[U-Boot] [RFC PATCH 0/5] move boot0 hook in the beginning for armv7
Simon Glass
sjg at chromium.org
Tue Jun 6 21:08:21 UTC 2017
Hi Kever,
On 31 May 2017 at 04:50, Kever Yang <kever.yang at rock-chips.com> wrote:
>
> I think the boot0 hook is suppose to add some data in the very beginning
> of the SPL image, am I right?
>
> Rockchip SoCs bootrom design is like this:
> - First 2KB or 4KB internal memory is for bootrom stack and heap;
> - Then the first 4-byte suppose to be a TAG like 'RK33';
> - The the following memory address end with '0004' is the first
> instruction load and running by bootrom;
>
> Example for RK3288:
> Before this patch set, the SPL_TEXT_BASE is ff704004, and image write to
> media device after mkimage like this:
>
> ff704000: 32334b52 00000000 00000000 00000000 RK32............
> ff704010: 00000000 00000000 00000000 00000000 ................
> ff704020: ea00000f e59ff014 e59ff014 e59ff014 ................
> ff704030: e59ff014 e59ff014 e59ff014 e59ff014 ................
>
> Where the first instruction from bootrom is '00000000', which is a
> undefined instruction.
> The '_start' and 'reset' have to align to 0x20 for the requirement of
> VBAR, the memory offset '004'~'01c' are filled with '00000000'.
>
> We can use the boot0 hook to fix this issue, after this patch set,
> the SPL_TEXT_BASE is ff704000 and image write to media device after
> mkimage like this:
>
> ff704000: 32334b52 ea00001d e320f000 e320f000 RK32...... ... .
> ff704010: e320f000 e320f000 e320f000 e320f000 .. ... ... ... .
> ff704020: ea000016 e59ff014 e59ff014 e59ff014 ................
> ff704030: e59ff014 e59ff014 e59ff014 e59ff014 ................
>
> The first instruction from bootrom is a 'b reset', and memory of
> '008'~'01c' are filled with 'nop' instruction.
>
> This patch set does not provide patch for socfpga, bcm and sunxi SoCs which also
> enable BOOT0_HOOK, so this is a RFC patch, please advice how to make it
> compatible with those three platforms.
>
>
>
> Kever Yang (5):
> armv7: move boot hook before '_start'
> rockchip: boot0: align to 0x20 for armv7 '_start'
> rockchip: enable BOOT0_HOOK for SoCs
> rockchip: configs: use aligned address for SPL_TEXT_BASE
> rockchip: mkimage: use spl_boot0 for all Rockchip SoCs
>
> arch/arm/include/asm/arch-rockchip/boot0.h | 9 ++++++++-
> arch/arm/lib/vectors.S | 19 ++++++++++---------
> arch/arm/mach-rockchip/Kconfig | 3 +++
> include/configs/rk3036_common.h | 2 +-
> include/configs/rk3288_common.h | 2 +-
> tools/rkcommon.c | 8 ++++----
> 6 files changed, 27 insertions(+), 16 deletions(-)
>
> --
> 1.9.1
>
Do will still need this series now that (I think) we have a fix for
the return-to-brom feature in u-boot-rockchip/master?
Regards,
Simon
More information about the U-Boot
mailing list