[U-Boot] [PATCH 1/2] power: pmic: tps65218: Add DCDC3 configuration

[Jaehoon Chung]

On 06/02/2017 06:30 PM, Keerthy wrote:
> Some boards like am437x-gp-evm require dcdc3 also to be configured
> as it feeds on to ddr. Hence add the capability as well.
> 
> Signed-off-by: Keerthy <j-keerthy at ti.com>

Applied to u-boot-mmc for pmic. Thanks!

Best Regards,
Jaehoon Chung

> ---
>  drivers/power/pmic/pmic_tps65218.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c
> index c5e768a..911f639 100644
> --- a/drivers/power/pmic/pmic_tps65218.c
> +++ b/drivers/power/pmic/pmic_tps65218.c
> @@ -96,7 +96,8 @@ int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
>  int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
>  {
>  	if ((dc_cntrl_reg != TPS65218_DCDC1) &&
> -	    (dc_cntrl_reg != TPS65218_DCDC2))
> +	    (dc_cntrl_reg != TPS65218_DCDC2) &&
> +	    (dc_cntrl_reg != TPS65218_DCDC3))
>  		return 1;
>  
>  	/* set voltage level */
>