[U-Boot] [PATCH] imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL

[Fabio Estevam]

On Fri, Jun 9, 2017 at 5:13 PM, Stefan Agner <stefan at agner.ch> wrote:
> From: Stefan Agner <stefan.agner at toradex.com>
>
> i.MX 6UL and 6ULL have different boot device capabilities and
> use therefor use a different boot device selection table than
> other i.MX 6 devices. Particularly, the value which has been
> used so far (b0001) is assigned to QSPI boot for these two
> devices.
>
> There is no common reserved value for all i.MX 6devices. Use
> b0010 for i.MX 6UL and 6ULL via compile time ifdef.
>
> Reported-by: Joël Esponde <joel.esponde at honeywell.com>
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>