_CRYPTO_SUPPORT=y
 CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index e8a756f..6e30427 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -282,6 +282,7 @@
 	"fdt_addr=0x64f00000\0"		 \
 	"kernel_addr=0x65000000\0"		\
 	"scriptaddr=0x80000000\0"	       \
+	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"      \
 	"kernel_addr_r=0x81000000\0"	    \
@@ -292,6 +293,7 @@
 	"mtdparts=" MTDPARTS_DEFAULT "\0"	\
 	BOOTENV					\
 	"boot_scripts=ls1043ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1043ardb_bs.out\0"	\
 	"scan_dev_for_boot_part="	       \
 	     "part list ${devtype} ${devnum} devplist; "   \
 	     "env exists devplist || setenv devplist 1; "  \
@@ -302,6 +304,21 @@
 		      "run scan_dev_for_boot; "	    \
 		  "fi; "				   \
 	      "done\0"					  \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
 	"installer=load mmc 0:2 $load_addr "	  \
 		   "/flex_installer_arm64.itb; "	  \
 		   "bootm $load_addr#ls1043ardb\0"	  \
@@ -315,9 +332,11 @@
 
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run qspi_bootcmd;"
 #else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run nor_bootcmd"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run nor_bootcmd;"
 #endif
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
-- 
1.9.1



More information about the U-Boot mailing list