[U-Boot] [PATCH v6 3/3] GPT: provide commands to selectively rename partitions
alison at peloton-tech.com
alison at peloton-tech.com
Sat Jun 10 23:33:37 UTC 2017
From: Alison Chaiken <alison at peloton-tech.com>
This patch provides support in u-boot for renaming GPT
partitions. The renaming is accomplished via new 'gpt swap'
and 'gpt rename' commands.
The 'swap' mode prints a warning if no matching partition names
are found. If only one matching name of a provided pair is found, it
renames the matching partitions to the new name.
Rewriting the partition table has the side-effect that all partitions
end up with "msftdata" flag set. The reason is that partition type
PARTITION_BASIC_DATA_GUID is hard-coded in the gpt_fill_pte()
function. This does not appear to cause any harm.
Changes since v5:
-- The former 'gpt flip' is now 'gpt swap', which takes the two
arbitrary partition names it exchanges as command-line input.
-- A new command, 'gpt rename', now allows renaming of single,
specified partitions.
-- Updated README.gpt to reflect the changes.
Signed-off-by: Alison Chaiken <alison at peloton-tech.com>
---
cmd/Kconfig | 8 ++
cmd/gpt.c | 239 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
doc/README.gpt | 20 ++++-
3 files changed, 261 insertions(+), 6 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 412bf24..7b262de 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -595,6 +595,14 @@ config CMD_GPT
Enable the 'gpt' command to ready and write GPT style partition
tables.
+config CMD_GPT_RENAME
+ bool "GPT partition renaming commands"
+ depends on CMD_GPT
+ help
+ Enables the 'gpt' command to interchange names on two GPT
+ partitions via the 'gpt swap' command or to rename single
+ partitions via the 'rename' command.
+
config CMD_ARMFLASH
#depends on FLASH_CFI_DRIVER
bool "armflash"
diff --git a/cmd/gpt.c b/cmd/gpt.c
index 669031f8..aa3245a 100644
--- a/cmd/gpt.c
+++ b/cmd/gpt.c
@@ -20,6 +20,9 @@
#include <div64.h>
#include <memalign.h>
#include <linux/compat.h>
+#include <linux/sizes.h>
+
+extern int atoi(const char *nptr);
static LIST_HEAD(disk_partitions);
@@ -194,16 +197,33 @@ static struct disk_part *allocate_disk_part(disk_partition_t *info, int partnum)
return newpart;
}
+static void prettyprint_part_size(char *sizestr, unsigned long partsize,
+ unsigned long blksize)
+{
+ unsigned long long partbytes;
+ unsigned long partmegabytes;
+
+ partbytes = partsize * blksize;
+ partmegabytes = lldiv(partbytes, SZ_1M);
+ snprintf(sizestr, 16, "%luMiB", partmegabytes);
+}
+
static void print_gpt_info(void)
{
struct list_head *pos;
struct disk_part *curr;
+ char partstartstr[16];
+ char partsizestr[16];
list_for_each(pos, &disk_partitions) {
curr = list_entry(pos, struct disk_part, list);
+ prettyprint_part_size(partstartstr, (unsigned long)curr->gpt_part_info.start,
+ (unsigned long) curr->gpt_part_info.blksz);
+ prettyprint_part_size(partsizestr, (unsigned long)curr->gpt_part_info.size,
+ (unsigned long) curr->gpt_part_info.blksz);
+
printf("Partition %d:\n", curr->partnum);
- printf("1st block %x, size %x\n", (unsigned)curr->gpt_part_info.start,
- (unsigned)curr->gpt_part_info.size);
+ printf("Start %s, size %s\n", partstartstr, partsizestr);
printf("Block size %lu, name %s\n", curr->gpt_part_info.blksz,
curr->gpt_part_info.name);
printf("Type %s, bootable %d\n", curr->gpt_part_info.type,
@@ -215,6 +235,74 @@ static void print_gpt_info(void)
}
}
+#ifdef CONFIG_CMD_GPT_RENAME
+static int calc_parts_list_len(int numparts)
+{
+ int partlistlen = UUID_STR_LEN + 1 + strlen("uuid_disk=");
+ /* for the comma */
+ partlistlen++;
+
+ /* per-partition additions; numparts starts at 1, so this should be correct */
+ partlistlen += numparts * (strlen("name=,") + PART_NAME_LEN + 1);
+ /* see part.h for definition of struct disk_partition */
+ partlistlen += numparts * (strlen("start=MiB,") + sizeof(lbaint_t) + 1);
+ partlistlen += numparts * (strlen("size=MiB,") + sizeof(lbaint_t) + 1);
+ partlistlen += numparts * (strlen("uuid=;") + UUID_STR_LEN + 1);
+ /* for the terminating null */
+ partlistlen++;
+ debug("Length of partitions_list is %d for %d partitions\n", partlistlen,
+ numparts);
+ return partlistlen;
+}
+
+/*
+ * create the string that upstream 'gpt write' command will accept as an
+ * argument
+ *
+ * From doc/README.gpt, Format of partitions layout:
+ * "uuid_disk=...;name=u-boot,size=60MiB,uuid=...;
+ * name=kernel,size=60MiB,uuid=...;"
+ * The fields 'name' and 'size' are mandatory for every partition.
+ * The field 'start' is optional. The fields 'uuid' and 'uuid_disk'
+ * are optional if CONFIG_RANDOM_UUID is enabled.
+ */
+static int create_gpt_partitions_list(int numparts, const char *guid, char *partitions_list)
+{
+ struct list_head *pos;
+ struct disk_part *curr;
+ char partstr[PART_NAME_LEN + 1];
+
+ if (!partitions_list)
+ return -1;
+
+ strcpy(partitions_list, "uuid_disk=");
+ strncat(partitions_list, guid, UUID_STR_LEN + 1);
+ strcat(partitions_list, ";");
+
+ list_for_each(pos, &disk_partitions) {
+ curr = list_entry(pos, struct disk_part, list);
+ strcat(partitions_list, "name=");
+ strncat(partitions_list, (const char *)curr->gpt_part_info.name, PART_NAME_LEN + 1);
+ strcat(partitions_list, ",start=");
+ prettyprint_part_size(partstr, (unsigned long)curr->gpt_part_info.start,
+ (unsigned long) curr->gpt_part_info.blksz);
+ /* one extra byte for NULL */
+ strncat(partitions_list, partstr, PART_NAME_LEN + 1);
+ strcat(partitions_list, ",size=");
+ /* lbaint_t is unsigned long, per include/ide.h */
+ prettyprint_part_size(partstr, (unsigned long)curr->gpt_part_info.size,
+ (unsigned long) curr->gpt_part_info.blksz);
+ strncat(partitions_list, partstr, PART_NAME_LEN + 1);
+
+ strcat(partitions_list, ",uuid=");
+ strncat(partitions_list, (const char *)curr->gpt_part_info.uuid,
+ UUID_STR_LEN + 1);
+ strcat(partitions_list, ";");
+ }
+ return 0;
+}
+#endif
+
/*
* read partition info into disk_partitions list where
* it can be printed or modified
@@ -226,8 +314,11 @@ static int get_gpt_info(struct blk_desc *dev_desc)
disk_partition_t info;
struct disk_part *new_disk_part;
- if (disk_partitions.next == NULL)
- INIT_LIST_HEAD(&disk_partitions);
+ /*
+ * Always re-read partition info from device, in case
+ * it has changed
+ */
+ INIT_LIST_HEAD(&disk_partitions);
for (p = 1; p <= MAX_SEARCH_PARTITIONS; p++) {
ret = part_get_info(dev_desc, p, &info);
@@ -302,6 +393,8 @@ static int set_gpt_info(struct blk_desc *dev_desc,
return -1;
str = strdup(str_part);
+ if (str == NULL)
+ return -ENOMEM;
/* extract disk guid */
s = str;
@@ -531,6 +624,126 @@ static int do_disk_guid(struct blk_desc *dev_desc, char * const namestr)
return ret;
}
+#ifdef CONFIG_CMD_GPT_RENAME
+static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm,
+ char *name1, char *name2)
+{
+ struct list_head *pos;
+ struct disk_part *curr;
+ disk_partition_t *new_partitions = NULL;
+ char disk_guid[UUID_STR_LEN + 1];
+ char *partitions_list, *str_disk_guid;
+ u8 part_count = 0;
+ int partlistlen, ret, numparts = 0, partnum, i = 1, changed = 0;
+
+ if ((subcomm == NULL) || (name1 == NULL) || (name2 == NULL) ||
+ (strcmp(subcomm, "swap") && (strcmp(subcomm, "rename"))))
+ return -EINVAL;
+
+ ret = get_disk_guid(dev_desc, disk_guid);
+ if (ret < 0)
+ return ret;
+
+ numparts = get_gpt_info(dev_desc);
+ if (numparts < 0)
+ return numparts;
+
+ partlistlen = calc_parts_list_len(numparts);
+ partitions_list = (char *)malloc(partlistlen);
+ memset(partitions_list, '\0', partlistlen);
+
+ ret = create_gpt_partitions_list(numparts, (const char *) disk_guid,
+ partitions_list);
+ if (ret < 0)
+ return ret;
+ debug("OLD partitions_list is %s with %u chars\n", partitions_list,
+ (unsigned)strlen(partitions_list));
+
+ ret = set_gpt_info(dev_desc, (const char *)partitions_list, &str_disk_guid,
+ &new_partitions, &part_count);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(subcomm, "swap")) {
+ if ((strlen(name1) > PART_NAME_LEN) || (strlen(name2) > PART_NAME_LEN)) {
+ printf("Names longer than %d characters are truncated.\n", PART_NAME_LEN);
+ return -EINVAL;
+ }
+ list_for_each(pos, &disk_partitions) {
+ curr = list_entry(pos, struct disk_part, list);
+ if (!strcmp((char *)curr->gpt_part_info.name, name1)) {
+ strcpy((char *)curr->gpt_part_info.name, name2);
+ changed++;
+ }
+ else if (!strcmp((char *)curr->gpt_part_info.name, name2)) {
+ strcpy((char *)curr->gpt_part_info.name, name1);
+ changed++;
+ }
+
+ }
+ if (changed == 0) {
+ printf("No matching partition names were found.\n");
+ return ret;
+ }
+ } else { /* rename */
+ if (strlen(name2) > PART_NAME_LEN) {
+ printf("Names longer than %d characters are truncated.\n", PART_NAME_LEN);
+ return -EINVAL;
+ }
+
+ partnum = atoi(name1);
+ if ((partnum < 0) || (partnum > numparts)) {
+ printf("Illegal partition number %s\n", name1);
+ return -EINVAL;
+ }
+ ret = part_get_info(dev_desc, partnum, new_partitions);
+ if (ret < 0)
+ return ret;
+
+ /* U-Boot partition numbering starts at 1 */
+ list_for_each(pos, &disk_partitions) {
+ curr = list_entry(pos, struct disk_part, list);
+ if (i == partnum) {
+ strcpy((char *)curr->gpt_part_info.name, name2);
+ break;
+ }
+ i++;
+ }
+ }
+
+ ret = create_gpt_partitions_list(numparts, (const char *) disk_guid, partitions_list);
+ if (ret < 0)
+ return ret;
+ debug("NEW partitions_list is %s with %u chars\n", partitions_list,
+ (unsigned)strlen(partitions_list));
+
+ ret = set_gpt_info(dev_desc, (const char *)partitions_list, &str_disk_guid,
+ &new_partitions, &part_count);
+ if (ret < 0)
+ return ret;
+
+ debug("Writing new partition table\n");
+ ret = gpt_restore(dev_desc, disk_guid, new_partitions, numparts);
+ if (ret < 0) {
+ printf("Writing new partition table failed\n");
+ return ret;
+ }
+
+ debug("Reading back new partition table\n");
+ numparts = get_gpt_info(dev_desc);
+ if (numparts < 0)
+ return numparts;
+ printf("new partition table with %d partitions is:\n", numparts);
+ print_gpt_info();
+
+ del_gpt_info();
+ free(partitions_list);
+ free(str_disk_guid);
+ free(new_partitions);
+ return ret;
+}
+#endif
+
/**
* do_gpt(): Perform GPT operations
*
@@ -548,7 +761,7 @@ static int do_gpt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
char *ep;
struct blk_desc *blk_dev_desc = NULL;
- if (argc < 4 || argc > 5)
+ if (argc < 4 || argc > 6)
return CMD_RET_USAGE;
dev = (int)simple_strtoul(argv[3], &ep, 10);
@@ -573,6 +786,11 @@ static int do_gpt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ret = do_disk_guid(blk_dev_desc, argv[4]);
} else if (strcmp(argv[1], "read") == 0) {
ret = do_get_gpt_info(blk_dev_desc);
+#ifdef CONFIG_CMD_GPT_RENAME
+ } else if ((strcmp(argv[1], "swap") == 0) ||
+ (strcmp(argv[1], "rename") == 0)) {
+ ret = do_rename_gpt_parts(blk_dev_desc, argv[1], argv[4], argv[5]);
+#endif
} else {
return CMD_RET_USAGE;
}
@@ -604,4 +822,15 @@ U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt,
" Example usage:\n"
" gpt guid mmc 0\n"
" gpt guid mmc 0 varname\n"
+#ifdef CONFIG_CMD_GPT_RENAME
+ "gpt partition renaming commands:\n"
+ "gpt swap <interface> <dev> <name1> <name2>\n"
+ " - change all partitions named name1 to name2\n"
+ " and vice-versa\n"
+ "gpt rename <interface> <dev> <part> <name>\n"
+ " - rename the specified partition\n"
+ " Example usage:\n"
+ " gpt swap mmc 0 foo bar\n"
+ " gpt rename mmc 0 3 foo\n"
+#endif
);
diff --git a/doc/README.gpt b/doc/README.gpt
index 6c5ab78..d3db8bc 100644
--- a/doc/README.gpt
+++ b/doc/README.gpt
@@ -210,6 +210,24 @@ Following line can be used to assess if GPT verification has succeed:
U-BOOT> gpt verify mmc 0 $partitions
U-BOOT> if test $? = 0; then echo "GPT OK"; else echo "GPT ERR"; fi
+Renaming GPT partitions from U-Boot:
+====================================
+
+GPT partition names are a mechanism via which userspace and U-Boot can
+communicate about software updates and boot failure. The 'gpt guid',
+'gpt read', 'gpt rename' and 'gpt swap' commands facilitate
+programmatic renaming of partitions from bootscripts by generating and
+modifying the partitions layout string. Here is an illustration of
+employing 'swap' to exchange 'primary' and 'backup' partition names:
+
+U-BOOT> gpt swap mmc 0 primary backup
+
+Afterwards, all partitions previously named 'primary' will be named
+'backup', and vice-versa. Alternatively, single partitions may be
+renamed. In this example, mmc0's first partition will be renamed
+'primary':
+
+U-BOOT> gpt rename mmc 0 1 primary
The GPT functionality may be tested with the 'sandbox' board by
creating a disk image as described under 'Block Device Emulation' in
@@ -218,7 +236,7 @@ board/sandbox/README.sandbox:
=>host bind 0 ./disk.raw
=> gpt read host 0
[ . . . ]
-=> gpt flip host 0
+=> gpt swap host 0 name othername
[ . . . ]
Partition type GUID:
--
2.1.4
More information about the U-Boot
mailing list